LuxOS changelog
LuxOS versions are numbered X.Y.Z: Y grows with every new ISO, Z with bug fixes, and every major
version carries the name of a star (currently Sirius). LuxOS is a rolling release: installed
systems update continuously with lux update, so the version tells which state the system started
from. This page is the English translation of the Czech changelog (Czech version),
with every item of every release; a few technical details (package versions) are left out.
Coming soon: what is being tested in the staging channel ›
1.0.4 "Sirius" – 2026-11-20
Bug-fix release 1.0.4 "Sirius".
Fixed
- Dock: a log for tracking down the stuck icon magnification (
luxos-desktop1.1.0-96): the Dock's output is saved to~/.local/state/luxos/dock.log, so we can see what happens when an enlarged icon gets stuck (it couldn't be reproduced yet). The Dock tests now also try leaving the Dock quickly with the pointer. - Logging in without a black flash (
luxos-desktop1.1.0-95,luxos-docs1.0.0-92): while the desktop was loading after login, the screen briefly went black. The cause was Battery Saver: after every login (and after connecting a monitor)luxos-displays autoswitched a built-in display with a higher refresh rate (e.g. 144 Hz) to 60 Hz even when the "Lower the screen to 60 Hz" option (Battery & Power) was off – and changing the refresh rate always blanks the screen for a moment. The rate now changes only with that option, and the original rate is saved so that turning Battery Saver off restores it. A second gap: when the window manager started more than 3 s after login (slow session start, cold disk), the transition ended too early and the compositor drew black until the wallpaper was painted – the transition now waits up to 6 s for the window manager (it always ends within 10 s, and input goes through it). With a compositor that starts late, the transition dissolves only after the compositor has run for 0.4 s (in its first frames it still draws a black background). The screen-capture test of the transition has a new variant with a late window manager.
1.0.3 "Sirius" – 2026-11-20
Release 1.0.3 "Sirius" with a new ISO: hundreds of fixes from a full audit of the whole system, safer backups, safe installation alongside Windows, sandboxed apps can no longer look into other windows, a fixed Calendar and Calculator, Firefox without needless connections to Mozilla, network printers only after you click Add, a new About This Computer window, windows that fit small screens, dates and numbers in your language and a LuxAI that no longer gets stuck in a loop. Installed systems get everything with lux update. Mail and the developer tools (App Studio, Icon Studio, LuxOS SDK) stay in the staging test channel for now (their changes are under Coming soon); Lux Code comes in the new version 0.6 built on Oh My Pi.
New
- New Lux Code 0.6 built on Oh My Pi (
lux-code0.6.5-3,luxos-docs90): the terminal AI coding agent is now built on the open-source Oh My Pi (MIT) with a LuxOS layer – the LuxAI account and models (/model flash,/model lite,/usagewith this month's credits), thelshshell, the offline LuxOS manual and LuxOS rules (the rightluxcommand instead ofpacman, passwords never piped tosudo). Background subagents (/hub), selecting and copying text with the mouse, the model's thinking hidden (Ctrl+T), long conversations summarized automatically, desktop, clipboard, Android and Firefox tools loaded only when needed. Thelux-codepackage replaces the testlux-code-next(thelux-code-nextcommand still works and its settings move to~/.config/lux-code) and the original Lux Code 0.1 written in LSL; the old version's data in~/.local/share/lux-codestays. Lux Code needsbunfrom Arch (installed with it). - LuxAI 2.1: conversations with the LuxAI account, thinking levels and model names (
luxai2.1.0-2): conversations are stored with the LuxAI account and also appear on lux-ai.cz (in the background; you can keep working offline; the app asks before uploading earlier conversations). Thinking levels match the server: Flash offers Low, High and Maximum, Lite Off, Low, Medium and High; a level the model does not offer drops to the nearest lower one. The app shows only "Flash" and "Lite". It also includes stopping a looping answer (one automatic retry). - Clock: alarm sounds and a glass look (
luxos-desktop1.1.0-94,luxos-i18n1.0.0-96): each alarm can have its own sound – Classic, Sunrise, Chimes, Crystal, Breeze or Pulse – or your own sound file (copied into Clock, so the alarm still rings after you delete the original). You can preview the sound in the form. Clock has a new icon and, as the first LuxOS app, a translucent frosted-glass window over the blurred wallpaper (light and dark) – let us know what you think. - LSL 0.10.15 (
lsl0.10.15-1; previously 0.10.9–0.10.14; 0.10.11 speeds up floating-point code, 0.10.12 brings security and correctness fixes: TLS verification without a server name, HTTP server limits, overflow in matrices and range,inequality, built-in modules protected; 0.10.13 fixes % and // results for floats and a crash when writing to a reset TLS connection; 0.10.14 fixes^with floats, 0.10.15 comparing a float with zero): window move and resize via the window manager, screen coordinates, window state (maximized, fullscreen), fast blur and saturation of images (cairo/gdk-pixbuf, 1920×1080 in 0.15 s), bulk pixel access and helpers for transparent rounded windows built into the gtk library. - A very bright wallpaper like on macOS: a soft shade under the menu bar and around widgets – and widgets in Desktop & Dock (
luxos-desktop79,luxos-i18n81,luxos-docs74): on an almost white wallpaper (white, beige, a white linen texture) the white text of the menu bar and the widgets was barely visible. Now – like on macOS – the wallpaper under the bar and a little below it darkens with a smooth fade (at most 38 % black at the top, gone after 128 px); it is not a darker bar but a shade under it. The white bar text stays white with at least 4.5 : 1 contrast (WCAG AA) and switches to dark only when even that is not enough. On a bright wallpaper every widget card casts a soft dark shadow, so the light card with dark text stands out from the light desktop. The strength follows the brightness of the wallpaper (computed in advance for each wallpaper – switching workspaces with the slide loads nothing and takes as long as before): ordinary wallpapers including the light Sunrise, Lagoon and all dark ones look exactly as before, and the shade goes away by itself with a normal wallpaper. It follows the wallpaper of the active workspace, in light and dark mode, with HiDPI; it needs the compositor (the default), without it the bar behaves as before. Theluxos-barplugin paints the shade into the wallpaper strip of the bar and, below the bar, into its own transparent desktop window (above the wallpaper, below widgets and windows, taking no clicks – right-click on the desktop works there too). Turn it off with Darken bright wallpaper under the menu bar and widgets in Desktop & Dock › Wallpaper orluxos-appearance desktop-scrim off(DESKTOP_SCRIM=0). Widget settings no longer need Search: Desktop & Dock has a new Widgets section with Show widgets on the desktop (it also follows changes made in the gallery) and Edit Widgets…, and the desktop menu (right-click on an empty desktop) has Edit Widgets… under Desktop Settings… (GTK moduleluxos-desktop-menuin xfdesktop, not inherited by apps started from it). The transparent edge of a widget window no longer takes clicks – they go to the desktop. Tests:test_luxos_bar_scrim.py,test_luxos_desktop_scrim_gui.py(the whole desktop under Xvfb with xfwm4, xfdesktop, the bar and widgets),test_luxos_desktop_menu.py, extendedtest_luxos_widget_glass.py. - LuxAI, Lux Code, LSL IDE and the Organization network are now proprietary – still free on LuxOS (
luxai,lux-code,lsl-ide,luxos-domain;LICENSES/, build, website): the source code of these four components moved to a private repository and new versions are released under the LuxOS proprietary license (LICENSES/LicenseRef-LuxOS-Proprietary.md, third-party components inLICENSES/NOTICE-proprietary.md). Nothing changes on LuxOS: they are still installed free of charge as signed packages from the LuxOS repository and are included in the ISO. The rest of LuxOS stays open source under GPL-3.0-or-later (with the additional permission inLICENSES/LuxOS-GPL-exception.md); versions published earlier stay under the license they were released with. Building from the public repository (./build.sh, GitHub Actions) downloads these packages from the published repository and verifies their signatures; the FAQ and the terms of use describe what is open and what is not. -
The Organization network (LuxOS AD) is a native LSL program (
luxos-domain1.0.0-4,luxos-greeter1.0.0-12):lux domain, the system-change helper and Settings › Organization Network are compiled LSL programs instead of Python – the same commands, files, SSSD/Kerberos settings and behaviour, no Python or PyGObject in the dependencies, the window opens faster. The login screen reads the domain state withlux-domain status --json(without the package, with other output or outside a domain it shows no domain line, as before). -
LuxOS News: messages from the LuxOS team right in the system (
luxos-desktop1.1.0-89,luxos-i18n93,luxos-docs84): the new LuxOS News app (luxos-news) shows announcements from the LuxOS team – a new release, planned server maintenance, important changes. New announcements also come as notifications (a click opens the app); the check runs 3 minutes after login and then every 6 hours, downloads only one file,https://luxos.lux-ai.cz/announcements.json, and sends nothing. Unread announcements are on top, important ones have an orange label and their notification stays until closed. On the first run older announcements are only shown in the app (no avalanche of notifications), at most 3 notifications per check; the Notify me about news switch turns them off. Every feed entry is checked (id, dates, text lengths,https://links only), a feed over 256 kB or with another version is dropped and no text is ever interpreted as markup. The window matches the other LuxOS apps, in 12 languages. For developers:luxos-news newandluxos-news validate(docs/developers/announcements.md); the website publishes the feedsite/announcements.json(empty for now). Tests:test_luxos_news.py,test_luxos_hub_lsl.py. - LuxAI Account: credits instead of token limits – one bar "X of 20,000 credits this month" (
luxos-account1.0.0-12,luxos-i18n95,luxos-docs87): since 19 November 2026 every LuxAI account has 20,000 credits per month shared by all models and all apps (LuxAI, Lux Code, LSL IDE) instead of monthly token limits per model (Flash 1,000,000, Lite 10,000,000); a request costs credits according to its real price. The Overview in the LuxAI Account app now shows one bar with the percentage and "12,345 of 20,000 credits this month" – the numbers always come from the server (usage.credits/usage.creditsLimitfromGET /api/me), with the thousands separator of the app language (newluxos_i18n.format_integer) – and the renewal date when it can be derived fromusage.month; an unlimited account shows "Unlimited". When the credits are used up (HTTP 429{"error": "monthly_limit", "unit": "credits"}) the message is "You've used this month's LuxAI credits. They renew on <date>." (without the date when it is unknown);luxai_account.error_text()returns the same message for apps and a limit 429 is no longer retried. An older server that sends only tokens (fastTokens/fastLimit/liteTokens/liteLimit) still gets the old Flash and Lite bars. New strings in all 12 languages (the unused "%s: %s of %s tokens" removed); Help (LuxAI account, Lux Code, Troubleshooting), the Store description, the README and the website (FAQ, Lux Code) talk about credits. Tests:test_luxai_account.py(new and old/api/meshapes,usage.month, themonthly_limiterror from a fake server),gui-account.py(Xvfb, fake server: credits bar, custom limit, used up with and without a date, unlimited, old server, cs/en). - Thunderbird is the e-mail app of LuxOS (
luxos-installer1.1.0-48,luxos-desktop1.1.0-92,luxos-docs88): new installations get Mozilla Thunderbird (packagethunderbird) with the language pack for the system language (thunderbird-i18n-cs,-de,-pt-br,-sv-se…; skipped offline or for English, never stops the installation). Thunderbird is the default app formailto:links and saved messages (message/rfc822) in/etc/xdg/luxos/mimeapps.list– your own choice in~/.config/mimeapps.listalways wins. Existing installations do not have to download 200 MB: Thunderbird is only an optional dependency ofluxos-desktop(Store › Popular apps orlux install thunderbird), the Dock has no mail launcher and an e-mail link without a mail app opens the Store with mail apps (luxos-mail-reader, Thunderbird comes before other mail apps). LuxOS Mail (luxos-mail) stays a preview app in the staging channel only. New manual page "E-mail – Thunderbird" (adding Gmail/Google Workspace and Outlook/Microsoft 365 accounts with OAuth2, other providers, default app, troubleshooting); the LuxOS Mail pages are marked as preview.
Fixed
- Text Editor: search in the sidebar (
luxos-text1.0.0-8): typing in the file tree opens a Search field at the top of the sidebar instead of a clumsy box over the bottom bar. It matches anywhere in the name, ignoring case and accents (Arch finds LuxOS-Arch); arrow keys jump to the next match, Enter opens, Esc closes. - Firefox in the system language (
luxos-installer1.1.0-49,luxos-docs1.0.0-89): the installer added no language pack for Firefox, so Firefox was always in English. It now installsfirefox-i18n-<language>for the system language together with Thunderbird's (Czech, Slovak, Polish, Ukrainian, Hungarian, German, French, Spanish, Italian, Portuguese, Dutch, Swedish and British English), and Firefox switches on its own. - Keyboard Shortcuts and Keyboard Layouts have different icons (
luxos-desktop1.1.0-93): both apps showed the same keyboard picture in Launchpad and the Dock; Keyboard Shortcuts now has the ⌘ icon. The LuxOS News icon is redrawn – the megaphone handle is firmly attached. - LuxOS News is listed among the LuxOS apps in the Store (
luxos-desktop1.1.0-91): the app was hidden in the Store as part of the system; it now appears in the LuxOS apps section like the other built-in apps, with a description in all LuxOS languages. It is installed with the system and by updates. - Installer: automatic installation no longer picks a USB flash drive instead of the computer's disk (
luxos-installer1.1.0-47): the default target was the first disk in kernel order, so a USB flash drive (sda) came before the internal NVMe (nvme0n1). The graphical and text installers and manual partitioning now sort disks: internal first, SSD/NVMe before spinning disks, then the largest; USB and removable disks last (ordered by size). You can still install to a USB disk, you just have to choose it. The installation medium is still never offered. - The LuxAI check of community packages said "looks suspicious" even for safe packages (
lux0.3.0-32): the Flash model now always thinks first and had no room left for the answer, so the check couldn't be confirmed. It now has enough room for both. - Terminal: text typed right after opening a window no longer also appears in the top-left corner (
luxos-shell1.1.0-21): what you type during the welcome screen is shown once, at the prompt. - Software Update: the history shows exactly what was updated (
luxos-care1.0.0-27,luxos-desktop1.1.0-90,luxos-i18n94): clicking the "LuxOS was updated" notification opened the Software Update window, but the "Updated 34 packages · just now" row in Repair and update history could not be opened – there was no way to see what had changed. Now every update and repair row expands: the packages sorted by name with old → new version (installed, removed, back to an older version), apps also with their name; a long list scrolls. Whenluxos-brandingchanged there is also a LuxOS release notes button (What's New). A repair shows the problem, what LuxOS did, its output and the reinstalled packages. LuxOS Care records the list of changes with every update and repair (from the package manager log/var/log/lux.log); for older updates it looks them up in that log (read-only) at the time of the update, and if nothing is found it says "Details aren't available for this older update." The Details button of the notification after an update (and after a repair) opens the window with the newest entry already expanded. The history also keeps its size in check and only the package count goes to the log. Teststest_luxos_care.py(recording the list, lux.log window, old entry without data) andtest_update_history_gui.py(Xvfb). - A network printer out of reach no longer shows a green "Ready" (
luxos-printing1.0.0-21,luxos-docs85): a printer added on another network (e.g. a Kyocera via IPP Everywhere) stayed "Ready" in Printers & Scanners for hours after leaving that network, even with the app open the whole time. CUPS reports a driverless queue as ready until a print job fails, and avahi keeps the printer's announcement cached for a while. Availability now comes from what is visible on the network right now: the printer's announcement (mDNS) and a short connection to its address (ipp://,ipps://andsocket://queues by the address and port in the URI), always off the app's main thread and with a short timeout. An unreachable printer shows "Not connected" (with the number of waiting documents), just like an unplugged USB printer; a reachable one stays "Ready". The status refreshes every 12 s while the window is open and right after a network change. Queues and CUPS settings are not changed. Testtest_luxos_printing_reachability.py(simulated avahi and connection check, window under Xvfb). - LuxAI: an answer that starts repeating itself is stopped (
luxai2.0.2-13): when the model keeps writing the same passage over and over (4 or more times in a row; code, tables and numbered lists don't count), LuxAI stops the answer and retries it once by itself with a higherfrequency_penalty– the looped beginning disappears from the window and the history. Only if the retry loops too is the answer trimmed to one occurrence, and the window (and the LuxOS Companion remote session) shows "The answer started repeating itself and was stopped." (12 languages). A looped answer never runs a tool and the agent does not continue with it. Requests carryfrequency_penalty0.3 (dropped if the server rejects it). Built withlsl0.10.14. - The lock screen has Sleep, Restart and Shut Down again after waking from sleep (
xfce4-screensaver4.20.2-1.8): right after waking up, the power buttons at the bottom of the lock screen were missing. Whether to show them was decided only once, when the dialog was created, which happens exactly while the computer is waking up and logind and polkit are not keeping up yet (the query timed out or did not return "yes") – the buttons then stayed missing until the next lock. Now the state is checked again without blocking the screen: when the dialog appears, when the login part slides in, after waking up (the PrepareForSleep signal) and then a few times a second apart. A button that would need an administrator password (e.g. another user is signed in) stays hidden. Testtests/gui-power-buttons.py(Xvfb, simulated logind on its own bus). - Installer: fixes from the final audit before the stable release (
luxos-installer1.1.0-46,luxos-i18n89,luxos-docs81,luxos-desktop1.1.0-86): manual mode (partitions mounted in /mnt) with a root that is not a btrfs subvolume (ext4, xfs) no longer fails after the packages are downloaded; a kept existing volume (e.g. ext4 as /data) is mounted with its real file system instead of as btrfs; reinstalling next to other systems makes the new installation the default boot entry (before, the old one stayed and could point to a deleted partition); a Ventoy or dd-written installation USB is no longer offered as the target disk; the suggested user name for “Žofie” is “zofie”, not “ofie”; system account names (e.g. systemd-network) are refused in the text installer and in config files too; one server being down no longer means “no internet”; Esc in a text installer question just cancels (“Cancelled. Nothing was changed.”) instead of reporting a failure; a disk password with a line break (impossible to type at start-up) is refused up front; after a failed installation no gpg-agent is left holding the target disk mounted; the time zone detected from the IP address is used only when it is a known time zone; the graphical installer reports a missing BIOS boot partition the same way as the installation does (one on another, unused disk is not enough); unused login screen scripts (compositor for the old greeter) removed; docs: /tmp is encrypted only with disk encryption, and the time-zone lookup (ip-api.com) is described in the privacy policy. - SFTP network backups work again (
luxos-backup1.0.0-8,luxos-i18n89): after an earlier fix, backup and restore to ansftp://user@serveraddress could not connect. Deleting an old backup renames it first, so an interrupted delete (power cut, unplugged disk) no longer leaves a half-deleted backup that looks complete; the rest is cleaned up on the next run. When other files fill the disk, Backups no longer delete every old backup but the last one each hour. The "no backup for X days" reminder is counted per disk, so a forgotten USB disk is reminded even while a NAS keeps backing up. - Lux Guard no longer reports "System files were changed" every week (
luxos-care1.0.0-26): the weekly file check took the permissions that the Lux Guard package sets for its session helper for a foreign change, on every computer with Lux Guard. A snapshot before an update that fails (full disk) is now shown as a notification and old snapshots are still cleaned up; manual "Update" works on networks where only the NetworkManager connectivity check fails; Ctrl+C in a terminal duringluxos-care updateno longer stops the installation half-way; a runninglux searchor an idle PackageKit no longer postpones updates. - Lux Guard: home snapshots and file restore (
luxos-guard1.0.0-14): when the hourly snapshot does not fit on a full disk, old snapshots are still cleaned up (they hold deleted files); restore with overwrite keeps the current version of a file even across partitions, and two files with the same name from different folders no longer overwrite each other in the backup. - Safe: a hand-edited setting no longer turns off auto-lock or blocks unlocking (
luxos-safe1.0.0-12): an empty or invalid idle time means the default 15 minutes. - lux: an interrupted installation is no longer reported as success, and more (
lux0.3.0-31,lux-engine7.1.0-3.8,luxos-sandbox1.0.0-13,luxos-i18n89): Ctrl+C or a shutdown during installation used to end with an "updated" message although only some packages were installed; lux now says to finish withlux update. Switching the channel (staging to stable) forces fresh package lists.lux updatealso updates community packages installed in the sandbox and no longer looks up LuxOS packages in the AUR. .lux apps are installed in the version just listed bylux update.lux cleanwaits for a running update and does not delete its packages. Login, sudo and disk files (PAM, sudoers, sshd_config, fstab) are no longer merged automatically during updates: your file stays and you get a notice. A community build script with a non-UTF-8 character is checked in full instead of being refused. A broken .lux package keeps the old version running. The script diff for community updates is shown against the last built version. - lsh: LSL session file only in a private folder (
lsh1.0.0-5): without its ownXDG_RUNTIME_DIR(for examplesudo -s) the session file used a predictable name in the shared/tmp; it is now always in a private folder. - Packages: file ownership and builds (
luxos-themes2025.12.27-12,luxos-desktop1.1.0-86,luxos-branding1.1.0-31,luxdrop1.0.0-11): WhiteSur theme files belong to root (previously to the first user), theluxos-desktopbuild is not stopped by a Python cache in the work tree, and the build number in os-release takes its date from SOURCE_DATE_EPOCH. Driver checks: 8 drivers (Brother, Canon MG7700) got a fixed install script and all drivers are verified again under the new rules. - LSL IDE and LuxAI: fixes from the security review (
lsl-ide1.0.0-9,luxai2.0.2-12): LSL IDE cloud files are saved only inside the local cloud folder; the account session is not sent to another server on a redirect; the IDE downloads LSL only with a verified checksum; the model menu no longer shows wrong limits and usage follows the selected model. The LuxAI agent doesn't open files through /proc, and in "risky" mode only truly read-only commands run without asking. - Calendar: repeating events in UTC and from Outlook show the right time, an unreadable calendar is never overwritten (
luxos-desktop1.1.0-88,luxos-i18n92): a weekly meeting stored in UTC (Google, Outlook) no longer moves by an hour after a daylight saving change and stays in UTC when saved. Time zones with Windows names (Outlook, Teams, e.g. "W. Europe Standard Time") are recognised through the CLDR table; before, the time was read as local time. BYYEARDAY, BYWEEKNO and hourly rules now work; before, only the first occurrence was shown. When the calendar file exists but cannot be read, Calendar refuses to save and says why. Before, it could overwrite the file with only the new event. The previous content is also kept inevents.ics.bakbefore every save. Reminders set more than two days ahead (e.g. a week) now go off. - Desktop: small fixes from the audit (
luxos-desktop1.1.0-88,luxos-i18n92): Joining Wi‑Fi from a QR code (Camera) no longer puts the password on thenmclicommand line, where other users of the computer could see it. It goes through a temporary file only you can read. Network Admin reads the network state correctly in every language (SSID). Pairing a Bluetooth keyboard shows the code in one window that updates while you type. Before, windows piled up on top of each other. The PIN from the device is shown as it is. Calculator: 0, ± and 5 gives −5, not −05. System Monitor no longer counts virtual machine time twice, which made CPU load look too low while a VM ran. Battery & Power shows both batteries on laptops that have two, and no longer shows an empty battery as "Plugged in, not charging". Feedback also removes IPv6 addresses and Wi‑Fi network names from the logs. A report is no longer dropped when your sign-in has expired; it is sent after you sign in again. A screen recording is kept even if the app crashes while recording. Before, only a hidden.partfile was left. Dragging the Sound and Brightness sliders in Control Center no longer starts dozens of processes, and the last value is the one that sticks. Two alarms in the same minute both ring. Critical safety notices (too many processes, low memory) can only be sent by the system, not by another user of the computer. A full or read-only settings folder no longer stops Keep Awake or the widgets. The menu bar loads a large wallpaper only at screen size. Text Editor is also added to an empty Dock. - LuxDrop: files sent at the same time, and the PIN (
luxdrop1.0.0-12): Files sent from LocalSend at the same time into one folder no longer fail at random. A finished file used to remove the shared folder for unfinished files while other files still needed it. A file that was saved is no longer reported as failed only because its temporary copy could not be cleaned up. One device with many IPv6 addresses can no longer use up the shared limit for wrong PINs and block PIN transfers for everyone else. Trusted devices never need the PIN. A connection that drops while sending is reported as "connection lost", not "connection failed". - Printing: network printers only after you click, Scanner keeps an open session (
luxos-printing1.0.0-20,luxos-i18n92,luxos-docs82): LuxOS no longer adds a printer announced on the network (mDNS, which anyone in a café or hotel can send) by itself or makes it the default. It offers it in a notification with Add. USB printers are still set up on their own. A second Scanner window no longer deletes the scanned pages of a window that has been open for more than a day. - Firewall: opening a port asks for the administrator password (
luxos-firewall1.0.0-4,luxos-desktop1.1.0-88,luxos-docs82): Allow in the blocked-connection notification used to open the port for the local network without a password. It now asks for the administrator password like other firewall changes, and remembers it for a few minutes. - Privacy: Firefox, Feedback and the website (
luxos-desktop1.1.0-88,luxos-docs82, website): Firefox no longer asks Mozilla for your country by IP address, and no longer checks your connection and Wi‑Fi sign-in pages through detectportal.firefox.com; LuxOS detects sign-in pages itself. Firefox no longer suggests add-ons or Pocket stories. This matches the welcome page's promise of "no technical data to Mozilla". The privacy policy now says that Maps' My Location sends the Wi‑Fi networks around you to BeaconDB (only after you agree), and that Feedback also removes IPv6 addresses and Wi‑Fi names. The usage page suggestedsudo lux-config set-countme off, which does not exist; the right command islux config countme off. ISO verification usessha256sum -c --ignore-missing SHA256SUMS. Without it, the check complained about missing files even when the download was fine. The ISO size is shown in decimal GB, like in the installer. - The Sandbox window no longer has a trusted link to your desktop (X11) (
luxos-sandbox1.0.0-12,luxos-i18n88,luxos-docs80): apps in the sandbox always saw only their own Xephyr, but Xephyr itself connected to your desktop with your full trust – had an app hijacked it (a Xephyr bug), it could have read keys typed into other windows, taken screenshots and typed into other windows, as X11 allows. Xephyr now runs in its own bwrap (no home, network or session, seccomp) and connects with an untrusted authorization from the X server's SECURITY extension, new for every run, kept in memory only (never~/.Xauthorityor its FamilyWild entry) and revoked when the sandbox exits. Verified under Xvfb (tests/test_x11_untrusted.py): XQueryKeymap, selecting another window's events, RECORD, XInput2, XGetImage of a window or the screen, XSendEvent and XTest are refused; the test fails on the old code path. Remaining: the SECURITY extension does not stopXGrabKeyboard(an active, visible keyboard takeover). For apps that are too slow without MIT-SHM, the Sandbox window has a per-app Trusted display option (with a warning, off by default;luxos-sandbox trusted-display). Flatpak apps with the x11 permission still get your trusted cookie (LuxOS does not wrap Flatpak) – documented. lux fixno longer leaves a half-updated system andlux installno longer installs onto an outdated system (lux0.3.0-30,luxos-i18n85):lux fixrefreshed the package lists but installed only the signing keys – a laterlux installthen took packages built against newer libraries than the system had (the program did not start) or upgraded a library that old programs need.lux fixnow updates the whole system after refreshing the lists (keys first, with the usual question); when the system is older than the lists (also after a declined update),lux installoffers to install together with a full system update, and refuses with a hint tolux updatewithout a terminal and in the Store. Unrelated installs and IgnorePkg packages still go through.- The installer erases only the disk that was selected, and a hand-prepared encrypted system boots (
luxos-installer1.1.0-44,luxos-i18n85): right beforewipefs/sgdisk --zap-all(whole disk, next to other systems, existing partition and manual partitioning) the size, model, serial number and WWN of the selected disk are checked again (from the graphical installer also the size and model of the chosen disk) and the write goes through the stable/dev/disk/by-idpath; if /dev/sdX now belongs to another disk (USB unplugged/plugged in), the installation stops and erases nothing. The “partitions already mounted at /mnt” mode with a manually opened LUKS/LVM under / getsrd.luks.nameand thesd-encrypt/lvm2initramfs hooks (it did not boot before). - LuxOS Care: fallback kernel after a snapshot rollback and ESP cleanup during a manual update (
luxos-care1.0.0-25): after rolling back to a snapshot the “previous kernel” entry kept the old system's kernel, whose modules the restored system may not have – it now gets the restored system's fallback kernel (kernel, modules and initramfs from it), otherwise the entry is removed. The ESP cleanup no longer deletes aninitramfs-…img.tmpthat mkinitcpio is writing during a manuallux update– only files older than an hour and not open by any process. - Installer: fixes from a visual review (
luxos-installer1.1.0-45,luxos-docs1.0.0-78,luxos-i18n1.0.0-86): sizes in decimal GB everywhere (manual partitioning no longer uses GiB), the summary shows the "will be erased" warning at the top and the window fits the screen (1280×800, 1024×768), taller device tree in manual partitioning, clearer step names ("Target Disk", "Updates & Maintenance" in all languages) and anonymous usage count wording ("on - once a week, no personal data", same in the Setup Assistant), local time in the wizard language, no "Min.." in German; the summary no longer crashes without a selected disk (demo mode). - Dates and numbers follow the language outside Mail too (
luxos-greeter1.0.0-15,luxos-desktop1.1.0-84,xfce4-screensaver4.20.2-1.7,luxos-account1.0.0-11,luxos-backup1.0.0-7,luxos-weather1.0.0-10): dates on the login and lock screens, in the top bar (and its tooltip), the Today widget, the Clock world clock, the screensaver, the Tour and the LuxAI limit reset follow the system language – no more English names among Czech text when the locale isn't generated, and no fixed Czech "st 18. lis" format in other languages; decimal comma per language (sizes in Backups and App Reset, charts, battery power and energy, CPU load, network latency and speed, Weather precipitation); the "Enter Password" hint is readable on light and orange wallpapers (the field darkens according to the wallpaper brightness). - Website and Sandbox: small fixes from a visual review (website,
luxos-sandbox1.0.0-11): the website header is no longer cut off on tablets (701–1000 px) – the menu moves behind the menu button; the Sandbox status badge (Ready / Not created) has enough contrast. - Settings windows and system apps: fixes from a design review (
luxos-desktop1.1.0-85,luxos-i18n87,luxos-branding1.1.0-30,luxos-docs79): About This Computer is a new window in the style of the other Settings windows (LSL instead of yad) – values aligned in one column, buttons without coloured icons and with room to breathe, no more cryptic “Shell lsh” row, “Linux kernel” instead of “Kernel”; it now also opens without a UTF-8 locale (LANG=C/POSIX, previously “Invalid byte sequence in conversion input”). System Monitor, Feedback, Battery & Power, Desktop & Dock, Router, Keyboard Shortcuts and What's New fit on a 1366×768 or 1280×800 screen (height from the work area without the menu bar, the content scrolls) and can no longer be shrunk to an unusable ~200 px. Screen Saver & Lock, Keyboard Layouts, Bluetooth, Fingerprint Login, Profile Picture and Displays are as tall as their content – no empty area at the bottom. What's New says where to click instead of showing terminal commands: the clock in the middle and rounded corners of the menu bar are new switches in Desktop & Dock › Menu Bar, and LuxAI explains Secure Boot on an already installed system. Feedback has Settings-style switches instead of tiny check boxes, and the Send button stays readable while disabled. Battery & Power on the power adapter with a full battery shows “Charging complete · running on the power adapter” instead of “-”, and hides the charge-cycles card when the battery does not report it. Router without a connection disables Show, Test and Measure with the hint “Not connected to a network”. Displays: the text size slider labels no longer sit off their marks (the chosen size is shown under the slider). The header buttons of Wi‑Fi QR Code and Keyboard Shortcuts sit on the right and look the same, not right next to the window buttons. The GUI test guard (scripts/luxos_testguard.py,luxos-testguard.sh) also points every test's system bus at a dead socket (a fake one only throughLUXOS_TEST_SYSTEM_BUS) and cameras at an empty folder (LUXOS_VIDEO_DEV_DIR; the test process cannot open/dev/video*) – a test can never again switch on the real webcam or scan for Bluetooth devices. lux system, Text Editor and website: small fixes (lux0.3.0-29,luxos-text1.0.0-7,luxos-i18n1.0.0-83):lux systemnow checks whole values from the file – a keyboard layout, user or host name, package, service or port with a trailing newline (e.g."us\n") no longer passes the check into files written as root. Text Editor checks the file size before loading and refuses files over 50 MB with a clear message (in all 12 languages) instead of reading the whole file into memory and freezing. The website build always reads and writes text as UTF‑8 – withLC_ALL=Cit used to fail. A new translation test makes sure every translation has the same format specifiers (%s,%d,%.1f,%(name)s,{name}) in the same order as the English text.- Control Center and Data Saver in Czech and other languages: Wi‑Fi, sound and connection state read correctly (
luxos-desktop1.1.0-82):nmcliandpactloutput was read in the system language – in Czech, Wi‑Fi "enabled" looked like off (the toggle could only turn it on), mute state was unknown, and Data Saver and the sign-in page check found no connection. Program output is now always read untranslated. - Desktop: fixes from an external review (
luxos-desktop1.1.0-82): the sharp window icon no longer leaves a freed X error handler in the app (GTK app crash); an empty menu bar opacity means the default 62 % instead of a fully transparent bar; the frozen-desktop watch reports a missing window manager;luxos-app-resetaccepts only a whole word as yes, restores only backups whose items point to settings folders, and puts the settings back when the backup cannot be finished (full disk); Enter on Cancel in Profile Picture does not save the crop; cancelling fingerprint enrollment while the password prompt waits no longer leaves the reader claimed; an AccountsService error is shown as text, not "True"; the app name in the menu bar is matched literally (not as a regular expression); the keyboard settings refuse a layout, variant, option or model with a line break; removing the menu bar plugin no longer makes the panel touch a freed widget; Calendar deletes only the edited occurrence of a recurring event; a lone CR in an event description no longer breaks the .ics file and aposix/…zone is written as the normal name; a screenshot of a window partly off screen has the cursor in the right place and a recording killed after 15 s is not saved as a broken video; withoutXDG_RUNTIME_DIRthe sound and network sign-in state is kept in a private 700 folder;notify-sendgets its text after--. - Automatic appearance and time change notices use the right place (
luxos-desktop1.1.0-82): the location for sunrise and sunset is found also for zones missing fromzone1970.tab(Europe/Bratislava, old names such as Asia/Calcutta) – Prague was used before. The time change notice in Dublin and Casablanca no longer calls the spring change "winter time". - Weather and Maps (
luxos-weather1.0.0-9,luxos-maps1.0.0-11): after removing a city the selection and loading move with the list (the shifted city stayed "Loading…"); an interrupted transfer is reported as a network error instead of loading forever; a missing forecast value skips only that hour or day;LANG=Csearches in English; 995 m shows as 1 km; GeoClue is asked for EXACT accuracy; nearby search by a name with a dot or asterisk matches literally; editing From/To during a route no longer breaks map drawing and rerouting during navigation keeps its destination; ageo:link withz=NaNno longer stops map drawing; a route time later on (after a summer/winter time change) uses the offset valid for that day. - Small fixes (
luxos-shell1.1.0-20,luxos-text1.0.0-6,luxos-pixbuf-svg2.63.3-2,luxos-guard1.0.0-13,luxos-safe1.0.0-11):deluser/adduseraccept only a whole word as yes ("stop" or "abort" no longer mean yes); Text Editor recognizes the language of#!/usr/bin/env VAR=1 python3and no longer touches freed memory when a window closes; loading an empty SVG no longer leaks; Lux Guard and Safe notifications pass their text after--. - Backups: restoring no longer reports success when some files are missing, and an interrupted backup no longer carries deleted files (
luxos-backup1.0.0-6,luxos-i18n84): restoring the whole home folder or single folders now says “Some files could not be restored” when rsync or the built-in copy cannot read some files (previously “Done”, with unreadable files and whole folders silently missing). Restoring without rsync no longer writes through a symbolic link outside the target, restoring the whole home folder over SFTP no longer crashes, and an interrupted backup without rsync is rebuilt – it used to keep files that had been deleted or excluded in the meantime. SFTP backups finish an interrupted backup and delete older unfinished ones after an interruption – they used to stay on the server, fill it and make real older backups get deleted. A disk saved as a fixed path (e.g./mnt/zalohy) is recognised as not connected after it is unmounted – previously the home folder was copied onto the system disk and filled it. Deleting a backup accepts only a real backup name. - Calendar: recurring events per RFC 5545 (
luxos-desktop1.1.0-83,luxos-companion1.0.0-9,luxos-i18n84): deleting a single moved occurrence no longer deletes the whole series; concurrent saves (Calendar and the phone via LuxOS Companion) no longer overwrite each other's changes or bring back a deleted event – editing an event deleted elsewhere shows “This event was changed or deleted elsewhere.” An event in another time zone keeps the right time after a daylight saving change (the recurrence is expanded in its own zone). Extra dates (RDATE) are now shown, “every weekday” no longer produces weekends (daily rule with BYDAY), “last working day of the month” gives the right dates (BYSETPOS), an excluded date (EXDATE) also applies to a non-recurring event, a cancelled event (STATUS:CANCELLED) is hidden, and month-day plus weekday rules are combined as an intersection. A yearly rule with a month day or weekday but no month applies to the whole year (previously one month only), an event withoutEND:VEVENTno longer swallows the following events, a time zone from aposix/orright/link is written correctly and a lone\rin text is saved correctly. - Calculator: functions, percent and sign change after a parenthesis, consistent percent, no huge pasted number and small trigonometric results (
luxos-desktop1.1.0-83): functions, % and ± after a closing parenthesis apply to the whole parenthesis; 300 + 10% and (300) + 10% both give 330; pasting 1e999999999 shows Error instead of allocating huge amounts of memory; sin, cos and tan give an exact zero only for exact angles (180°, π) and very small results are shown in scientific notation instead of 0. - Scanner: feeder error after page 1, cancelled pending scan, page 1000 and two identical scanners (
luxos-printing1.0.0-19): a jammed feeder after finished pages is no longer reported as success (finished pages are kept and the error is shown), cancelling a scan that waits for another search really cancels it, page 1000 and later no longer overwrite earlier pages, and two scanners of the same model appear as two entries (told apart by serial number). - Displays: a long monitor name no longer overflows into the neighbouring preview (
luxos-desktop1.1.0-83): the name is shortened with an ellipsis. - Clock: ringing stops even when the app crashes; notifications with text starting with a dash (
luxos-desktop1.1.0-83): the alarm sound loop ends with the app (after a crash it used to ring until logout). Memory, runaway program, network, Calendar reminder and alarm notifications pass their text after--, so a name starting with “-” is not taken as a notify-send option. - LuxDrop: safer receiving (
luxdrop1.0.0-10): receiving two same-name files at once no longer overwrites a file even on disks without hard links (FAT/exFAT), a failed temporary-file deletion no longer creates more copies, long names with a collision number stay within 255 bytes and names differing only in Unicode normalization are no longer duplicated. The LocalSend HTTP parser can no longer be bypassed by splitting a line over several packets and rejects invalid chunk lengths. Unauthenticated devices on the network can no longer exhaust the receiver: at most 4 connections per address, and authentication must finish within 30 s in total (trickling bytes no longer extends it). The executable bit is kept only for files from trusted devices. The lists of devices with folder access and of shared folders are no longer overwritten by concurrent writes. - LuxOS Care: the update timeout also works for a silent program (
luxos-care1.0.0-24): a process that prints nothing, or a child process holding the output open, no longer blocks the update – after the limit the whole process group is stopped. - LSL IDE: the LuxAI agent stays inside the project and never freezes the IDE (
lsl-ide1.0.0-7): the agent no longer gets the whole home folder (the IDE's default "project"). Without an open project it works only with the open files. It never reads keys, passwords, tokens, the LuxAI account or browser profiles, not even inside a project or through a symlink. The approval dialog shows the full command line and all arguments. A program that doesn't read its input no longer blocks the IDE. Long conversations no longer fail with a server error (HTTP 400) because history trimming keeps the task. Stop, Cancel and switching conversations while the agent works no longer break the conversation. - LuxAI: file search and reading never return the account sign-in or keys (
luxai2.0.2-11): file tools check the real path (also through symlinks), and text search skips files the agent may not read without asking. - Security: hardening of security services and session components from an external review (
luxos-guard1.0.0-12,luxos-greeter1.0.0-14,luxos-companion1.0.0-8,luxos-account1.0.0-10,luxos-firewall1.0.0-3,luxos-care1.0.0-23,luxos-terminal1.3.0-7,luxos-safe1.0.0-10,luxos-desktop1.1.0-81,luxos-mail1.0.0-13): Lux Guard – an invalid or unusual message from a user program no longer stops the service (repeated crashes could switch Guard off), the service never waits for a client that does not read its replies, and connections, passed files and unsent replies are limited; the check for passwords fed tosudoruns in linear time (one long line could delay analysis by tens of seconds); USB drives with a tab, newline or backslash in their name are watched correctly; restoring from a snapshot with overwrite moves the current versions to~/.local/share/luxos-guard/before-restore/<time>(changes since the snapshot are not lost). The login screen always writes the transition frame to a new file (never through a symbolic link). LuxOS Companion drops unsent messages of a crashed LuxAI process. LuxAI account – the account cookie is not sent to a redirect target,LUXAI_ORIGINover http only to this computer, an invalid server reply is a message instead of a crash, a foreign callback link no longer cancels a sign-in in progress and a new browser sign-in ends the previous one at once. The firewall keeps a damagedfirewall.jsonasfirewall.json.damagedbefore overwriting it. LuxOS Care does not remove the package database lock whilelux, pamac or PackageKit runs. The terminal uses a new logo right after an update. The Safe unlocks even with hand-edited settings. Screenshot, Emoji, Clock and Mail connect only to a service of the same user. - Installing alongside Windows never damages Windows or other disks (
luxos-installer1.1.0-43,luxos-i18n82): manual partitioning refuses to shrink an NTFS partition (clearly, before the summary) when Windows is not fully shut down (hibernation or Fast Startup) or has a disk check scheduled – Windows would damage NTFS when resuming.ntfsresizenever runs with--forceany more. The shrink is tried as a dry run before the summary and done first, before any other disk is erased. Deleting or resizing partitions on an MBR disk is refused (sgdisk would silently convert it to GPT and Windows/BIOS on that disk would stop booting). The installer now needsntfsprogs(Arch splitntfsresizeout ofntfs-3g; it was missing on the ISO). - Installer: the summary lists formatting of an unlocked encrypted volume (
luxos-installer1.1.0-43): formatting the contents of an existing unlocked LUKS volume (or a new LVM group in it) was missing from "Will be erased or changed"; for existing volumes "Format" is pre-selected only for/, otherwise "keep data". - Installer: the whole disk from a config file is checked (
luxos-installer1.1.0-43):DISKfor erasing a disk or installing alongside other systems must be a whole disk, not the installation medium, and (when erasing) nothing on it may be mounted – checked before the summary and again right before erasing. - Installer: account password and name are checked before the disk is changed (
luxos-installer1.1.0-43): a password with a line break is refused, a colon or line break in the full name becomes a space (the install used to fail only after the disk was overwritten). - Preparing for another person (OEM) with encryption into an existing partition (
luxos-installer1.1.0-43): the temporary disk key was not written to the system, so the disk was encrypted with a password nobody knew. Now it works like whole-disk encryption – the Setup Assistant replaces it with the owner's password. - Installer: manual partitioning on BIOS with an existing BIOS boot partition (
luxos-installer1.1.0-43): a new partition on a disk that already has a BIOS boot partition is no longer refused; an erased disksdais no longer confused withsdaa, nornvme0n1withnvme0n10. - Boot: a long disk check is not a "failed start" (
luxos-tweaks18): once the system disk appears, the start watch ends – systemd watches the disk check and mounting. The boot failure log on the EFI partition is at most 1 MiB and an incomplete one is deleted (a small ESP shared with Windows does not fill up). - Printers are not marked as removed while CUPS is unavailable (
luxos-printing1.0.0-18): when cupsd was not running, sync treated all printers as removed by the user and never added them again. - Logging in stops only the login screen's compositor (
luxos-desktop1.1.0-81): it used to stopxcompmgrof all users. - ISO: removed the broken "speakup screen reader" boot menu entry (
espeakupis not on the ISO). - Security: verified AUR drivers, community packages and updates through
lux(lux0.3.0-28,lsh1.0.0-4,luxos-docs77;[luxos-drivers]build,drivers/luxdrv.py, patches for 7 Brother drivers; findings of an external code review): the check of driver install scripts (.install) now also covers code outside functions and permissions set at install time (setuid, including unusual spellings); forbidden commands are recognised even with another path or in quotes; source file names and allowed library paths are checked more strictly. Drivers are built as a user that cannot gain root (sudo disabled) and cannot read the signing key; driver scripts are not run in the build container. 7 Brother drivers (DCP-J1050DW, MFC-J1205W, J3540DW, J3940DW, J4335DW, J4440DW, J5340DW) got a small LuxOS patch and are verified again. Community package check (LuxAI Lite): a script too large to check completely is never installed into the system.lux updatealways confirms new versions of community packages in the system (also with-y) and offers their changes since the last version..luxpackages: updates in the staging channel use the staging index, an older index than the cached one is refused, installation is atomic (the old version comes back if the swap fails), dependency cycles end and commands outside the package are refused.lux system: kernel parameters no longer change the backup boot entries (previous kernel, fallback initramfs), a file with password hashes is readable only by root, a generated file that fails its own check is not kept, every error duringapplysays what already changed and how to go back, andremove_unlistednever removes login, desktop, network or boot loader.lux doctorno longer says "OK" together with the first problem it finds.lux checkfrom the Store no longer blocks cleaning up a stale database lock. In lsh,pipas root no longer overwrites system Python packages. - Publishing and building (repository scripts, not packages): publishing verifies the LuxOS signature of every package and database in all repositories (one
.sigfile used to be enough); publishing the website never deletes manually uploaded files indownload/; composing the stable release refusesout/itself or a path outside it; the Secure Boot check refuses a kernel without EFI files and the ISO uses shim only with a systemd-boot really signed with the LuxOS key; signature checks no longer fail at random;.luxpackages without icons no longer stop the build;scripts/test-vm.sh --headlessboots the ISO (it used to boot the disk without options),scripts/vmctl.py keysrefuses characters it cannot type before typing, and the GUI test guard stops its own D-Bus bus. - Backups: adding a network disk (SMB) again no longer erases the old backups (
luxos-backup1.0.0-5,luxos-i18n82): after "Stop Using" (the window promises that the backups on the disk are kept) and adding the same shared folder again, the backup image of this computer was always formatted again and all backups were gone – without any question. An existing image is now used as it is (an encrypted one after entering its password); it can only be erased after an explicit "Erase and Use". The same shared folder added twice is refused before anything is touched, and the server password does not stay in the keyring after a failed add. - Backups: the hourly backup no longer unmounts a disk the Backups window is using (
luxos-backup1.0.0-5): the window (browsing, restoring) and the timer backup are separate processes, and whoever mounted the disk unmounted it at the end – even while the other one still used it. LuxOS Backups processes now record who uses a disk; only the last one unmounts it (locks it, releases the image). When mounting fails, an already unlocked disk is locked again. - Security: Backups – sftp server address and disk preparation (
luxos-backup1.0.0-5): the server and user name of ansftp://address are checked and ssh gets the destination only after--, so an address cannot inject an ssh option. Preparing (erasing) a disk refuses the disk and partition the running system is on even under LUKS or LVM (previously only the mounted device itself was checked, not the disk below it – e.g. LuxOS installed on a USB SSD). - Security: the sandbox network (
--net) has no way into the local network (luxos-sandbox1.0.0-10): only the default route stays in the namespace and the networks directly attached to the computer are blocked too, including the public IPv6 prefix of the home network from router advertisements (it was in no blocked range before); without an IPv4 default route the local IPv4 network also stayed reachable. If any step of the network setup fails, the sandbox does not start. The isolation test also checks an IPv6 address in the local network. - LuxOS Care: a start without a login manager is marked as good (
luxos-care1.0.0-23): the post-boot check waited fordisplay-manager.serviceeven where there is none (a server, a disabled or differently started login manager) – a missing unit reports the state "inactive", which the check took as "should run". The start was then not marked as good and after a few starts the boot loader switched to the fallback kernel. It now checks whether the unit exists and is enabled. - LuxOS Care: a snapshot with an unreadable description keeps its kernel (
luxos-care1.0.0-23): cleaning up kernel sets on the EFI partition treated a snapshot with a damaged or missing description (.json) as a snapshot without a kernel and deleted the kernel and initramfs the snapshot uses. When a description cannot be read the sets are now kept; they are removed only when the partition runs out of space, and before the sets of snapshots with a valid description. - LuxOS Recovery: reinstall lists custom system services (
luxos-care1.0.0-23): custom systemd units, their drop-ins (*.service.d/*.conf) and masked services in/etc/systemd/systemare not carried over to the new system and were missing from the list of settings the reinstall resets. They are listed now (and stay in the snapshot taken before the reinstall). - LuxOS Store: an install no longer hangs on unexpected output and cut-off images are not cached (
luxos-store1.0.0-21): invalid UTF-8 in the install output (e.g. from a package script) stopped the thread reading it – the install then waited on a full pipe while holding the package database lock and the Store showed the progress forever. The output is now always read to the end. Screenshots and icons cut off during download (time limit, dropped connection) were cached forever; only complete downloads are cached now. - LuxDrop: more reliable trusted-device list and LocalSend receiving (
luxdrop1.0.0-9): simultaneous writes (receiver, window, service) could overwrite changes or corrupt the trusted-device list or the history – writes are now locked. One device can no longer take all LocalSend receive connections, the PIN has a shared limit across all addresses in addition to the per-address one, and a broken reply from the receiver no longer crashes sending (the transfer ends as failed). - Server: rolling back the mail sign-in deployment also restores the Dovecot setting, and the install statistics keep their history when one entry is invalid (
server/mail-oauth,server/countme):remote-rollback.shdid not restore theauth-passwdfile.conf.extchange; countme moves the original file aside unchanged and keeps the valid entries. - Lock screen: the charging bolt is visible at every charge level and on every wallpaper (
xfce4-screensaver4.20.2-1.6,luxos-greeter1.0.0-13; complaint "on the lock screen the battery icon is white while charging and the bolt is white too, so you can't see it"): over the empty part of the battery the bolt was white with nothing behind it – on a light wallpaper (and at lower charge, when it lies entirely over the empty part) it blended into the wallpaper and the white battery. Now, like on macOS, it is dark with a white edge over the fill and white with a dark edge over the empty part, the inside of the battery has a dark backing and the outline a soft shadow – battery and bolt are visible on dark, light and white wallpapers, at 0–100 %, when full and when "plugged in, not charging", at 1× and 2× scale. The icon is slightly larger (at 1280×800 the bolt was only 3×6 px). The same on the luxos-greeter login screen. Also, a battery without a readable capacity is no longer shown as "-1 %" or 0 %. Tests: icon rendering at every charge level, wallpaper and scale (xfce4-screensaver/tests/test-lock-battery.c,luxos-greeter/tests/gui-battery.py) and the real lock screen under Xvfb (xfce4-screensaver/tests/gui-battery.py). - Help: Displays on its own page (
luxos-docs75): the Settings page outgrew the size limit, the Displays app now has its own page. - Widgets: the Now Playing card no longer jumps around or disappears, and its button does what it shows (
luxos-desktop1.1.0-80; complaint "when I play music from the widget it stops after a while anyway, the widget jumps around and disappears" – Firefox and switching workspaces): on every new page or new video (page reload, next YouTube video) Firefox drops its MPRIS player and registers it again right away – the Now Playing card vanished for a moment and came back, and because a hidden card did not keep its slot in the default layout, all cards below it jumped up and back. The card now waits 8 s after the player leaves (shown as paused), keeps its slot in the default layout even when hidden, and the other cards never move when it appears or disappears. A card moved by someone else (the window manager when it is shown again, a window manager restart) is put back within 5 s exactly where the user placed it. The Play/Pause button sends Play or Pause according to its icon instead of the toggling PlayPause – clicking "Play" can never stop the music, even if the card showed a stale state. Checked with real Firefox under Xvfb (private profile, audio into a private PipeWire null sink): controlling from the widget and switching workspaces for three minutes without a stop, the widget sends exactly one call per click, nothing in LuxOS pauses or freezes playback; pausing after a long time without using the page is done by some websites themselves (YouTube "Continue watching?"). - The scx_lavd CPU scheduler calmly stays on the kernel scheduler after crashes, and Lux Guard no longer loses an event (
luxos-tweaks1.0.0-17,luxos-guard1.0.0-11,luxos-docs76): a real case from the owner's computer – scx_lavd 1.1.4 stopped with “scx_alloc failed” (duringfork()it got no page of BPF arena memory for the new thread; scx_lavd treats that as fatal) and in the same millisecond Lux Guard logged “event error: can't start new thread” – the thread that failed to start was Guard's own. After a scheduler crash the kernel switches to EEVDF at once (no stall); systemd now starts scx_lavd again after 10 s, then with growing delays (up to 10 min), and after 3 crashes within 24 h the kernel scheduler stays – the journal has a calm “nothing to do” note, the service does not fail, and a new attempt comes after 24 h, after an update ofscx-schedsor aftersudo luxos-care scheduler lavd. When the service stops, scx_lavd always gets SIGINT (clean switch back). Lux Guard used to start a new thread for every file written under a temporary download name (*.part,*.tmp) – a burst of such writes created hundreds of threads; now it is one bounded queue in one thread (a full queue counts as an overflow). The per-session process limit now has a floor by RAM (luxos-tasks-generator: session at least min(4096, RAM in MB / 2), user at least session + 1024) – 4–8 GB computers fit a browser, Steam and an IDE, 16 GB and more unchanged, the fork-bomb safeguard stays. Tests:luxos-tweaks/tests/test-scheduler.sh(crashes, fallback, signals, unit),test-tasks.sh(also with real systemd in a container),luxos-guard/tests/test_service.py. - The firewall opens app ports only while the app runs (
luxos-firewall1.0.0-2,luxos-docs76): the ports of LuxDrop, Steam, KDE Connect and Syncthing were open to the whole local network as soon as the app was installed – including 47924 (LuxDrop folder sharing) with sharing off and Steam ports nobody listened on. Now only a port the app is listening on right now is open (setsapp_tcp/app_udp, changed every 2 s byluxos-firewall-watchwithout reloading the whole table; a connection attempt to such a port opens it at once) – Steam Remote Play and LAN game transfer work as soon as Steam runs, with no setup.luxos-firewall status --jsonshows"when": "running"and the ports open now for app rules, new commandluxos-firewall apps. Tests also with real nft in a network namespace. - The LuxOS Care check also runs on battery (
luxos-tweaks1.0.0-17,luxos-docs76): Battery Saver stoppedluxos-care-check.timer, so on battery there was no check for security problems, no update check and no weekly file verification. It now pauses onlyman-db.timer; the check itself runs at low priority and postpones the heavy file verification until the charger is connected. A timer stopped by an older version is started again the next time the saver turns on. Testluxos-tweaks/tests/test-powersaver.sh. - Lux Guard: fewer false alarms in development folders, stale DKMS records and tests (
luxos-guard1.0.0-11,luxos-care1.0.0-22,luxos-docs76): Guard treated every script written by a process that had any watched file open as a “copy” – git (clone, worktree) reads many files at once, so git hooks and scripts of the owner's repository were risky and the package helperrealmd-arch-helper.sh.aurcritical (its content changes PAM, that is correct – it just should not have been watched). Now only a real copy counts (same size; same content still by fingerprint) and.git/hooks/*.sampletemplates are not watched (git does not run them). Detection of dangerous content is unchanged – a new sample collectiontests/guard_corpus.pychecks that 19 dangerous patterns stay critical and that ordinary scripts, PKGBUILDs and git hooks do not. LuxOS Care also deletes the DKMS records of an older fallback kernel when it removes it – before, the71-dkms-removehook randepmodfor a kernel that no longer existed at the next NVIDIA driver update. Tests: theserver/mail-oauthdeployment tests no longer needdoveadm(stub) and the “bad anchor” test really reaches the firewall check;luxos-i18ntests in a clean container withoutpython-cryptography/python-gobjectskip the tool with a reason;luxos_testguardworks withTMPDIRinside the home folder. - Security: the Canon UFR II driver no longer installs a root program or world-writable folders; permission check for all drivers in [luxos-drivers] (
cnrdrvcups-lb1:6.40.1.05-2.2 in [luxos-drivers],drivers/luxdrv.py,scripts/container-build.sh): the Canon driver installed the helpercnpkmoduleufr2rsetuid root and the folders/etc/cngplp2/accountandoptionswritable for everyone. CUPS runs the driver filters as its own user and rendering does not need root – the program is no longer setuid,account(job accounting) is readable only by CUPS (0750 root:cups),optionsbelongs to root (0755). Verified by printing through the driver to a file in CUPS in a container (UFR II LT and LIPSLX, the filter runs as user cups). The update also fixes older installations (folder permissions, links and files created there in the meantime) and setuid does not come back. Job accounting set incngplp2as a normal user is therefore not saved; an administrator sets it as root. Building [luxos-drivers] now removes setuid/setgid and write access for others from every driver (the cups group may write where filters store job settings, e.g. older Brother drivers) and checks the finished package including its install script: anything left without an exception with a reason indrivers/perms-allow.jsonis not published. A check of the whole repository found 53 packages: setuid incnrdrvcups-lbandcnrdrvcups-sfp(status programpksmncapr), world-writable folders and files in Canon (/etc/cngplp2,/usr/lib/bjlib/*.iniin PIXMA, MAXIFY, cnijfilter and scangearmp) and Brother drivers (inf/br*rcandinffolders) – the next build fixes all of them. - Security: network printers and printer management (
luxos-printing1.0.0-17,luxos-docs74): automatic setup of network printers treats announcements from the local network (mDNS) as unauthenticated – it adds only IPP Everywhere/AirPrint printers with a valid name, service type and thelocaldomain, the printer identifier (UUID) only in a valid format (otherwise it never gets into the queue address), the description without control characters, and by itself at most 5 printers per hour and 20 in total (more can be added with + in Printers & Scanners). The network watcher runs a check at most every 10 s – before, a flood of announcements postponed it forever. Drivers are never installed because of a network announcement (only for USB printers). Removing a printer and cancelling another user's print job now ask for an administrator password (polkitorg.luxos.printing.admin, remembered for a few minutes); adding a printer, the default printer, resuming a queue and cancelling your own jobs stay password-free. Tests: announcement validation, limits, announcement flood, helper permissions and polkit rules. - LuxOS Store: the app list is on screen right after opening (
luxos-store1.0.0-20,luxos-docs74; complaint "the app list takes quite long to load"): before showing anything the Store used to read the repository databases, installed packages, AppStream and the.luxindex one after another, and with an older catalog it also waited for the download – 2.7 s on the development PC, 9.4 s with an older catalog on a slow network, 13.4 s offline, 7.5 s on the first start, all behind a spinner. Now it shows the list from its last run at once (~/.cache/luxos-store/store-snapshot.json, per language and catalog channel) and loads everything else in the background at the same time: the first app card is drawn after 0.25 s in every case (offline and on a slow network too) and the full load takes 1.6 s instead of 2.7 s. The open page then only fills in (button states, icons, new apps) without jumping to the top or back to Discover; an app page opened from the quick list fills in its description and screenshots. Nothing waits for the network: the catalog is refreshed in the background with a conditional request (ETag – an unchanged catalog is not downloaded again) and a changed one updates the list immediately, missing icons are downloaded together in parallel, the.luxindex is added when it arrives. On the very first start placeholder cards instead of a spinner, LuxOS apps as soon as the databases are read (1.1 s instead of 7.5 s) and Arch apps after AppStream. Long lists (categories with hundreds of apps) show the first screen at once and add the rest in batches, icons are decoded in the background at display size and kept in memory; the Store code is a precompiled module and the sharp window icon is set after the first frame. Also fixed: card buttons in lists did not update after an install (the page's card list was cleared right after the cards were built – a card stayed on "Get" with no progress), downloaded icons redrew the whole page (jump to the top, an open app page went blank), a search given at start (luxos-store text) was replaced by Discover once loading finished, and the Installed page blocked the window while runninglux-engineandflatpak. Tests:test_store_startup.pyunder xvfb with a 600-app catalog and deliberately slow loading (first card from the saved list within 1 s – measured 0.15 s, first start with placeholders, offline with an old catalog, background refresh with ETag and 304, slow.luxindex, a 600-app category in batches, search at start, app page from the saved list) and installing from a card intest_store_gui.py. - Programs keep starting after the computer is renamed: a real case – the computer name changed during the session (jupiter → luxos), LightDM had written the screen access in
~/.Xauthorityonly for the old name, so every newly started program ended with "Authorization required … Failed to open display" – Launchpad, Clock and screenshots stopped working until an entry was added by hand. The same would happen to anyone renaming the computer in Settings, withhostnamectlorlux system, or joining a domain with a full name. At sign-in (/etc/X11/xinit/xinitrc.d, before the first program of the session) LuxOS now adds an entry valid for any computer name with the cookie the X server really accepts; the entry for the computer name stays, old entries of the same display with an invalid cookie are removed. Running sessions get it right after the update, even those that have already changed the name. The cookie is never printed or passed in arguments; on a network disk (shared home) nothing changes. The login screen, the screen lock and administrator password prompts are unchanged. Tested with a real cookie (Xvfb-auth) and a name change in a private namespace (unshare -U -u). - Old developer copies of LuxOS programs no longer override the system ones: a real case – copies of
luxos-clock-app,luxos-widgets,luxos-tour,luxos-app-studioandluxos-icon-studiofrom earlier experiments were left in~/.local/binand~/.local/share/applications;~/.local/bincomes before/usr/binin PATH, so the old versions ran (the session even started the oldluxos-widgets). At sign-in,lux*files that hide a file from a package and are older than it are now moved to~/.local/share/luxos/shadowed/<date>/, and one calm notification says which and where (in all 12 languages). Nothing is deleted; newer copies (a developer is working on them), hidden menu entries and files no package installs stay. To turn it off: the file~/.config/luxos/keep-local-overridesorKEEP_LOCAL_OVERRIDES=1in~/.config/luxos/appearance.conf. Session components and LuxOS autostart entries (session, Dock, Lux Guard, Secure Boot, sandboxed app launchers) start with the full/usr/binpath, so a copy in PATH cannot hide them. - The bar and widgets use the wallpaper that is really on the desktop (
luxos-desktop79): without a saved choice xfdesktop shows the wallpaper of workspace 0 on all workspaces ("Apply to all workspaces" is on by default), but the bar painted the wallpaper stored for the active workspace – after setting a wallpaper in the advanced desktop settings it showed an old wallpaper on the other workspaces that was not on the desktop. Widgets always took workspace 0 of the alphabetically last monitor – with a different wallpaper per workspace or an old entry of a previously connected monitor the cards got their glass and text colour from a wallpaper that was not visible. Now the bar and the widgets choose like xfdesktop: primary monitor, active workspace, the all-workspaces choice; widgets also recolour when you switch workspaces (materials are kept, nothing is loaded again). - Security: hardening from our own audit (
luxos-guard1.0.0-10,luxos-desktop79,luxdrop8,luxos-mail1.0.0-12,luxos-installer42,luxos-i18n81,luxos-docs74, ISO): Lux Guard – only the real Lux Guard session helper may answer "Run Anyway" questions, another program cannot take its place;luxos-guard allowrun by a user is confirmed in the Lux Guard window (administrators withsudostill allow directly); after an update the helper switches to the new version by itself, without signing out. Fingerprint – fingerprint sign-in (login screen, lock screen, sudo, polkit) now respects the temporary lockout after many failed attempts,/etc/nologin, the login shell and account validity just like a password; the rule 20 failures in 30 s → 1 minute stays. LuxDrop – LocalSend devices are clearly marked as not verified and show a device code to compare, their files are always saved only after you confirm, and LuxDrop warns loudly when a device with a known name shows a different key. Mail – a mailbox name containing a line break is refused. OEM – the setup assistant'ssudorule is always removed when setup finishes, even if a power cut interrupts the finishing step. Live ISO – the root password is locked (administration viasudoof the live user, the emergency shell still works), the SSH server is off and, even if started by hand, refuses empty passwords and root logins. System protection is on for new installations from the first start; the documentation explains how to turn it on for an older installation. - Organization network: joining a domain, offline days, sign-in denied by Group Policy, clashing account names, password change and shared folders without a password (
luxos-domain1.0.0-4): joining a real domain failed at the administrators step – sudo 1.9.17 rejected the rule%"domain admins"as an "empty group" (now"%domain admins", tested with the realvisudo);lux domain set offline-days 1(and the same in Settings) failed with the default 7 days of administrator rights and changed nothing – a shorter offline sign-in now also shortens the administrator rights; a domain account with the same name as a local one (jan) was shown asjan, the local account's name – nowjan@company.localwith its own home folder, and an override written by an earlier version is repaired by itself at the next connection check; changing an expired domain password at sign-in always ended with "Permission denied" (a PAM jump past the end of thepasswordstack, also repaired on computers already in a domain); organization shared folders asked for a password even after signing in – Samba (smbclient,gvfs-smb) has its own Kerberos that cannot read a ticket stored in KCM, the sign-in ticket is now kept in the file/tmp/krb5cc_UID(computers already in a domain are converted by the package update). Verified in the Samba AD lab (QEMU): offline sign-in after the days run out is refused, the "Deny log on locally" Group Policy is enforced, an expired password can be changed and a shared folder opens with Kerberos without a password.
1.0.2 "Sirius" – 2026-11-17 (beta)
Release 1.0.2 "Sirius" with a new ISO: LuxOS starts with Secure Boot on, a new top bar with widgets and the Clock app, workspace sliding and momentum scrolling like on macOS, Firefox with the LuxOS welcome page, a fixed LuxOS Recovery, faster start and less memory, installation on computers with 4 GB of RAM and over a hundred more fixes. Installed systems get everything with lux update; Secure Boot stays off on them until you turn it on (sudo luxos-secureboot enroll). Mail and the developer tools (App Studio, Icon Studio, LuxOS SDK) stay in the staging test channel for now (Mail's changes are under Coming soon), and Lux Code stays at its previous version in the stable channel.
New
- Firefox without ads: uBlock Origin built into LuxOS (
luxos-desktop78,luxos-docs71): the ad and tracker blocker uBlock Origin (packagefirefox-ublock-origin, installed withluxos-desktop– also on older installations withlux update) is on in every Firefox profile, new and existing, without any prompt. It works from the first start, even offline, with its built-in filter lists, updates the lists itself later, and the add-on itself is updated with the system. Its icon is in the toolbar (switch it off for one site with one click); you can turn it off inabout:addonsand it stays off. The welcome page shows an "Ads and trackers blocked" badge only when it really is on. - A new Firefox welcome page worthy of a premium system – and its tiles open LuxOS apps (
luxos-desktop77): the local welcome page of a new Firefox profile has a new look in the colours of the LuxOS wallpapers – a glowing logo, a large headline, a soft aurora and horizon in the background, glass cards with depth and our own icons; a gentle staggered entrance (none when the system asks for reduced motion), beautiful in light and dark mode, from a narrow 360 px window to 4K without horizontal scrolling, with a visible keyboard focus ring. The main action stands out: import bookmarks and passwords from Chrome or Edge with one button; below it three privacy badges and the tiles Help, LuxAI, Store, Keyboard shortcuts and Report a problem. Shorter, warmer texts in all 13 languages. Store, LuxAI, Keyboard shortcuts and Report a problem now open the app itself with one click (LuxOS Store, LuxAI, Keyboard Shortcuts, Feedback), even offline – before they only led to web pages; if the app is not installed, its help page on the web opens (a middle click opens the web page as before). Fixed: the Czech page linked to a non-existent Czech Store help page (404) – it now opens the English one; the Back button or a restored session on the welcome page opened the import wizard again – actions now run only once, from a fresh click. The page stays fully local (no remote fonts, scripts or tracking, 52 kB). - Firefox at home in LuxOS: coloured window buttons and a LuxOS welcome page (
luxos-desktop74,luxos-docs67): the grey × – □ buttons in Firefox's tab strip are now the red, yellow and green circles of the other LuxOS windows – same colours, size, spacing, side and order as the xfwm4 window frames, grey in an inactive window, ×, − and arrows under the mouse; in light and dark mode, private windows, with the menu bar, vertical tabs and at 2x scaling. Firefox loads the style through/usr/lib/firefox/luxos.cfgonly into browser windows, your ownuserChrome.csskeeps working; turn it off withluxos.titlebar.trafficlights = falseinabout:config. If a new Firefox version renames its buttons, Firefox's own buttons stay (a test watches for it). A new Firefox profile (also in the live ISO) opens a local LuxOS welcome page once, in the system language (all 13 languages, light and dark), instead of Mozilla's privacy notice: import bookmarks and passwords from Chrome or Edge with one button, what LuxOS set up for privacy and links to the help, Store, LuxAI, keyboard shortcuts and problem reports. It does not open again on later starts or after Firefox updates and does not change your home page. By default Firefox now sends no telemetry or technical data to Mozilla, runs no studies and shows no sponsored shortcuts or stories on the new tab. - Scrolling like on macOS: touchpad inertia and a smooth mouse wheel (
luxos-desktop70,luxos-terminal1.3.0-6,luxos-i18n74,luxos-docs61): after a quick swipe on the touchpad the content keeps moving and slows down smoothly; the mouse wheel glides to the new position in 200 ms instead of jumping (more notches during the glide add up, the distance is the same as before). It works in GTK 3 apps (Files, Text Editor, Settings, Store, LuxOS apps in LSL, Xfce), in Terminal, Firefox and Mail. Moving the pointer with the touchpad, a tap or a click stops the glide (GTK alone would keep going). A new GTK moduleluxos-scroll(xsettingsGtk/Modules, re-added byluxos-sessionat login if something replaced the value) animates the wheel only in a real GtkScrolledWindow – an app's own scroll handler, Ctrl/Alt/Super+wheel (zoom), the touchpad, nested lists and programs with their own scrolling (games, Blender, Steam, Maps,htop/mc/lessin Terminal) are unchanged; with animations off (reduced motion, Battery Saver) the wheel jumps as before. Settings › Scrolling (luxos-scrolling, a new window in LSL, alsoluxos-scrolling status | kinetic on|off | smooth-wheel on|off) has the switches Smooth scrolling with the mouse wheel and Inertia on the touchpad and a link to Mouse and Touchpad settings; changes apply right away, also in open windows (~/.config/luxos/scrolling.conf). Terminal scrolls its history by pixels through GtkScrolledWindow (VTEscroll-unit-is-pixels), so the touchpad scrolls smoothly and with inertia. Firefox on X11 without XInput2 got only wheel notches from the touchpad – the session now setsMOZ_USE_XINPUT2=1(/etc/X11/xinit/xinitrc.d/50-luxos-firefox-xinput2.sh, from the next login) and the Firefox defaults turn on the pan gesture with inertia. Turning inertia off also applies to Firefox and Mail (the end of the gesture arrives 250 ms later, so the speed is zero). Teststest_luxos_scroll.pywith real XInput2 events from a private Xorg (inputtest driver, like xf86-input-libinput including the event after the fingers lift): inertia and deceleration, stopping by touch and tap, turning it off also while an app runs, smooth wheel with the same distance, Ctrl+wheel, an app's own handler, a nested list, reduced motion, VTE by pixels, WebKitGTK and a real Firefox 160; Terminal: the wheel in the history and inless. To check on a real touchpad: the speed and length of the glide, and edge scrolling (the LuxOS default). - Switching workspaces slides to the side like on macOS (
xfwm44.20.0-2.4,luxos-desktop69): when you switch workspaces (Ctrl+Super+arrow, Ctrl+Super+number, the workspace switcher in the top bar) the windows of the old workspace slide out and the new ones slide in – the next workspace from the right, the previous one from the left, also when jumping over several workspaces and when wrapping from the last workspace to the first in the direction of the key. The wallpaper, desktop icons, windows on all workspaces, the top bar, the Dock, menus and notifications stay put. The slide takes 420 ms with a gentle start and a soft settle, input is never blocked and quick repeated switching continues smoothly, keeping its speed, without queueing (also going back during the animation). A window carried along to another workspace stays in place. With several monitors each monitor slides on its own. Without the compositor and with reduced motion (Gtk/EnableAnimations off) workspaces switch instantly as before; options/general/workspace_slideand/general/workspace_slide_durationin the xfwm4 channel. The slide does not follow touchpad fingers yet (LuxOS has no touchpad gestures yet). - Top bar: centered clock, rounded corners and white text; desktop widgets (
luxos-desktop64,luxos-i18n71,luxos-docs57): a new bar pluginluxos-bar(in place of the expanding separator, added by itself at login). The wallpaper is always under the bar: the plugin paints the part of the wallpaper that lies under the bar, tinted like the bar – it looks like a transparent bar over the wallpaper, but a window behind the bar (a full-screen browser in the background, a window moved under the bar) never shows through and the bar never turns black; it follows the current desktop's wallpaper and light/dark mode. OtherwiseBAR_COVER=translucent(real transparency) orBAR_COVER=solid(opaque under windows; widgets and other "always below" windows do not count) in~/.config/luxos/appearance.conf. New appearance options:luxos-appearance bar-clock center(the clock exactly in the middle of the bar, Calendar opens below it),bar-style rounded(the bar is flush with the top of the screen and has rounded bottom corners; straight under a window) andbar-text white(white text even in light mode, on a smoky darkened bar). Desktop widgets (luxos-widgets on, off by default): widgets like on Android – each one is a separate card of coloured glass (its colour comes from the wallpaper under it, white text) that you drag anywhere (the position is remembered), right-click for "Edit Widgets…" and "Remove", a Widgets gallery in Launchpad with live previews, Add/Remove and a default layout. Widgets: clock with weather from the Weather app, system status with processor, memory and disk arcs, now playing music with controls, moon; a click opens Clock, Weather, Calendar or System Monitor. New Clock app (luxos-clock-app): alarm (weekdays or once, Snooze/Stop, rings even with the app closed), world clock, stopwatch with laps and timer. System Monitor sorts the list by name, processor or memory (click a column header, the choice is remembered). Fixed: the Wi-Fi icon in the bar stayed black even with white text – the network applet now runs as a StatusNotifier item (nm-applet --indicator) and the bar colours it like the other icons. The choice and order of cards and the side of the screen are in~/.config/luxos/widgets.conf. - Less memory in every session (
luxos-tweaks14,luxos-companion6,luxos-desktop65,luxos-guard7): the kernel reservevm.watermark_scale_factoris back at the default 10 – on a computer with 16 GB of RAM,freeshowed ~0.5 GB more "used" memory because of an oversized kernel reserve, although no program was using it (zram, earlyoom and everything else stay the same). The Lux Guard session helper (luxos-guard-agent) is now a small LSL program: ~0.5 MB instead of ~12 MB of Python for as long as you are logged in; question dialogs, notices and "Run in Sandbox" / "Move to Trash" are still done by Python, but only for a moment when something happens, and a helper started before the update switches to the new version by itself (no logout).luxos-hubprepares the Emoji & Symbols window on first use (~7 MB less in every session; the first opening takes ~0.5 s, later ones are instant as before). LuxOS Companion frees loaded calendars after the phone disconnects. In a clean session (4 GB VM, average of two measurements, no apps)free"used" 2 min after login 817 → 797 MiB, after 6 min 796 → 771 MiB; boot and login just as fast. - LuxOS starts with Secure Boot on – nothing to turn off on an ordinary Windows computer (new
luxos-secureboot1.0.0-1,luxos-care16,luxos-installer36,luxos-i18n68,luxos-docs54, ISO, kernellinux-luxossigned with the LuxOS key): until now firmware with Secure Boot on refused the ISO and the installed system ("Access Denied") and the only advice was to turn Secure Boot off – not acceptable for people coming from Windows and for companies (and BitLocker then asks for its recovery key). LuxOS now starts through a Microsoft-signed shim (the same file as Fedora, signed with Microsoft UEFI CA 2011 and 2023 – older and new computers), which starts the systemd-boot menu and the kernel signed with the LuxOS key. The key is added to the computer once, on the first start from the USB stick: blue shim screen → OK → any key → MokManager Enroll key from disk → disk →LUXOS_ENROLL_THIS_KEY.cer(right at the top) → Continue → Yes → Reboot (11 keys, no typing); the installed system then starts directly. If the USB stick was started with Secure Boot off, the installer prepares the key itself and shows a one-time 8-digit password – on the first start just Enroll MOK → Continue → Yes → password (SECUREBOOT_ENROLL=auto|yes|no). Existing installs get shim with an update:EFI/LuxOS(shim, MokManager, signed systemd-boot) is added to the EFI partition, the "LuxOS" boot entry goes first and the old one stays as a backup until LuxOS has started once through shim; without Secure Boot nothing changes. To turn Secure Boot on afterwards:sudo luxos-secureboot enroll(MokManager waits 60 s instead of 10 s), state:luxos-secureboot status. DKMS drivers (NVIDIA, Broadcom) load with Secure Boot without any extra step;enrollalso adds the computer's DKMS key. System snapshots start with Secure Boot too (the kernel is signed in the package); older snapshots and the previous kernel from before signing show "- needs Secure Boot off" in the menu and LuxOS Recovery then starts with the signed kernel. Only the maintainer has the private key (the Safe); CI builds unsigned packages and signing happens before publishing (scripts/sb-sign.sh;publish-repo.shrefuses an unsigned kernel). Tested in QEMU with OVMF and Microsoft keys (test key): ISO 1.0.1 refused; new ISO → key enrollment → live system with Secure Boot; installation and start with Secure Boot; snapshot start; out-of-tree module unsigned and signed with a DKMS key in MOK; a 1.0.1 install upgraded with the packages starts without Secure Boot through shim and, after enrolling, with Secure Boot on; firmware with only CA 2011 accepts shim, without the third-party CA (Secured-core) it refuses it – explained in the manual. Guide with screenshots: the Secure Boot manual page and Secure Boot: first start on the website; plan for LuxOS's own Microsoft-signed shim (no MokManager step):docs/proposals/secure-boot.md. Also fixed along the way:sbverify --certreports "OK" even for foreign chains (Microsoft's shim) – the check now requires the LuxOS certificate in the signature. - LuxAI: quizzes one question at a time – cards that slide (
luxai2.0.2-6,luxos-docs50): a quiz with two or more questions is no longer one long column. Each question has its own card with a "Question 2/5" header and a progress bar (green correct, red wrong; click a segment to jump to that question), Back / Next buttons and a short sideways slide (instant when animations are turned off – "reduce motion"). All cards are as tall as the tallest question, so the quiz does not jump while paging; the verdict with its explanation and the hint slide open smoothly. Keyboard: ←/→ or Page Up/Page Down, 1–9 or A–D to answer, Enter to check / go on. After the last question a summary shows the score and percentage, the questions with ✓/✗ (click one to go back), Try again, Shuffle and try again and Show all questions (the previous list with all answers; One question at a time switches back). The current question, the answers and the chosen mode are saved in the conversation; quizzes saved earlier open at the first unanswered question. The model can write"mode": "list"for a short self-check. Fixed along the way: the account refresh about 1.5 s after every answer moved the focus back to the message field, so keys no longer reached the quiz (or a calculator or selected text); long options of questions with several correct answers did not wrap and widened the card in narrow windows; the ✓/✗ colours of the verdict are easier to read in the dark theme. Tests: the state machine (navigation, score, saving, old and damaged state, shuffling, keys) and GUI under Xvfb with real mouse and keyboard events (5 questions, summary, Try again, list, the real "Mocniny" quiz also on HiDPI, reduced motion, narrow window). - LuxAI: rich answers – charts, quizzes, calculators, diagrams, formulas, tables, maps and more right in the answer (
luxai2.0.2-4,luxos-docs47): LuxAI can now show interactive charts (hover values, PNG/SVG export), quizzes with hints and a score, calculators with sliders and switches (a safe formula evaluator, no code is run), sortable tables with CSV export, flowcharts, sequence and timeline diagrams, sanitized SVG drawings, typeset math, places with "Open in Maps", image galleries (only after you allow the network), timelines and checklists. Quiz answers, ticks and values are saved with the conversation.
Fixed
- Firefox welcome page: tiles and import never "do nothing" again (
luxos-desktop78): in a Firefox started before a LuxOS update (olderluxos.cfgloaded), the Store, LuxAI, Keyboard shortcuts and Report a problem tiles led nowhere and the import button gave no feedback. The page now first says hello to Firefox; depending on the answer the tiles open the app or – without an answer – its help page on the web, and import also shows where to find it in Settings and that the button works directly after restarting Firefox. It also works in further windows, in pages opened later from the command line and after a session restore (covered by tests). The brief camera light during import was not reproduced: neither the import nor the page calls the camera, the portal or PipeWire; the only thing started around it is xdg-desktop-portal when Firefox starts. - LuxAI: Ctrl+W closes the window (
luxai2.0.2-9): like in the other LuxOS apps and on macOS, Ctrl+W closes the LuxAI window (before only Ctrl+Q worked). - GUI tests can never touch the real screen and session again (tests,
scripts/luxos_testguard.py,scripts/luxos-testguard.sh): a test started by mistake withDISPLAY=:0switched the keyboard layout of the running session and opened windows on the real screen. All GUI tests (Python and shell,scripts/check-titlebars.sh) now load a guard first: a display that is not a test Xvfb is replaced with the test's own Xvfb (stopped with the test), the real session's D-Bus bus is dropped and the real user's home,XDG_RUNTIME_DIRandXDG_*are replaced with temporary ones. No variable can override it. - Control Center: long tile names are no longer cut off (
luxos-desktop74): in German "Datensparmodus" and "Stromsparmodus" became "Datensparmod…" and "Stromsparmod…", in French, Polish and Hungarian even more was cut. A longer name now uses a smaller font and two lines when needed ("Économiseur / de batterie"), and is shortened only after that. - Live ISO: the desktop ~13 s sooner, no double mDNS and the label LUXOS (ISO,
lux0.3.0-27,luxos-installer41,luxos-tweaks16,luxos-i18n79,luxos-docs68): on the live ISO the desktop waited for the signing keyring (lux-keyring-init, ~13 s of gpg) and ldconfig ran at every start (~8 s) although the library cache in the ISO is current. The keyring is now prepared in the background (a timer, lower priority) and the installer andlux(e.g. installing from the Store right after start) wait for it before use ("Preparing the package signing keys…"); the ISO carries/etc/.updated, so ldconfig no longer runs. Avahi and systemd-resolved both announced the computer name ("Detected another IPv4 mDNS stack", computer renamed to "luxos-2") – mDNS is now done only by Avahi. MokManager showed the disk as "ARCHISO_EFI" when enrolling the Secure Boot key – now "LUXOS". - Small fixes from the audit (
luxos-care21,luxos-account9,luxos-desktop75,luxos-sandbox8,lux-engine7.1.0.r9.g54d9411-3.7,luxos-i18n79): LuxOS Recovery had English "Yes / No" buttons in its confirmations; in the installer (LuxAI step) the e-mail field was focused right away, so its "E-mail" hint disappeared and an unlabelled empty field was left – an empty field is no longer focused; the Update button in the Welcome window opens Software Update instead of a Terminal withsudo lux update, there is space above the buttons and the window appears 2 s sooner; sandbox setup (pacstrap) runs outside the session's process limit like the installer;lux config checkprints the update channel line translated. - Installing on a computer with 4 GB of RAM no longer fails with signature errors, and reinstalling over an encrypted LuxOS works (
luxos-installer40): a full install test in a virtual machine with 4 GB of RAM and Secure Boot on ended with "Installation failed – The packages could not be installed. Check the internet connection" even after five attempts, with hundreds of "GPGME error" and "missing required signature" lines in the log. The internet was not to blame: the installer runs in the logged-in session, which since LuxOS 1.0.1 (fork bomb protection) has a limit of about 1,500 processes on 4 GB of RAM. pacstrap leaves behind one gpg process after every signature check that nobody cleans up – over 1,400 in a basic install – so at the limit the signature check of further packages could not start. The installer (graphical, and the text one in the Terminal) now moves itself into its own system unit without the limit (systemd-run --scope; input, output and the installer's buttons keep working) – in the VM the peak was 1,588 processes and the install went through. A second bug from the same test: a new install without encryption on a disk that had an encrypted LuxOS failed right after creating the file system ("unknown filesystem type 'crypto_LUKS'") – the old LUKS header at the same place on the disk survived. New partitions are now cleared of old signatures before formatting (wipefs; next to Windows only the new partition) and are mounted explicitly as btrfs. Teststest-install-scope.sh,test-wipe.sh. - The installer speaks your language down to the last detail (
luxos-installer40,luxos-i18n78): the graphical installer wrote sizes and the download speed with a decimal point in every language ("Stahuji 1.4 GB · 4.5 MB/s") – now with a decimal comma in all languages except English; percentages per language ("42 %" in Czech, "42%" in English). Text installer: the buttons of the time zone question were English "Yes / No", the summary was jumbled in Czech ("Časové pásmoEurope/Prague" – the alignment counted bytes instead of characters), language and keyboard were shown as codes ("cs_CZ.UTF-8", "cz, us") instead of names, a disk without a model as English "disk", sizes without a space ("43GB"), the question "Who will use this computer?" appeared twice in a row and the account and organization headings showed no chosen answer. - All 12 languages fully translated – Launchpad too (
luxos-i18n78,luxos-desktop73,luxos-care20,luxos-installer40): a check of all translations found 131 texts missing in 9 languages (93 in Slovak and German) – LuxOS Recovery, Reset App Settings, widgets, alarms and Now Playing (a Spanish or Ukrainian system showed these screens in English). Added with native translations; the feature name "LuxOS Recovery" is the same everywhere as in the boot menu. The Ukrainian confirmation word for reinstalling would have been empty in LuxOS Recovery (compared without diacritics) so a bare Enter would have confirmed it – it is now written in Latin letters. A new testtest_tsv_complete.pychecks that every text is in all languages with the same %s/%d. The LuxOS settings (Toggle Dark Mode, About This Computer, Search, Control Center, Battery & Power, Widgets, Screen Saver & Lock…), Software Update, Install LuxOS, the screen savers and the bar plugins had only a Czech translation in their.desktopfiles, so Launchpad, Search and the menu showed English in the other 10 languages. A new tooldesktop-i18n.py(inluxos-i18n) addsName,GenericNameandCommentin all languages from the translation tables when the package is built, so they cannot drift apart; a test checks that no text is missing. luxin the Terminal: correct advice and localized numbers (lux0.3.0-26,luxos-i18n78,luxos-docs66):lux config countmesuggested turning it off withsudo lux-config set-countme off, which does not exist in the Terminal (the tool is outside PATH), and was English only – now translated and it suggestslux config countme off, oronwhen it is off. Sizes and times use the decimal comma outside English ("12,4 MB", "8,2 s").lux doctorended with a contradictory "Everything looks good" right under warnings (unneeded packages, log errors) – now "No serious problems - see the notes above".- The login screen 5 s sooner and no English sudo "lecture" (
luxos-tweaks15): the Secure Boot loader check (luxos-secureboot sync) runs at every start with low disk priority andgraphical.targetwaited for it – in the VM 8.8 s to the login screen, now 3.2 s (the check finishes in the background; setting the boot order at shutdown stays). The Update button in the Welcome window opened a Terminal with "We trust you have received the usual lecture from the local System Administrator…" – sudo no longer shows it. - Software Update: "Last update" also after updating from the Terminal (
luxos-care20): afterlux update(also from the Welcome window button) the window said "Last update: never", because only the automatic update recorded the time. It now also reads the package manager log. - Files: an unknown file or a folder no longer opens in LuxDrop, e-mail links without Thunderbird (
luxdrop7,luxos-desktop74,luxos-i18n78,luxos-docs67,luxos-mail11): the LuxDrop app claimed every file (application/octet-stream) and folders, so double-clicking a file of an unknown type could open LuxDrop instead of the app chooser. It now claims no type; sending still works through Send To › LuxDrop.mailto:links (in Files,xdg-email) went to Thunderbird, which is not installed by default – exo only showed an empty mail app chooser. The new helperluxos-mail-readeropens the app set for mailto links, otherwise an installed mail app (LuxOS Mail, Thunderbird also from Flathub, Evolution, Geary); without one it shows a notification and opens the LuxOS Store with a search for mail apps. The short Mail description in the Store matches its launcher. - The install count (countme) can no longer be inflated so easily (server change, deployed by the maintainer;
luxos-docs64, the LuxOS usage page): one IP address could add a new "computer" for every combination of version and channel – the server accepted any X.Y.Z version (even 99.999.999), so with the limit of 60 requests per hour one address could add about 10,000 fake counts a week and junk versions showed up. With IPv6 every address also counted separately, and anyone with a /64 network (an ordinary home computer) could add counts without limit. Now each network – an IPv4 address, or an IPv6 /64 prefix (IPv4-mapped and NAT64 addresses count as that IPv4 address) – is counted at most once a week, whatever it sends (the first request of the week wins; a real computer sends once a week). Only released LuxOS versions are accepted, plus the next ones that staging reports before a release, so releasing 1.0.2 loses nothing; anything else gets an error and old junk is no longer shown. When a week's total jumps above ten times the previous week, the service logs one line (no IP addresses) so the maintainer notices. Privacy is unchanged: only weekly counters on disk, the weekly key only in memory, no request logs. Many different addresses (botnets, rotating proxies) cannot be stopped without identifying computers – the website and the documentation now say so honestly ("an approximate lower bound"). The public pages no longer show the exact request format, only what is sent;lux config countmestill shows the exact request locally. - Look polished to the details: HiDPI window frames, coloured buttons in the video player too, visible keyboard focus, more readable menus (
luxos-themes2025.12.27-11,luxos-desktop71,luxos-docs64): with 2x window scaling (Settings › Appearance, HiDPI displays) windows had a half-height title bar with tiny buttons and a clipped title – LuxOS now ships the xfwm4 framesWhiteSur-Light/Dark-xhdpi(and-hdpi) and switches to them when the scaling changes (luxos-hub→ newluxos-appearance wm-theme; a custom xfwm4 theme is kept). GTK 4/libadwaita apps (Videos – Celluloid) drew grey × – □ buttons instead of the red, yellow and green circles of all other windows; a managed block in~/.config/gtk-4.0/gtk.css(the rest of the file stays yours) aligns them in light and dark mode, with grey circles in inactive windows like in macOS. The WhiteSur theme turned the focus ring off everywhere, so with the keyboard (Tab) you could not see which button, checkbox or tab was selected – now they get a blue ring like in macOS, only after keyboard use (not after a mouse click). GTK menus were 16 % transparent without background blur, so icons and text of the window below showed between the items – now 94 % opaque. On the Text size slider (Displays) the knob covered the "Default" label. Cursors: the namesew-resize,ns-resize(column dividers in Firefox, GTK 4, Qt),all-resize,dnd-linkand a few more were missing from the theme and an Adwaita cursor of a different style appeared instead. The default GTK 4settings.inihad dark-mode icons for light mode. - GTK 3 apps no longer crash when smooth scrolling disappears from
Gtk/Modules(luxos-desktop71): when something removedluxos-scrollfrom the xsettings valueGtk/Modules(Settings Editor, another program overwriting it), GTK unloaded the module and every running GTK 3 app includingxfsettingsdcrashed – taking the theme, fonts and dark mode with it until the next login. The module now stays loaded (g_module_make_resident). - The window title of Printers & Scanners, Feedback and the installer is the same size as in other windows (
luxos-printing16,luxos-desktop71,luxos-installer39): their own big-heading style (class.title) also enlarged the title in the window's title bar to 20–24 px bold. Page headings have their own class now; a new test checks all packages so that a bare.title/.subtitlenext to a HeaderBar does not come back. - Clock: shortcuts like elsewhere, an alarm no longer rings forever, translated into all languages (
luxos-desktop72,luxos-i18n77,luxos-docs65): Ctrl+W and Ctrl+Q close the window (alarms keep running in the background), Esc closes the new-alarm form. An alarm nobody answers (unattended computer) goes quiet after 10 minutes and closes its window – the notification stays; before, it rang until someone stopped it. The stopwatch and timer button is "Vynulovat" in Czech (before "Obnovit výchozí", which did not fit the round button), the window no longer widens when the timer or the alarm form opens, and the window icon is sharp in the Dock and Alt+Tab (16–128 px). Clock was only in Czech, Slovak and German – now in all 12 languages, including its name and description in Launchpad and its Store description. - Calculator: pasting from the clipboard (
luxos-desktop72): Ctrl+V with "NaN" or "Infinity" is ignored (before, the display showed "NaN" or "In fin ity"),1e5pastes as 100,000 and a number longer than the display is shown rounded (the full value is used) instead of overflowing the window. A lone number and = (e.g. "5 =") followed by a digit starts a new number (before "55"), "1. =" shows 1. Calculator has its name and description in Launchpad in all 12 languages. - Double-click in Files opens the right app (
luxos-desktop72,luxos-docs65): PDF, PostScript, DjVu, XPS and comic books (CBZ/CBR) open in the Document Viewer, images in the Image Viewer and archives (ZIP, 7z, RAR, tar.*) in the Archive Manager – before, the order inmimeinfo.cachedecided, so a PDF could end up in Firefox and a ZIP in PrismLauncher after installing it. Your own choice in Open With still wins, an app that is not installed is skipped. - App names in every language (
luxos-desktop72,luxos-store19,luxos-i18n77): Files, Image Viewer, Videos, Archive Manager and the other renamed apps had their short name only in English and Czech – in German, Ukrainian and the other languages Launchpad, the Dock and the top bar showed the English "Files". The name now comes from the LuxOS translations for all 12 languages; the same for the name and description of the LuxOS Store. - Text Editor: readable tabs and read-only files (
luxos-text5,luxos-i18n77,luxos-docs65): with several tabs open, the file names on the tabs shrank to "…" – now at least 16 characters of the name stay visible. Saving a file you may not change (read-only, another user's or a system folder) offers Save As… instead of just an error, so changes are not lost, also when closing the window. - Store, Weather and Maps: shortcuts and a sharp icon (
luxos-store19,luxos-weather6,luxos-maps9,luxos-docs65): Ctrl+F searches (in Weather also Ctrl+N), Ctrl+W and Ctrl+Q close the window like in the other LuxOS apps, Ctrl+R refreshes the forecast in Weather. The window icon is sharp in the Dock and Alt+Tab (16–128 px instead of one size). Store and Weather no longer print warnings about deprecated GTK/GLib functions. Ctrl+F, Ctrl+L, Ctrl+W and Ctrl+Q in Maps also work with Caps Lock on. - Thumbnails of EPUB, LibreOffice documents and RAW photos in Files – and no errors at every login (
luxos-desktop74): the thumbnail service (tumbler) reported "Failed to load plugin" for EPUB, ODF and RAW thumbnails at every start because their libraries were missing – and those files had no thumbnails. LuxOS now bringslibgepub,libgsfandlibopenraw(about 5 MB together). - Control Center: a Wi-Fi network name with a colon without a backslash (
luxos-desktop74): the network "Café: 5G" was shown as "Café\: 5G" on the Wi-Fi tile and in the "Sign In to…" link –nmcli -tescapes colons in values and Control Center did not undo it. - No "Failed to restart the panel" window at login and when the bar look changes (
luxos-desktop74): when the top bar was restarted twice in a row (at the first login after an updateluxos-appearancerefreshes the bar look whileluxos-searchadds the magnifier) or while the panel was still starting, a window with a technical D-Bus error appeared ("Object does not exist at path /org/xfce/Panel", "The name org.xfce.Panel was not provided"). A bar restart now waits until the panel of this session really runs, restarts go one at a time and the next one only after the new panel is up; a panel of another session of the same user is not restarted. - A top bar with white text switches to dark text by itself on a light wallpaper (
luxos-desktop74,luxos-docs67): with white bar text (luxos-appearance bar-text white) a white, beige or other very light wallpaper only made the bar darken into a grey veil. The bar now measures the contrast of white text over the wallpaper area under it (WCAG, on the monitor with the bar, wallpaper of the active workspace) and when it is too low switches to dark text and dark icons – clock, app name, status icons including Wi-Fi, workspace numbers, battery – with a light tint; on a darker wallpaper it goes back to white. Hysteresis (dark below 2.0 : 1, white only above 2.3 : 1) keeps the bar from flickering on a wallpaper on the edge; lighter but readable wallpapers such as Sunrise (~2.4 : 1) keep white text. It is re-checked when the wallpaper, workspace, monitor or bar opacity changes. The switch needs no bar restart – the bar and the wallpaper under it never disappear, the panel's icons and text change at once and the plugins in their own processes (logo, keyboard layout, sound, bell) are restarted by the panel in a fraction of a second; when switching quickly between workspaces with different wallpapers only once at the end. - Backups: encryption is no longer silently lost with an SFTP server (
luxos-backup1.0.0-4,luxos-i18n80,luxos-docs69): in Add Backup Disk you could turn on Encrypt backups, type a password and add ansftp://server – but backups are copied to the server as plain folders (rsync) and the password was dropped, so the backups were unencrypted although the window promised otherwise. Now the window explains that USB disks and shared folders (SMB) can be encrypted, and does not add the disk. An empty server address no longer makes Use Disk silently do nothing – it asks you to enter one. - Lux Guard: deleted programs no longer stay in the window, and restoring files runs once (
luxos-guard1.0.0-9): Watched files kept showing files that had been deleted or moved (the service remembers them by inode), with a Run in Sandbox button that ran nothing – now only existing files are listed. A second click on Restore while a restore from a snapshot was running started a second copy of the same files at the same time; now it waits for the first. - Settings polished down to the details (
luxos-desktop1.1.0-76,luxos-companion1.0.0-7,luxos-docs69): Battery & Power opened scrolled down to the power modes (GTK scrolled to the first button) – now it opens at the top with the battery status; the power mode and the Battery Saver switch show the real state, also after Battery Saver is turned on elsewhere (Control Center, automatically at 20 %) or right there (Battery Saver switches the mode to Power Saver – Balanced used to stay selected). Screen Saver & Lock showed "Never" / "Immediately" for a value not in the list (e.g. locking after 3 minutes set by an administrator) – now the real value. About This Computer shows memory as on the box (16 GB instead of "15.0 GB") and short graphics names ("NVIDIA GeForce GTX 1650 Mobile" instead of the long lspci line that stretched the window across half the screen); a vendor or graphics name with "&" no longer breaks the window. The wallpaper is set on all workspaces, not only the first four. Desktop & Dock: Magnification size is greyed out while Magnification is off, and the Boot Screen hint is no longer indented. Bluetooth on a computer without an adapter shows only the message – it used to show an empty name with a Rename button and "Searching… Put the device into pairing mode". The window title check (scripts/check-titlebars.sh) runs the windows on a private system bus, so it no longer makes the real Bluetooth adapter visible or scans for nearby devices. The Phone window without a PyGI warning in the console. - LuxOS Recovery – leftovers done: old snapshots are deleted again, no duplicate boot entry, boot menu after a failed start also with GRUB (
luxos-care19,luxos-i18n76,luxos-docs63,lux0.3.0-25): the "before rollback" and "before reinstall" snapshots (the previous system subvolume) contain nested systemd subvolumes (var/lib/machines,var/lib/portables) andbtrfs subvolume deleterefused them ("Directory not empty") – old snapshots were never deleted, so disk usage and boot entries kept growing (9 instead of 5 in a VM); they are now deleted including the nested ones (-R). The systemd-boot menu on a disk with only LuxOS no longer shows "EFI Default Loader" – it was just a second LuxOS start through the fallback shim (EFI/BOOT/BOOTX64.EFIstays for firmware like Acer;auto-entries noinloader.conf, only when no other system is on the EFI partition). The boot menu after a failed start now also works on older computers with GRUB (BIOS): variableluxos_menuingrubenv, menu for 10 s; two snapshots from the same minute show seconds in the GRUB menu (before: the same name twice). Reinstall progress in LuxOS Recovery ("Installing 41 packages"…) is in the system language, and the "LuxOS was restored" notification and thelux rollbacklist show the snapshot name in the system language. - LuxOS Recovery verified on a real install – and fixed so it really rescues (
luxos-care18,luxos-i18n75,luxos-docs62): the whole recovery was tested in a virtual machine with Secure Boot on and off (shim → signed systemd-boot), with an encrypted disk and with an almost full EFI partition. The "LuxOS Recovery" entry and the snapshot entries appear and start with Secure Boot too (copies of the signed kernel). The boot menu now appears by itself after a failed start: after every system change (update, install, restore, reinstall) LuxOS watches the next start; if it does not finish (LuxOS or the login screen does not come up, the power goes off), the following start shows the boot menu for 10 s with LuxOS Recovery and the snapshots – no need to press Space. Normal starts still do not wait. Just opening Recovery changes nothing (verified by comparing the disk before and after: system,/homeand snapshots unchanged) and the screen now says so: "Nothing is changed until you choose an action and confirm it." Reinstall lists exactly what will be lost before you confirm – apps not from the LuxOS repositories by name (AUR, community, installed by hand), settings in/etcyou changed yourself and programs in/optand/usr/local– and what is kept (accounts and Wi‑Fi networks by name). Fixed: reinstall from Recovery did not work at all (downloads as useralpmfailed with "Permission denied", then "conflicting files" for the microcode on the EFI partition); after a reinstall the login screen did not start (missingdisplay-manager.servicealias) the system could not update (missing/etc/lux/keyring) and the system language was not generated (locale-gen, "Cannot set LC_CTYPE"); Flathub apps (/var/lib/flatpak) andsubuid/subgidare now carried over. The EFI partition repair reported success even when it fixed nothing – it now repairs a boot sector that differs from its backup and judges the result by a check after the repair. The service after restoring a snapshot crashed (add_event() got multiple values for argument 'kind'), so the "LuxOS was restored" notification never appeared. On a Czech keyboard the menu accepted numbers only with Shift (6 = ž) – now the top row works without Shift, the confirmation word can be typed without accents or capitals, and the Recovery text shows Czech letters (fonteurlatgrviavconsole.font). Snapshot names are in the system language and list the apps that were changing at that time. New help page "LuxOS Recovery" (how to open it, what each option does, what is kept). - Widgets: translucent glass that follows the wallpaper (
luxos-desktop1.1.0-69): blurred wallpaper with a soft milky veil, a light highlight and a thin edge. On a light background the glass stays light with dark text, on a dark one tinted glass with white text; contrast is adjusted for the whole card area. Finer typography without shadows, and CPU, memory and disk meters coloured to match the text; the same look in the gallery. The backdrop is prepared when the wallpaper or monitor changes, moving a card only changes the crop. Fixed wallpaper mapping with a different aspect ratio. Verified on warm, blue and white wallpapers under Xvfb; tests for contrast, blur, keeping light glass and the original widget functions. - Apps from another workspace no longer show up on the current one (
xfwm44.20.0-2.4,luxos-desktop69): a real case – after switching workspaces a window of an app that was in the background on another workspace sometimes appeared on top of the new one. The cause was not the workspace slide (it happened with the slide off too) but xfwm4's default "activate_action = bring": when a window on another workspace was activated (a Dock icon click, a link opened in an already running browser, a notification, an app calling "present" on itself) or raised itself, xfwm4 moved it to the current workspace and put it in front. Now, like macOS, LuxOS switches to the workspace the window is on, and a window on another workspace that raises itself only asks for attention (the workspace stays). Profiles still on the old "bring" are moved to "switch" once (your own choice of "none" is kept). - The workspace slide is smoother, no longer abrupt (
xfwm44.20.0-2.4,luxos-desktop69): the first version started at full speed (ease-out) and its first frames jumped 300–500 px at once, because the first frame after a switch takes longer (apps are repainting the windows of the new workspace). Now it uses the "ease" curve like Spaces on macOS (cubic-bezier 0.25 0.1 0.25 1) and 420 ms instead of 280 ms (a profile still on the old 280 ms is moved over once); every frame advances by exactly one display refresh interval, a slow first frame is not made up with a jump (the slide simply lasts one frame longer) and later delays are caught up gradually. Measured (GLX, 1920×1080): the largest change of step between neighbouring frames went from 210–265 px to 43–50 px, the first two frames from 110 + 313 px to 27 + 50 px. Quick repeated switching continues at the current speed (when reversing it slows down first), a longer trip across several workspaces takes proportionally longer instead of flying, and the settle is drawn with sub-pixel offsets (no one-pixel stutter). Also fixed: black corners on windows with rounded corners during the slide and their "pop" at the end. - Full-screen video and presentations: the top bar no longer stays over the picture (
xfwm44.20.0-2.3): a real case – a video in a local HTML presentation in Firefox went full screen and the top bar with the clock and workspaces stayed over the top of the picture; it could not be hidden, not even by clicking into the video. The cause: when the video started, the Music card of the LuxOS desktop widgets appeared (a window that does not take focus). xfwm4 put the full-screen window below the bar and the Dock in advance, as soon as the new window appeared, and the new window then did not take the focus – the video stayed focused but below the bar, and a click into the focused window no longer changed its layer. Activating the Dock or another window that does not take focus, or Alt+Tab to it, did the same. Now a full-screen window goes below the bar only for a window that really takes the focus, and a click into a focused full-screen window always brings it back above the bar and the Dock. After leaving full screen (Esc) the bar is back. Tests (under Xvfb, with and without the compositor):luxos-desktop/tests/test_luxos_windows.py– a full-screen window above the bar and the Dock, after a widget that does not take focus appears, after the Dock is activated, after Alt+Tab and clicks, after a workspace switch with and without the slide. - The Dock always magnifies the icons under the pointer – also with Battery Saver on (
luxos-desktop69,luxos-i18n73,luxos-docs60): Battery Saver (by hand, from Control Center and automatically at 20 %) used to turn off Dock magnification, so the icons magnified "sometimes" and sometimes not – depending on whether the saver was on. Magnification is only drawn while the pointer is over the Dock and saves practically no energy, so the saver no longer changes it (the description in Battery & Power is updated). Where an earlier version turned it off, the original value comes back by itself right after the update in a running session (no logout), otherwise at login; your own "Magnification" choice in Desktop & Dock is not changed. The Dock itself was checked in an isolated Xvfb + xfwm4 session with compositing (new testpackages/plank/tests/dock_zoom.py, 32 situations): magnification works when the pointer arrives from below, from the side, by a jump, when coming back quickly during the zoom-out, after turning compositing off and on, after a sliding workspace switch, after a full-screen window, with the Dock hidden, after an icon menu, after another app grabbed the pointer and after changing the magnification size. Also fixed: an error message/max_brightnesswhen turning the saver on or off on a computer without a backlight. - Lock screen after opening the lid: a clear Caps Lock warning and the keyboard layout, a password typed right after waking is no longer cut off (
xfce4-screensaver4.20.2-1.5,luxos-greeter1.0.0-11,luxos-i18n72,luxos-docs59): a real case – after closing and opening the lid the user could not unlock because Caps Lock was on, and the screen did not say so. The "Caps Lock is on" warning shared its row with messages: after a wrong password the error replaced it and it never came back (not even while typing again), and the fingerprint hint hid it too. Now it has its own row under the password field with a Caps Lock icon, shown whenever Caps Lock is on (the state comes straight from the X server, also when Caps Lock was on before the lock screen appeared, and changes show at once); a wrong password typed with Caps Lock on says "Incorrect password – Caps Lock is on". With more than one layout the current layout (e.g. CZ) is shown under the field too – a click or the shortcut from Keyboard Layouts switches it, and a switch by shortcut shows at once (before: after a second). A password typed right after opening the lid, before the field appeared, was cut off after 16 key presses (Shift included) – now 64 are kept and modifier keys alone do not count. If the lock screen was already open when the computer went to sleep, a half-typed password (the new one would be appended to it) and an old error are cleared on wake. The error has a dark backing, so it is readable on a light wallpaper. The same on the login screen. Tests:xfce4-screensaver/tests/test-lock-kbd.c, under Xvfbtests/gui-caps-lock.pyin both packages. - Lock screen: the lightning bolt is visible in the battery again while charging (
xfce4-screensaver4.20.2-1.4,luxos-greeter1.0.0-10): the bolt was drawn in black in the middle of the icon, so below ~50 % charge (empty middle of the battery) it blended into the dark background and the battery looked as if it was not charging. The bolt is now white over the empty part and dark over the fill. The bolt also shows with the charger connected when the battery is not charging (full, charge thresholds), and the battery state refreshes every 5 s instead of 30 s – after plugging in the charger the change shows at once. - Launchpad: the mouse wheel scrolls the grid smoothly down, without jumping back up (
rofi2.0.0-1.3 in[luxos]): every turn revealed new rows, rofi loaded their icons in the background and filtered the list again after loading – and the LuxOS change always selected the first app at that moment, so the view jumped back to the top. The first item is now selected only when the search text changes. - Launchpad: missing apps Phone, Bluetooth, Software Update, Firewall, LuxAI Account and Volume Control (
luxos-desktop64,luxos-docs57): Launchpad hides Settings panels (like macOS), but these standalone apps also have the Settings category, so they were only in the Applications menu in the top bar. Launchpad now makes its own copy of them without the settings panel category (same ID – launch counts and sorting still apply, the menu and Search do not change); when sorting by category they are in Settings, Volume Control in Multimedia. - A full EFI partition no longer breaks booting: smaller initramfs, guarded space and no empty boot loaders (
luxos-secureboot1.0.0-3 – after the CI build the maintainer must sign it withscripts/sb-sign.sh package,luxos-care17,luxos-tweaks13,luxos-branding28,luxos-installer38,luxos-i18n70,luxos-docs56): a real case – the owner's 1 GB EFI partition (/boot) was 100 % full. On its first installluxos-secureboot synchit "No space left on device", still printed "Secure Boot loader updated" and left empty (0-byte)shimx64.efi,grubx64.efi,BOOTX64.EFIandmmx64.efi– the boot entry and BootNext pointed at an empty shim and only the firmware falling back to the old entry saved the boot (that is why MokManager never appeared); a truncatedinitramfs-linux-luxos-prev.img.new(65 MB) was left too. Cause:set -edoes not apply input … && changed=1, so aftercpfailed,mvreplaced the file with the empty copy. Every write to the ESP now checks the free space first (for the whole set – nothing rather than half), writes a temporary file, syncs it, compares size and content with the package and only then renames it atomically; on any error the old file stays, nothing empty or partial is left and the error is clear (exit code ≠ 0). BootNext and the first place in the boot order are never set to an entry whose shim or systemd-boot is missing, empty or not an EFI file (MZheader) – a damaged one is moved to the end instead. Empty and partial leftovers of its own writes are recognized and repaired, foreign loaders are kept;luxos-secureboot statusreportsloader=brokenwithloader_damaged=,checkgives the reason. Initramfs 172 MB → 59 MB: the kms hook added the nouveau driver (blacklisted by the NVIDIA driver, never loaded) with the firmware of every NVIDIA GPU generation (~110 MB, already compressed) – the new initramfs hookluxos-slimleaves blacklisted modules that are not loaded out of autodetection; the Plymouth theme uses Inter Variable and Noto Sans Mono instead of the whole Inter.ttc collection and JetBrains Mono Nerd (−6 MB in every kernel copy). On a full partitionluxos-slimstops mkinitcpio before it would overwrite a working initramfs with a truncated one (with little free space mkinitcpio writes straight into the old image). Guarded space: snapshot kernel sets with the same kernel are merged (at most 2 variants, no snapshot loses its entry), before every transaction 100 MB plus room for one more kernel set stay free, otherwise the kernel sets of the oldest snapshots are removed (never the newest one or the snapshot the system runs from; the main and previous kernels are not sets);lux rollbackalso works to a snapshot without a set when the kernel version is the same. After every transaction (96-luxos-care-esp-check)*.new/*.tmpleftovers are removed and the initramfs is checked to be fully readable – a truncated one is rebuilt after freeing space, otherwise a loud error. The check after boot cleans the safe items itself and calmly reports an almost full partition (< 50 MB), a damaged initramfs or boot loader (carefree mode repairs them). Newsudo luxos-care esp-clean. The installer warns about an EFI partition smaller than 1 GB (new ones get 1 GiB). Also fixed: the previous kernel counted its old files as free space (the new copy is written next to them), a partial snapshot kernel set and*.luxos-newstayed on the partition after a failed copy,luxos-esp-sync(ESP shared with Windows) could leave a new kernel with the old initramfs. - Secure Boot: the blue key enrollment screen appears even on computers that reorder the boot entries their own way (Acer, HP, Lenovo) (
luxos-secureboot1.0.0-2,luxos-installer37,luxos-i18n69,luxos-docs55): a real case – on an Acer laptop (Insyde firmware) MokManager never appeared aftersudo luxos-secureboot enrolland a restart. The firmware had created its own "Linpus lite" entry for the fallbackEFI/BOOT/grubx64.efi(a copy of systemd-boot next to shim) and put it first; the LuxOS → shim entry ended up fourth, behind USB – so the computer started systemd-boot directly, without shim, and the enrollment was never confirmed. Now there is nogrubx64.efiinEFI/BOOT(BOOTX64.EFI= shim plus Fedora's fallbackfbx64.efi, which recreates the LuxOS entry fromEFI/LuxOS/BOOTX64.CSVafter a firmware reset and starts it – tested with Secure Boot on), entries the firmware created for the removed file on our EFI partition are deleted, the LuxOS → shim entry is put back first at every start (Windows and the other entries keep their order behind it) andenrollalso sets BootNext, so the next start goes through shim even if the firmware reorders again. Firmware that ignores or changes the boot order by itself (HP/Lenovo after Windows updates) is remembered and gets BootNext at every shutdown too.enrollsays which entry the next start uses; the newluxos-secureboot check(and a one-time "Secure Boot ready" notification) tells when Secure Boot can really be turned on in the firmware – key enrolled, started through shim and shim first in the order;sudo luxos-secureboot fix-bootfixes the order right away.statusalso showsboot_current,boot_first,boot_nextandsecure_boot_readyand warns when the blue screen would not appear. The installer prefers the shim entry over an old direct systemd-boot entry on a shared EFI partition and secures the first start of the installed system with BootNext. Also fixed: a direct start ofEFI/BOOT/grubx64.efi(Linpus lite) counted as a start through shim (statussaidboot_path=shim, the service removed the old entry),statuswithout root saidloader=missingandkernel=unsigned(only root can read the EFI partition – now the state from the service in/run/luxos-secureboot/status, otherwiseunknown), after a start without shimluxos_key=missingeven for an enrolled key (MokListRT exists only after shim – nowunknown), a foreignEFI/BOOT/grubx64.efiwas overwritten with systemd-boot. VM test (OVMF, Microsoft keys): the exact Acer state → before: "Linpus lite" started, no MokManager; now MokManager through BootNext even with "Linpus lite" first; after the entries were reset, start with Secure Boot on through the fallback. - A printer that was unplugged or turned off prints again by itself – no manual
cupsenable(luxos-printing1.0.0-15,luxos-i18n66,luxos-docs51): a real case – a Canon MF4100 queue (USB, UFR II) had been "paused – Unplugged or turned off" since 6 November, and after the printer was connected again days later documents just sat there while the app showed "unplugged".udev-configure-printer(system-config-printer) paused the queue on unplug and nothing ever resumes it; LuxOS had disabled its udev rule, and with it the part that resumed the queue on plug-in. Now queues paused because the printer was away resume by themselves as soon as the printer is back (USB by serial number in sysfs, otherwiselpinfo; network and IPP-USB through Avahi) – right when it is plugged in or announced, at start and with a check every 30 s that does not wake CUPS needlessly. A queue you paused stays paused; a queue that keeps stopping (broken driver) is retried after 5, 10, 20 … minutes. USB queues useprinter-error-policy=retry-current-job(the CUPS defaultstop-printerstops the queue, the previousretry-jobdiscarded the document after 5 × 5 minutes): pulling the cable or turning the printer off while printing no longer stops the queue and the usb backend waits for the printer; network queues keepretry-job. Older queues are converted once on upgrade (LuxOS's own and USB queues with the defaultstop-printer; a policy someone chose is kept). A document printed while the printer is off waits and prints by itself. A short notification "Printer “X” is not connected – Connect the USB cable or turn the printer on. The document will print automatically." (on screen only, not kept in the bell); only if the document still waits after 5 minutes does one notification stay in the bell; after a queue is resumed: "Printer “X” is connected again". Printers & Scanners shows "Not connected – connect the USB cable or turn the printer on. Documents will print automatically.", the job says "Waiting for the printer" instead of "Printing…", and Resume appears only for a queue paused for another reason. Also fixed: a package upgrade did not restart theluxos-printing-watchwatcher (the old script kept running until reboot); the docs named a non-existent70-luxos-printing.rules. Tests: a fake CUPS in a temporary PATH, fake sysfs and udev/Avahi events (paused queue + plug-in → resumed and printed, migration runs once, no idle CUPS wake-ups, notification and app texts in English and Czech, the bash watcher); GUI under Xvfb. - Maps: the location arrow and dot glide smoothly while moving instead of jumping (
luxos-maps1.0.0-8,luxos-docs49): outside navigation (Show My Location with a LuxOS Companion phone) the dot jumped 20+ px with every position (about once a second) and the map jerked after it with a short fly-to; now the dot and the map move frame by frame like in Google/Apple Maps. Between positions the arrow keeps moving with the speed and direction (1.5 s, then it slows down smoothly instead of stopping dead), a new position is eased in with a critically damped spring (about 0.8 s, no speed jump – the old exponential easing jerked in the very first frame), and a jump over 100 m or after 20 s without signal is shown at once. In navigation the arrow no longer moves backwards on the route (GPS noise along the route used to pull it back: in a simulated walk with 2 m noise 1068 frames went backwards, now 0), stays on the route line through bends and with position errors up to 1.5× the accuracy (it used to hop off the route and back), and turns gradually through a bend (fastest map rotation 295 → 105 °/s, largest per-frame view shift 21 → 7 px). Below 0.8 m/s the direction does not change, and the accuracy circle resizes smoothly. Also fixed: zooming with the wheel during navigation stopped halfway (every navigation frame cancelled the zoom animation – now it zooms around the arrow), the grey "signal lost" arrow turned blue again after Re-center or a compass switch, and without a known direction dead reckoning would have moved the dot north. Animation runs only while something moves, never in a minimised window, with frames evenly spaced on the display refresh, at most 15 fps with Battery Saver and 10 with reduced motion. Measured under xvfb (car 13.9 m/s, 3 m GPS error): largest per-frame dot step 21.7 → 1.2 px, CPU of the whole window while following about 11 % (software rendering at 1000×700). - LuxAI: rich answers after the first real tests (
luxai2.0.2-5,luxos-docs48): a quiz whose JSON was on the same line as```quiz(Flash wrote it that way) showed "This block could not be shown" – such blocks, a closing fence stuck to the JSON,~~~, smart quotes and a missing closing fence now work, and the prompt no longer shows one-line examples; inline math with doubled backslashes no longer turns into "vecv" / "sqrt" and unknown commands keep their backslash; SVG text uses the system font and follows the theme, simple<style>rules are applied; new exact chart modes "function" (graphs of formulas with labelled points) and "plane" (points, vectors, segments, circles on equal axes) replace hand-drawn SVG graphs whose points missed the line. - The Dock no longer freezes halfway through magnifying icons and no longer crashes on a warning (
plank0.11.89-6.1 in[luxos], until now Plank from Arch): occasionally the Dock froze with a half-magnified icon after it was revealed and the mouse moved over it. Plank draws its animations with the GTK frame clock, but it never removed its "tick" and calledend_updating()on the clock without its ownbegin_updating()(an unbalanced counter); when frames stopped arriving during a running animation, every further redraw request was dropped and the Dock stayed frozen until something else redrew it. Now the tick is registered only during an animation (GTK balances the counter itself), and an animation watchdog restarts an animation that got no frame for 1 s, so revealing and magnifying jump to the state they should be in (with a simulated clock stop the Dock without the watchdog stays frozen and magnified, with it it recovers in about 1.0 s). While the mouse is over the Dock its position is also checked every 500 ms, so a lost "mouse left" event no longer leaves the Dock magnified and shown. Intermediate icon sizes while magnifying (48–72 px) are scaled from the full-size icon instead of rendering every size from SVG in the main loop (longest main-loop stall on the first magnification 9.4 → 4.9 ms, after an icon theme change 8.3 → 1.4 ms). Two crashes are fixed too: a GLib warning with a newline and invalid UTF-8 crashed Plank (SIGABRTinstring_replace–luxos-dockrestarted it after 1 s; this was also the crash "when switching light/dark mode"), and a.dockitemfile with a name in invalid UTF-8 (SIGSEGVwhen saving the icon list). Tests inpackages/plank/tests(isolated Xvfb + xfwm4 session with compositing, own HOME/XDG/D-Bus): a stress test of reveal/hover/leave with random timing (fixed Plank: 3500 cycles – 1500 of them while opening and closing windows, adding and removing icons and with tooltips – 700 magnification checks, 400 hides, 0 failures and no false watchdog triggers; the original Plank also survived 2000+ cycles, so the rare freeze is not triggered naturally in Xvfb and is verified by simulation), the watchdog, Logger/UTF-8 and main-loop responsiveness.
1.0.1 "Sirius" – 2026-11-08 (beta)
A bug-fix release of 1.0.0 "Sirius" with a new ISO: stability (fork bomb, /tmp on disk), firewall, Store descriptions and screenshots, Weather, windows like in macOS, emoji, printing and scanning. Installed systems get everything with lux update. Mail stays in the staging test channel for now (its changes are under Coming soon), and Lux Code stays at its previous version in the stable channel.
New
- /tmp lives on the disk instead of in RAM: LuxOS swaps only to zram, so everything in a tmpfs
/tmpalways took real memory – forgotten files (4.9 GB in one case) even filled the swap./tmpis now on the (encrypted) system disk in its own top-level Btrfs subvolume@tmp(nodev,nosuid, programs can still run from it), not part of system snapshots, rollback or backups, and emptied at every start. New installations get it from the installer; existing ones switch over by themselves from the next start, without any commands. Non-Btrfs roots, custom/tmpsetups and the live ISO are left alone. - LuxOS Store: a full description and real screenshots for every LuxOS app: all 29 LuxOS apps in the release catalog (LuxAI, Terminal, Text Editor, Maps, Weather, Calculator, LuxDrop, Backups, Vault, Firewall, Lux Guard and more) now have a long description – an intro and a list of their real features – in English and all 12 other LuxOS languages, shipped as AppStream metainfo in each package. 69 screenshots (1–3 per app, small WebP files) are generated automatically from the apps themselves.
- Weather: a live sky that matches the weather and time of day: instead of a plain gradient, Weather draws its own scene – clear, partly cloudy, overcast, fog, drizzle, rain, thunderstorm and snow, each by day, night, dawn and dusk – with the sun, the moon in its real phase, twinkling stars, drifting clouds, falling rain and snow and distant lightning. White text keeps good contrast. It is light on the battery: only moving parts are redrawn, and the animation stops when the window is inactive or minimized, in Battery Saver, with reduced motion, or when ⋯ › Animated background is off.
- Anonymous count of active installations – like Fedora's "countme": at most once per calendar week, when
luxis already downloading package lists as root, it sends one small extra request with only the LuxOS version, architecture, update channel and a rough installation-age group. No ID, computer name, hardware, app list or user data; it never delays an update and is not sent from the live ISO, containers or user sessions. It is on by default and can be turned off in Software Update › Privacy, withlux config countme off,countme = falsein/etc/lux/lux.confor in the installer; the totals are public on the usage page. - Firewall on from the start – and it breaks nothing: an external audit found the firewall off and services such as Postgres, dev servers, LuxDrop and Steam listening on all interfaces. LuxOS now has its own firewall, switched on right after
lux update(no restart) and on new installations, in its own nftables tableinet luxos– Tailscale, Podman, libvirt, Docker and ufw are left alone, and if rules fail to load the network stays open andluxos-firewall statussays why. Only new incoming connections are filtered; DHCP, IPv6, mDNS, printer and scanner discovery, local ping, and LuxDrop, Steam Remote Play, KDE Connect and Syncthing from the local network keep working. When a program wants to accept connections, a notification asks Allow / Keep Blocked; there is a new Settings › Firewall panel and theluxos-firewallcommand. - New windows open in free space, otherwise in a cascade – like in macOS: the first window goes to the center, the next ones to free space, and when there is none, each new window of the same app is offset by 28 px from the last, so a new window never lands exactly on top of another. Dialogs, windows with their own position and restored windows stay where they were; old profiles with the former centered default switch once at login.
- **Alt+
switches between the windows of the current app** (the key below Esc): the same switcher with previews as Alt+Tab, but only with the windows of the app you are in; Shift+Alt+goes backwards. It works by key position in every keyboard layout, and Super+` now also works on the key below Esc in the Czech layout. - Option "Group windows by application in Alt+Tab" (Keyboard Shortcuts › Windows, off by default): Alt+Tab shows each app only once (with its last used window); while holding Alt, the Down arrow or ` shows the windows of the selected app and the Up arrow returns to the app list.
- After a window manager update,
luxos-hubreplaces the running xfwm4 with the new version by itself (xfwm4 --replace, windows stay in place), so the changes apply without logging out. Closing the last window in the Alt+Tab switcher while switching no longer crashes the window manager. - Emoji & Symbols – typing emoji like in Windows and macOS:
Super+.orCtrl+Super+Spaceopens a small emoji panel next to the mouse pointer in any app (also findable in Launchpad and Search as Emoji & Symbols), in light and dark. Search works instantly by names and keywords in the system language and in English, ignoring accents and case; there are tabs for recently used and categories, and a remembered skin tone. Enter or a click inserts the emoji where you were typing and closes the panel, Shift+Enter keeps it open, Esc closes it; the original clipboard content is restored afterwards. - The
linecommand: picks lines of output or a file instead ofsed -norhead | tail–command | line 5,line 1,10,line 1-10,line 5-(to the end),line -1(the last line),line 3,7-9 file. Without negative numbers it streams and stops right after the last selected line. - Mirror and Extend in Control Center: with two or more monitors connected, Control Center shows a Displays section under brightness with Mirror, Extend and, on laptops, External only buttons; the active mode is highlighted and the current setup is described. No popup appears when a monitor is connected, switching is instant, and the mode is remembered per set of monitors. Mirroring no longer crops anything: all monitors share one resolution (the best common one with the same aspect ratio, or scaled), and Extend returns to 1:1 and restores the saved layout.
- Terminal: text selected with the mouse is copied to the clipboard right away: after releasing the left button, the selection (drag, double-click a word, triple-click a line, Shift+drag in mouse apps like mc or htop) is also copied to the clipboard, so you can paste it elsewhere with Ctrl+V – like terminals in macOS and Windows. It can be turned off with
copy_on_select = falsein the[terminal]section of~/.config/luxos/terminal.conf.
Fixed
- The notification bell in the bar shows a red dot when you have unread notifications: the old blue dot was recolored by GTK and almost invisible; the bell now draws its own sharp red dot on light and dark bars (crossed-out bell with a dot in Do Not Disturb), which disappears after opening the bell menu. A notification replaced by an app also updates its history entry instead of piling up new ones, and notifications closed by the app are marked as read.
- Updates no longer require merging configuration files by hand: after
sudo lux updateusers saw "New config files to review: /etc/lux/lux.conf.luxnew" without knowing what to do. LuxOS now merges new versions of configuration files right after each transaction, using the old package version as the base: in key = value files your values are always kept (andchannelandcountmeinlux.confalways belong to you), new keys, sections and comments are added. The result is written atomically with a.lux-oldbackup; only real conflicts are left forsudo lux config-diff. - Rolling back to an earlier system state (
luxos-care rollback) no longer reports an error at the end. The rollback worked, but the command ended with a Python error while writing the history and looked like it had failed. - Wi‑Fi QR code: the Copy button is visible again: the header button showed no icon and was practically invisible. It now shows its icon and copies the QR code image to the clipboard; a test checks the visible icon and the clipboard image.
- LSL IDE: in an English system some headers and messages were still in Czech – now everything goes through the IDE translations (a test makes sure every text has an English translation). The Symbol panel, completion, signature help and Go to Definition now find functions from local modules instead of "Unknown symbol", and the default window no longer exceeds small 1280×800 screens (at most 90% of the work area).
- Printers and scanners: scanner types in plain words: the subtitle showed raw, untranslated SANE types such as "Escl network scanner". It now shows translated labels such as "Network scanner (eSCL/AirScan)", "Multifunction device", "Flatbed scanner" or "Film scanner", and the connection (network/USB) for more scanner types.
- LuxAI: the agent status line shows a short path: instead of the full working folder path it uses
~for the home folder and shortens a long middle part to "…" (e.g.~/Projects/…/files/python). - Maps, Weather, Camera, the setup assistant, Printers and Scanning run from source load their own modules: older installed modules used to take precedence (even in tests); now the script's own folder comes first and the installed modules are only a fallback.
- Weather: no more Fahrenheit in Europe: an English LuxOS has
LANG=en_US.UTF-8, and Weather took "US" to mean the USA – showing °F, mph and inches even in Prague. Now a plainen_USonly means default English: the country of your first saved place and then your time zone decide, and °F is used only in the US and the few other countries that use it. On the first open Weather asks once Which units do you want to use? (°C / °F, with the detected one preselected); you can change it anytime in ⋯ › Units, and manually chosen units are kept. - Lux Guard: "Run in Sandbox" no longer scares you with a popup terminal: since the previous fix every text program and script started in a terminal that stayed open – confusing for ordinary users. A terminal now opens only when you are clearly working in a terminal, when the script clearly asks for input, or for launchers with
Terminal=true. Other text programs run in the sandbox without any window or terminal; their output is saved to a private file and one calm notification says whether the program finished safely in the sandbox. GUI programs still run in their own sandbox window. - LuxOS Store: the LuxOS Apps section shows the real LuxOS apps, and the update spinner turns on the first open: the section used to show libraries like "VTE Terminal for GTK3/GTK4", the
luxos-docspackage and Lux Simple Lang, while Terminal, Text Editor, Maps, Weather, Calculator, Backups, Vault, LuxDrop and other LuxOS apps were missing. It is now filled from a signed LuxOS app catalog built when the repository is published, so the Store also knows apps that are not installed. The spinner during the update check now turns right away. - Lux Guard: "Run in Sandbox" no longer opens a terminal needlessly: every script and
.desktoplauncher used to start in a terminal that stayed open – even GUI Python apps, zenity/yad installers and launchers withTerminal=false– while command-line programs ran in their own Xephyr window and lost their output. Lux Guard now recognizes the file type: GUI programs, AppImage, jar, exe, GUI scripts andTerminal=falselaunchers run only in their own window without a terminal; text programs and scripts run in a terminal that stays open for their output. - Security: the Canon UFR II driver left
/etc/cngplp2/accountandoptionswritable by everyone: any user could delete or fake another user's files there (including department IDs and print passwords). The folders now have mode 1777 (sticky bit, like/tmp), so writing still works but nobody can delete or overwrite other users' files; older installations are fixed by the package's install script. - Security: kernel addresses only for root:
kernel.kptr_restrict = 1– user programs see zeros in/proc/kallsyms, while root (perf, bpftrace, thescx_lavdscheduler) still sees real addresses. It applies right after the update, without a restart. - USB printers are set up only by LuxOS: the automatic setup from system-config-printer was faster than LuxOS and picked a worse driver (Canon MF4100: CARPS2 instead of UFR II LT). It is now disabled and the LuxOS helper adds the printer with a better driver choice; the LuxOS USB printer rule, which had never actually run, now runs last.
- Scanning: "open of device … failed: Invalid argument" (Canon MF4100 and other USB pixma scanners): a scanner can be opened by only one process at a time, and scanner discovery collided with reading its options.
scanimagecalls now take turns, and an open that fails because of another process is retried 4 times. - Security: LuxAI administrator mode no longer gives passwordless root to other programs: after turning on "No password" in LuxAI › Settings › Agent permissions, LuxAI wrote a polkit rule that allowed root without a password for any program in the user's session, not just LuxAI. Now no polkit rule is written and old ones are removed right on update (no logout needed); you enter the administrator password once and polkit remembers it for about 5 minutes only for the process that entered it (the running LuxAI), every other program gets a password dialog, and the helper additionally checks that it was started by a genuine, non-debugged LuxAI.
- Security: LuxOS Care no longer checks for updates in a predictable folder in
/tmp: the root update check used/tmp/lux-checkupdates-0, which any user could create in advance to make update checks and automatic updates fail until a restart, or make root write into a foreign folder. Root now uses its own/var/lib/luxos-care/checkupdates, and the fallback refuses folders it does not own, links and folders writable by others. - A fork bomb no longer freezes the computer – not after an update while running, not outside the Terminal: the earlier protection failed on a real laptop because LuxOS Care updated the Terminal during the session and the old, unprotected Terminal process kept receiving every new window. The Terminal service now has a new name, so every new window and tab is protected right after an update even next to the old process; every tab has process and memory limits, and a system-wide guard stops runaway process trees before memory runs out.
- The progress after login no longer stutters and looks like the system start: instead of a stuttering spinner, the same thin rounded bar as the boot splash appears where the password field was, so boot and login look like one whole. The bar follows the real progress of the session and finishes while the desktop fades in. The stutter came from a busy check loop sharing time with drawing, a lowered priority, and the screen running twice.
- Captive portal sign-in can be reopened after closing the window: in a hotel or on a train the sign-in window opened only once. Now, as long as the network blocks the internet, the "!" icon in the bar says "Sign in to the network for internet access" and opens the sign-in window (also for portals behind VPN DNS), Control Center has Sign in to network "<network>"…, and the notification with Sign In stays until closed and reminds you again after 5 minutes (then less and less often) – without ever reopening the window on its own.
- WebGPU works in Chromium: Chromium on Linux does not enable WebGPU without Vulkan flags, so pages such as browser games reported missing graphics. LuxOS creates
~/.config/chromium-flags.confwith--enable-features=Vulkanand--enable-unsafe-webgpuonce – only if you do not have one (your own flags are never changed).
1.0.0 "Sirius" – 2026-11-04 (beta)
Warning: this release is still unstable – expect bugs. All changes since 0.9.12 are in this section and the next one (the 1.0.0 test release of October 28).
New
- Sandboxed apps start like normal apps: after
lux install pi-coding-agent-bin(community → sandbox) you can just typepiin the terminal – before you got "command not found" and advice that did not even apply to command-line tools. Every program of a sandboxed app gets a small wrapper in~/.local/share/luxos/sandbox/bin, which is always last inPATH, so a system program of the same name (e.g. afterlux install --system pi) always wins. Apps with a window appear right away in Launchpad and the menu as "App (Sandbox)" with their own icon and run in their own Xephyr window. Launchers are kept in sync after install, removal, reset or deletion of the sandbox, at every login and afterlux update– apps installed earlier get them too, and if a wrapper is missing, the "command not found" handler creates it. After installing,luxtells you how to start the app and, for tools, how to install it into the system to use it with your files;lux removeremoves a sandboxed app from the sandbox. Security: sandbox data is untrusted – package databases,.desktopfiles and icons are read safely with size limits,Execand other keys are never taken over (only a cleaned name, description and category), icons only as plain PNG/SVG, and no wrappers are made for names the system has or forsudo,su,pkexec,passwd,ssh,gpg,luxand similar. Launchers use--net(internet only; the local network and the computer stay blocked). - Performance mode also uses the discrete graphics: on laptops with hybrid graphics (NVIDIA or a discrete AMD next to the integrated GPU), games and demanding apps run on the discrete GPU in Performance mode and on the integrated one in Balanced and Power Saver (battery); the desktop, compositor, top bar and Dock always stay on the integrated GPU. The power profile is the single source of truth:
luxos-hubfollows its changes over D-Bus and runs the new LSL programluxos-gpu apply. Native games and apps withPrefersNonDefaultGPU=truestart throughluxos-gpu run, which sets the same variables asprime-run(NVIDIA) orDRI_PRIME=1(AMD). Flathub apps – Steam, Heroic, Lutris, Bottles, Prism Launcher and installed games – get the variables in Flatpak user overrides (only missing keys; LuxOS removes what it added when you leave Performance), so CS2 and other Steam games run on NVIDIA even though Steam itself picks the integrated GPU. If Steam is running when the mode changes, a notification says to restart it. NVIDIA also gets PowerMizer "maximum performance", a discrete AMD GPU the high performance level. Choosing Performance turns off Battery Saver, and the power settings show which graphics card is used for games.prime-runstill works by hand. - LSL 0.10.8: compiling small and medium programs is 22–33 % faster than with 0.10.7; generated code and modules are unchanged.
- Maps suggest places as you type: in the search field and in the route Start and Destination fields, a list of suggestions appears while you type, like in Apple or Google Maps – first favourite and recent places and stops Maps already knows (ignoring accents and case, "namesti mir" finds "Náměstí Míru"), then places, addresses, streets, towns and stops from Photon (
photon.komoot.io, OpenStreetMap data, no account) sorted by distance from the map centre. Every row has a coloured icon by type, the name with the match highlighted, the street, town, country and distance. ↓/↑ and Enter or a click selects, Esc closes the list, Enter without a selection searches as before. A chosen place goes straight to its coordinates, a route is recalculated at once, and with location permission the first suggestion is My Location. Photon is used considerately (query after 250 ms of no typing, only the latest text, at most 7 results, a short cache, a 30 s pause after an error) and the window never waits for the network. Offline, your own places remain. ⋯ › Suggestions While Typing turns it off, Clear Recent Places deletes recent places,"suggest_url"sets another Photon server. - Fast suggestions in Maps from LuxOS's own geocoder: suggestions for Czechia and Slovakia now come from LuxOS's own service at
luxos.lux-ai.cz/geocodeinstead of public Photon, which took 2.5–3.8 s – towns and districts, streets, house addresses, places (shops, restaurants, sights…) and public transport stops (all platforms of a stop as one row), ignoring accents, nearer places first. The OpenStreetMap data is rebuilt every week. Maps asks after 150 ms of no typing (before 250 ms) and keeps one persistent HTTPS connection. Photon stays as a fallback outside Czechia and Slovakia, when the geocoder does not answer within 1.2 s, or when it finds fewer than 2 matching places. The list footer shows the source ("Suggestions: LuxOS" / "Suggestions: Photon"). Privacy: the server neither stores nor logs queries; rate limiting only keeps an in-memory counter per IP address. New setting"suggest_providers"(list of servers in order). lux searchwith aptitude-like patterns:^vim= name starts with vim,vim$= ends with vim,^vim$= exactly this name,*qt*= name contains qt;*is any characters and?one character (lib*-git), and they can be combined (^python-*qt*). Patterns search only package names, case-insensitively; a plain word still searches name and description, and several words or patterns must all match.%can be used instead of*(lux search %qt%) so the shell does not expand it – otherwise quote the pattern. Works for the repositories, LuxOS.luxapps, Flathub and the AUR. Newlux search --installedsearches only installed packages,.luxapps and Flatpaks. Help inlux search --help, the man page, bash completion andpackage-management.md.- LuxOS Companion 0.4 – model choice, tool progress, approval on the phone and the calendar on the phone: the computer announces only what the whole chain really supports – calendar reading and LuxAI models, tools and approvals only when the installed LuxAI offers them. The phone can choose the LuxAI model (an unavailable model is an error, never silently another one), sees running tools (name, state, short detail) and can allow or deny once, on the phone, actions LuxAI would confirm with a card on the computer – an approval is valid only for the connected phone, the running request and that action, for 60 s and only once; administrator commands and desktop control from the phone never. A new Calendar tab on the phone loads the events of a chosen day in the phone's time zone (all calendars, recurring, overnight, multi-day and all-day events). The Phone window has a new Allow Calendar Reading switch (on by default) and shows "LuxAI is waiting for your approval on the phone".
- LuxAI for LuxOS Companion 0.4: models, tool progress and approval on the phone:
luxai --remote-sessionannounces models, tools and approvals. The phone gets the same model menu as the app (Flash, Lite) and the chosen model is really used – an unknown model ends with an error, never silently another one. Every real tool call sends its state (running, done, error, waiting for approval) with a short detail; tokens, passwords,Authorizationheaders and the account token are removed. Actions LuxAI would confirm with a card on the computer are no longer denied straight away: the run waits for a one-time approval on the phone (60 s, then treated as denied). An approval is bound to the running request, the specific call and a SHA-256 fingerprint of its exact arguments, is valid only once and is invalidated by cancelling or disconnecting; "always allow" is never saved from the phone. Administrator commands, desktop control, sending feedback and dangerous actions are still always refused from the phone with "This action requires confirmation on the computer". - "LuxOS wallpapers with an analog clock" screensaver (Screensaver and Lock › Screensaver): LuxOS wallpapers cross-fade every 30 seconds with a large classic clock in the middle – hour, minute and a smoothly sweeping second hand – and the date below. The dial is light or dark to match the LuxOS appearance. Outside the fade only the clock square is redrawn, the next wallpaper is prepared in the background and nothing is drawn while the monitor is off – about 5 % of one core at 1920×1080; every monitor draws its own.
Fixed
- Security: the screen locks as soon as the screensaver starts. The default "password only after 1 minute" meant that after the screensaver started, pressing Enter let anyone onto the desktop without a password. Now the password is required immediately; running sessions get this right with the update (a delay you chose yourself is kept). Locking on suspend is explicitly on.
- A fork bomb in the Terminal no longer brings down the whole desktop: after
:(){ :|:& };:in the Terminal the whole session stopped working – the top bar showed errors, shortcuts failed and nothing could be started, because the Terminal, top bar, window manager and everything they started shared one process limit for the whole user. Now the Terminal runs as a user systemd service and the shell of every tab is in its own scope with a process limit far abovemake -j, browsers, Steam or Electron. A bomb only hits the limit of its own tab; the top bar, Dock, Search, shortcuts and other tabs keep working. A tab that hits the limit prints a red line and sends a "Too many processes" notification, and closing the tab ends all its processes at once. Works afterlux updatewithout logging out or restarting (an already open old Terminal only after all its windows are closed). Verified in a VM with 3 GB RAM: the bomb now stops at 4096 processes in its tab while the session stays untouched. - The Bluetooth window no longer grows in memory: left open for 19.5 hours with headphones connected, it used 1.27 GB of RAM plus 992 MB of swap. Every redraw (BlueZ reports the signal strength of nearby devices several times a second while searching) leaked the device rows because of a reference cycle. Rows are now destroyed, signal-strength and similar updates no longer cause a redraw (about 9× fewer redraws), and after 2 minutes in the background the window stops searching for new devices (searching strains the radio – worse headphone sound, battery). Measured with a fake BlueZ: before 93 → 752 MB in 60 s, now 93 → 96 MB and stable even after 5 minutes. New tests.
- The volume icon in the top bar no longer freezes: the volume notification was sent synchronously – when the notification service did not answer, the whole plugin hung for 25 s on every volume change (and at panel start), the icon could not be opened and volume keys did nothing. Now the notification is sent asynchronously with a 1.5 s limit. A menu that GTK could not open, or that a sound server outage hid, no longer blocks the button permanently. A crash when the panel quits is fixed too. Verified with a fake, unresponsive notification server: before 25.1 s of blocking, now 0 ms.
- Notifications come back by themselves after running out of memory: the earlyoom guard killed the notification service 5× in 2 s and it then stayed down until started by hand (apps waited 25 s for a timeout). All user services had a higher kill score than a 4 GB game, so earlyoom killed dozens of tiny services without freeing memory. Now the small session services (notifications, Xfce settings, power manager, screen lock, keyring, portals, gvfs, dconf, polkit agent) are protected, Steam's web helper and WebKit are preferred for killing, and a stopped notification service restarts within 2 s. New test.
- LuxAI in Agent mode really runs a tool call the model wrote as text: the Flash model sometimes sent a tool call as text instead of through the tool-call channel (typically when writing a large file did not fit into the response limit), and LuxAI showed it as a Markdown answer and did nothing. Now a complete call of an offered tool in the GLM, Hermes/Qwen or Qwen3-Coder text format is turned into a normal call and goes the same way as a native one – safety rules, approval card, denial; the call text is not shown while the answer is being written. A truncated or invalid call is never run: the model is asked once to write the big file in parts, the second time a clear error is shown. The agent now gets up to 8192 response tokens for tool calls (before 4096). Older saved messages with a written-out call are shown as a code block, unfenced code keeps its indentation, answers loaded from history no longer show "Thinking…", and the context menu over your own message is no longer white on white.
- Canon printers with the UFR II driver (e.g. MF4100 over USB) are added with one click: the Canon driver has the printer language after the model name ("MF4100 Series UFRII LT") and LuxOS did not recognise it; it now prefers the driver for the language the printer reports (UFR II LT, not CARPS2). An error while adding now gives the real reason (driver missing / cannot be downloaded) instead of "check that it is turned on".
- Battery graphs show history again even after a day on the charger: upower records only changes and the new version 1.91 returned nothing for
points=0; the graph now takes a week of records and the value valid at the start of the 24-hour window. - Flathub apps appear in Launchpad and the menu right away, not only after logging in again: Flatpak folders are always in
XDG_DATA_DIRS, even when Flatpak is only installed with the first app. - Flathub apps appear in Launchpad and the menu right away even in an already running session and for all users: a new service watches the system-wide Flatpak apps and links their
.desktopfiles and icons into/var/lib/luxos/apps, which every session has inXDG_DATA_DIRS– even one logged in before the update. Works forlux install, the Store and plainflatpak install/update/uninstall; removed apps disappear from the menu.luxwaits (at most 3 s) until the app is in the menu. The same app in two folders is listed only once, and a Launchpad sorted by category re-sorts after an install or removal (a new app is no longer stuck at the end of the grid). - The LuxOS logo in the Terminal no longer stays over
topoutput: runningtopright after the welcome logo left the SIXEL image drawn over its output. Images now belong to the cells under them like in xterm: text overwrites them, clearing a line or the screen hides that part, they scroll into history with the text (also after resizing) and are not drawn over the alternate screen (vim,less,htop). Verified with screenshots and a new test. - Lux Code no longer flickers and streams answers live again: the interface sent the whole screen (~9–12 KB) twice a second even with no change and on every key, and the terminal sometimes showed a half-empty frame. Now the frame is composed in memory and only changed lines are sent in one write using synchronized output (DEC 2026); nothing is written while idle, and typing a character sends ~400 B instead of ~9 KB. The terminal size is read with an ioctl, rendered Markdown is cached and Ctrl+L redraws the screen. Background jobs are fixed too: the TUI froze during a model request and the answer appeared all at once – now text streams in, Esc/Ctrl+C cancels the request and background shells and services really run in the background. The model also gets the current local date, weekday, time and time zone, the system name and version and the working folder with every request.
- Navigation in Maps recalculates the route when you go another way: public transport was never recalculated (just "You are off the route.") and going back along the route did not count as leaving it. Now the opposite direction is detected too and public transport is planned again from your current position – when you leave a walking leg, are more than 150 m from the line in a vehicle, or missed your connection (not on board 90 s after departure: "You missed your connection. Looking for another one…"). The new connection replaces the old one everywhere while "Arrive by" stays, with at most one search per minute. Walking needs 35 m off the route (bike 40 m, car 50 m); parallel streets, GPS jumps of a standing phone and short glitches are ignored. A new car or bike route starts in your direction of travel. Verified by replaying real phone tracks.
- The location arrow in navigation moves smoothly instead of jumping: between fixes its position is predicted from speed and direction (at most 1.5 s), on a route it snaps to the route line, a new fix is blended in within a fraction of a second and the map rotates the shortest way. It draws only while moving – at most 30 frames per second, nothing without new positions.
- Long public transport connections fit into the Maps panel: leg badges wrap onto further lines, long line names are shortened with an ellipsis (full name in a tooltip) and the delay sits next to the line name, so a 280–560 px panel never overflows sideways; the Car/Bike/Walk/Transit buttons shorten in a narrow panel.
- The analog clock screensaver no longer shows leftovers of the password dialog after Esc: the screensaver redraws only the clock square outside the fade, and the screensaver program left the last frame of the dialog underneath – the date, a large time and the lock wallpaper stayed around the clock. Now the screensaver's own last frame is kept and its whole window is exposed, and LuxOS screensavers redraw the whole screen after every expose, after a pause and at least every 5 s. Verified by screen capture: now the whole screen is the screensaver 25–40 ms after the dialog closes; the other clock styles have no leftovers either.
- Maps had no icon in Alt+Tab when the icon theme pointed to a missing file: Maps now uses its installed icon directly in that case.
- The login spinner turns smoothly instead of stuttering: even rotation with a constant arc length at 60 frames per second.
- Login is fast again – the spinner transition delayed the session start by up to 15 s: every spinner redraw generated an event that woke the loop at once, so the spinner was drawn non-stop, the X server ran at 100 % and the window manager and desktop only started after the cover ended (15 s on a real computer). The spinner now draws without these events, at most 30 frames per second and at lower priority (~1 % of a core); the window manager now starts in 280 ms with or without the transition (before 1,700–2,000 ms). The transition also ends within 3 s if no window manager appears, and always within 10 s (instead of 15 s). LightDM starts X with
-noreset(like GDM), so the frame left by the login screen no longer disappears. A test now also measures the time to the window manager with a real session. - Notifications: the close cross is red and without a white background.
- No more black screen after login – the wallpaper with a loading spinner like on macOS: from accepting the password until the desktop is ready, you see the dimmed login wallpaper with a small spinner where the password field was, and then it fades into the desktop. The causes of the black screen (found by capturing hundreds of frames per second): the compositor often did not draw a full-screen window that existed before it started, the cover ended before the desktop had loaded its wallpaper, and on drivers without glamor (QEMU) the gap between the login screen and the cover was black. Now the cover sits in the compositor overlay window, ends only when the desktop really shows the wallpaper and the top bar and Dock are drawn (at most 15 s), and the login screen leaves its last frame on screen. A new test fails on any black frame – the old version had about 100 black frames in every run, the new one none.
- Waking the locked screen without a black frame: after a key press or mouse move, the screen went black for ~0.3 s before the password dialog appeared. The window now keeps the last screensaver frame as background until the dialog is drawn, and the last dialog frame when returning to the screensaver. Verified by screen capture: before ~200 black frames at every wake-up, now none.
- Battery graph in Battery and Power: the "0 % / unknown" record upower writes at every boot is no longer drawn as a discharge, and a computer that was off or asleep breaks the line instead of drawing a long slanted one. A value stays valid until the next change and the graph ends with the current state.
- The phone (LuxOS Companion) now finds the computer – the computer is visible while the Bluetooth settings are open: LuxOS never made Bluetooth discoverable, so the phone did not see the computer at all, while the Bluetooth window misleadingly said "Other devices see this computer as …". Now, like on macOS, the computer is visible while the Bluetooth window is open and Bluetooth is on ("Visible as "jupiter" while this window is open", otherwise "Not visible to other devices"). Closing the window or turning Bluetooth off ends visibility – only if the window turned it on; visibility has a 3-minute limit that the open window renews, so even a crashed window does not leave the computer visible forever. The Phone window has a new Pair Phone… button: the computer is visible for 3 minutes with a countdown and instructions, ending on pairing, Cancel or closing the window. Pairing alone still allows nothing – LuxOS asks on the first connection as before. The Bluetooth window now also asks for pairing without a code and for services of untrusted devices instead of silently allowing them.
- LuxAI no longer crashes when you click an old conversation: clicking a conversation in the sidebar sometimes crashed the app, because opening it rebuilt the conversation list while GTK was still handling the row selection. The conversation now opens after the click has finished; verified by an automated test with real mouse clicks in a virtual screen, which used to crash on the second click.
- Progress of the last step of
sudo lux update: the "Finishing" line (post-install hooks – mkinitcpio, DKMS, icon caches, systemd…) sat at 0 % for a long time and then jumped to 100 %.luxnow works out which hooks the transaction will run and shows "Finishing ███░░ 25 % 3/12 · Updating linux initcpios", correcting the estimate from the libalpm debug log. Pre-transaction hooks (system protection, snapshot) have their own "Preparing" line. In machine mode there is a new phase@@PHASE prepare. - The "Maps with navigation and Weather" icon in the What's New window: there was just a blue square instead of an icon, because the WhiteSur icon theme links that symbolic name to a coloured app icon, which GTK recolours entirely. The window now skips coloured icons under symbolic names and uses the Adwaita icon instead; a new test checks that every What's New icon is really symbolic.
- The Text Editor has its own LuxOS icon again: the editor uses the original LuxOS notes icon in the Dock, Launchpad, menu and Tour, and its window icon is scaled down from a 512 px PNG with a quality filter, so it is sharp in Alt+Tab too.
- Text Editor in the Dock: new users have it in the Dock (after the Terminal); for existing profiles it is added once if missing, so if you remove it later it does not come back.
- What's New in the Dock: while the window was open, the Dock showed the program name "luxos-whats-new" and a blurry icon. The window now has a proper hidden
.desktopfile (translated name in 12 languages) and a sharp 16–256 px icon; a new shared function writes the full icon list including 256 px, used by What's New and Calculator. - The Calculator has an opaque title bar: the window's title bar was fully transparent (the calculator's background gradient showed through); now it is the normal theme bar, light or dark, while the calculator body stays the same. The f(x) button has a subtle background so it is visible in the light appearance too.
1.0.0 "Sirius" – 2026-10-28 (test release, staging)
A test release for installing on real hardware: both the ISO and the updates come from the non-public staging channel; users of 0.9.12 get 1.0 only after the 1.0.1 release.
New
- Stable / staging update channel:
[general] channelin/etc/lux/lux.confis"stable"(default, released versions) or"staging"(pre-release test builds for testers). On staging the LuxOS repositories ([luxos],[luxos-apps],[luxos-drivers],.luxpackages and Store icons) are read fromhttps://luxos.lux-ai.cz/staging/instead of…/repo/; Arch Linux and custom repositories stay the same. It applies everywhere (lux,lux-engine, LuxOS Care, Store). Switch withupdates.channelin/etc/luxos/system.lslandsudo lux system apply, orlux-config set-channel;lux config checkshows the channel. The test ISO (LUXOS_CHANNEL=staging) uses staging in the live and installed system. - LSL 0.10.7 (LuxIR backend 0.4.4): new modules
net(TCP/UDP, multicast),tls(TLS 1.2/1.3, custom certificates, pinned keys, ALPN),crypto(EC P-256, ECDSA, SHA-2, HMAC) andmdns(Avahi); 13 bugs found while rewriting LuxAI fixed; newlsl-testcommand. - LuxAI rewritten in LSL: faster start, less memory (
luxai2.0.0): LuxAI is now a native LSL program instead of Python, with the same window, behaviour, permission rules and administrator mode. The window appears in ~340 ms instead of ~515 ms and uses 96 MB instead of 118 MB RSS after start. Settings, sign-in and chat history carry over unchanged, and the administrator helpers keep their paths, so an enabled "no password" mode still applies. New: calendar – LuxAI can read LuxOS Calendar events (in Chat and Agent) and, in Agent, add, change and delete them after you confirm on a card;luxai --remote-sessionfor LuxOS Companion; sharp window icons at 16–256 px. LuxAI no longer needs Python or PyGObject. - Clicking a notification shows its full text (modified
xfce4-notifydin[luxos]): a click no longer closes the notification but expands it – full title, text (shortened to 3 lines) and action buttons; a second click runs the default action (e.g. opens the message) and closes it. Notifications with nothing to expand run the default action right away. A small × in the top-left corner appears on hover to close it (as on macOS); hovering still pauses the countdown, and right/middle click closes it as before. - Sorting in Launchpad: buttons below the grid for Alphabetical, Recently used, Most used (default, as before) and By category (Internet, Office, Graphics, Multimedia, Development…, alphabetical within each), also
Alt+1..Alt+4. The choice is remembered per user (~/.config/luxos/launchpad-sort). App launches are counted only on the computer (~/.local/share/luxos/launchpad-usage.json, app IDs, counts and last launch time, never sent anywhere). Changing the order re-sorts the tiles in the open window without closing or flickering, and opening Launchpad stays as fast as before. - Sound switches to a connected monitor by itself (HDMI/DisplayPort), as well as to USB and Bluetooth devices, and switches back when unplugged. Previously the HDMI port only appeared on a sound card that stayed in its analog profile, so nothing switched.
luxos-hubnow watches card changes (pactl subscribe, no polling), switches the card to the best HDMI profile (keeping the microphone), sets the default output and moves playing streams. A manual choice wins: if you pick another output after an automatic switch, nothing is reverted on unplug. Devices connected at login are not switched. - Phone – LuxOS Companion (
luxos-companion, new package in the base install): the computer side of the LuxOS Companion 0.2 Android app over Bluetooth (RFCOMM with mandatory authentication and authorisation). Pair the phone in Bluetooth settings first (LuxOS never makes itself visible by itself); on the first connection LuxOS asks "Allow phone … to connect to LuxOS?" – pairing alone grants nothing. Settings › Phone shows the connection, allowed phones with Remove, and switches for sharing the phone's location with Maps, LuxAI requests from the phone and saving notes to Calendar. Live location in Maps from the phone's GPS (only with consent, valid at most 15 s, greyed out when stale). LuxAI from the phone vialuxai --remote-session(streamed answers, Stop, text never goes to a shell, action confirmations stay on the computer). Notes to Calendar as all-day or 30-minute events in the phone's time zone, written safely without touching the rest ofevents.icsand never duplicated; Calendar now also picks up events added by other programs before saving. D-Bus interfacecz.luxos.Companion1for other apps. Documentationcompanion.md. - LuxDrop with the LuxOS Companion 0.3 Android app (
luxdrop): the app's LuxDrop tab uses the native LuxDrop protocol (TLS 1.3, pinned keys, verification code) instead of LocalSend mode. The phone sends a file to the computer's address after you paste the key fingerprint fromluxdrop id(or Settings › Security) and resumes interrupted transfers; in receive mode (10 minutes) the phone shows up in LuxDrop among nearby devices and accepts up to 16 files and 1 GiB. The LuxDrop receiver now always picks AES-256-GCM by its own order, which the app requires. Verified against the app in both directions. Documentationluxdrop.mdandcompanion.md. - LuxDrop understands LuxOS Companion 0.3.2 (
luxdrop,luxos-i18n): when the phone declines an offer, LuxDrop now says why in your language based on the error code ("Too many files or too much data for the recipient", "Not enough disk space", "The recipient did not answer in time", "Data was damaged on the way. Nothing was saved" …) instead of the text sent by the other side, which is now only a shortened detail. This applies to all transfer errors in the window and on the command line. With Python 3.15 LuxDrop also offers ChaCha20-Poly1305 as a sender, so phones without hardware AES use the faster cipher. Verified in 33 scenarios against the app. - Joining a company network – Windows domain (Active Directory) and Samba AD (
luxos-domain,lux domain): LuxOS joins an existing domain without any change on the domain side. Settings › Company Network (domain pre-filled from the network, Find shows e.g. "Microsoft Active Directory – firma.local – 2 controllers", admin name and password, step-by-step progress), a new Organization step in the installer (graphical, text and unattended withDOMAIN=,DOMAIN_USER=,DOMAIN_PASSWORD=,OU=) and in the Setup Assistant (OEM). The login screen gets Other user… (acceptingjan,jan@firma.localandFIRMA\jan). Offline login with a cached password for 30 days, changing an expired password right at login, short user names, domain administrators withsudoand LuxOS admin dialogs (for 7 days without contact to the domain), "Allow/Deny log on locally" GPOs,lux domain login allow GROUP, company shares and Windows print servers via Kerberos without another password, Kerberos for company websites in Firefox. The domain admin password is never stored. A system snapshot is taken before joining and everything is rolled back on error; leaving restores the original login setup and keeps home folders. Built on SSSD, Kerberos (KCM),adcliandrealmd(verified copies in[luxos]). Documentationdomain.md,man luxos-domain. - Organization policies in
lux system(/etc/luxos/system.d/NN-name.lsl): LSL fragments from an organization (domain, later LuxOS Directory) are merged with your own/etc/luxos/system.lslin name order. Your file wins, except for entries withconfig.mkForce, which are locked – a different value is an error naming the organization and policy;config.mkDefaultis only a recommendation. Lists (packages, services, ports…) are combined.lux system diffshows which policy each change comes from,lux system show --originlists the origin of every value andlux system locksthe locked entries. Anything that disappears from a policy stays as it is – nothing is uninstalled by itself. Newdomainkey (administrators, who may log in, offline days). - Our own LuxOS Terminal with images (
luxos-terminal, replaces xfce4-terminal): a small C program (GTK3 + VTE) in macOS style – tabs (Ctrl+Shift+T, shown from two tabs on, a + button in the title bar), new tabs and windows in the same folder, a dark profile with a black, slightly transparent background (light or follow-system optional), search (Ctrl+Shift+F), Ctrl+click links, font size Ctrl+plus/minus/0, Ctrl+Shift+C/V, tab titles by folder, a question before closing a running program, remembered window size. It shows SIXEL images (img2sixel, chafa, timg…), and fastfetch shows the real LuxOS logo as an image; LuxOS ships its ownvte3with SIXEL restored. Faster and lighter than xfce4-terminal: a window in 175 ms instead of 203 ms, another window in 53 ms instead of 108 ms. Super+T, Ctrl+Alt+T, Dock, "Open Terminal Here" in Files andTerminal=trueapps open the new Terminal. Settings~/.config/luxos/terminal.conf, documentationterminal.md. - Our own LuxOS Text Editor (
luxos-text, replaces Mousepad): a small C program (GTK3 + GtkSourceView 4) in macOS style – a folder tree sidebar (F9, + for a new file or folder, refreshes by itself), file name, language picker and an (i) document info popover in the title bar, a document outline (Markdown headings, functions and classes) with previous/next arrows, line numbers, syntax highlighting including LSL, wrapping, invisible characters and a status bar with line/character/word counts, position, encoding and line endings. Encodings are detected on open (UTF-8 with or without BOM, UTF-16, Windows-1250, ISO 8859-2, Windows-1252, Windows-1251) and kept on save together with line endings. Find and replace (Ctrl+F, Ctrl+H, regular expressions, "2 of 7"), go to line (Ctrl+L), tabs, recent files, drag and drop, a warning when another program changes the file, and a prompt for unsaved changes. Faster and lighter than Mousepad (a small file opens in 164 ms instead of 214 ms with 19 instead of 27 MB). It is the default app for text and source files; existing profiles switch from Mousepad once after login, Mousepad is removed bylux update, and themousepadcommand still opens Text Editor. Settings~/.config/luxos/text-editor.conf, documentationtext-editor.md. - System snapshots before every update and rollback from the boot menu (
luxos-care): before every package change (lux, Software Update, Store) a read-only Btrfs snapshot of the system is taken (the last 5 plus the last one with the previous kernel, 2 when space is low;SNAPSHOT_KEEP,SNAPSHOTS=noin/etc/luxos/care.conf). The kernel and initramfs the system boots with are saved alongside, so a snapshot still boots after a kernel update. The boot menu (hold Space, Esc on GRUB) offers "LuxOS (before update of …)": the snapshot boots read-only with a temporary in-memory layer, and after login a notification offers Keep This Version. Permanently:lux rollback, pluslux snapshotsandlux snapshot; the current system stays as a "before rollback" snapshot, nothing is deleted, and automatic updates then wait 3 days. - The whole system in one file (
lux system, likeconfiguration.nixin NixOS):/etc/luxos/system.lslin LSL describes the wanted packages, Flathub apps, services, users and groups (no passwords, optionallypassword_hash), hostname, language, time zone, keyboard layout, LuxOS Care mode, Lux Guard, firewall and kernel parameters.lux system show/initcreates the file from the current computer,checkvalidates it,diffshows changes (also--json), andapplyfirst takes a system snapshot, shows the difference, asks (nothing changes without-y) and applies;lux rollbackundoes it. Only what is in the file is managed; packages never listed are removed only with"remove_unlisted": True(never the LuxOS base, kernels or essential services). The file is evaluated by a sandboxedlsl config(no files, network or programs, with a time limit). Errors are clear, with the location and advice, in all languages. Example/usr/share/doc/lux/system.lsl.example, documentationman luxos-system. - All important settings in
/etc/luxos/system.lslright from installation (lux system): the installer creates the file at the end of installation (OEM after the Setup Assistant), and existing systems get it once whenluxis updated, if it does not exist yet (it is never overwritten or recreated). Right afterwardslux system diffreports that the system matches. The file is written for beginners, in sections with explanatory comments in the system language. No passwords – neither user password hashes nor Wi‑Fi/VPN passwords. Newly managed: network connections (network.connectionsvianmcli, with extra confirmation before touching the connection in use), printers (printersvialpadmin), power (power: lid, idle suspend, power profile), the boot menu (boot: timeout and default entry), the process scheduler (kernel.scheduler), drivers (drivers), regional formats (formats) and the text console (console), lockout after failed passwords (security.faillock, LuxOS default 20 failures / 30 s → 1 minute), defaults for new users (new_users: appearance, wallpaper, Dock apps, default browser, editor and mail, screen lock) and repositories (repos, check only).lux system fixbrings the system back to the state in the file and is also in LuxOS Recovery ("Repair Settings"). Documentationman luxos-system. - LuxOS Recovery in the boot menu (it boots from the newest snapshot, so it works even after a broken update): disk check (read-only btrfs scrub and check, fsck of the EFI/boot partition; repair only after confirmation, never
btrfs check --repair), rollback to a snapshot and reinstalling LuxOS while keeping /home and accounts (same apps, accounts and passwords, language, keyboard, Wi‑Fi, disk encryption and enabled services are carried over; the original system stays as a snapshot until the install succeeds). Commandsluxos-care disk-check,luxos-care reinstall. - System protection (
luxos-care, a first step towards an "indestructible" system like macOS's Signed System Volume): system files in/usrare read-only and may only be changed by package changes vialux, Software Update, Store orlux system apply–/usris unlocked just before the transaction and locked again right after. Updates still apply immediately without a reboot;/etc,/var,/home,/optand/usr/localstay writable. Protection never blocks booting (kernel parameterluxos.protect=0disables it for one boot). New installations have it on (PROTECT=yesin/etc/luxos/care.conf); older ones can turn it on in Software Update › System Protection or withluxos-care protect enable. System file checkluxos-care verifycompares all package files in/usrand/optwith the package database and finds changed or missing files;--repairreinstalls the affected packages from signed repositories. It runs weekly in the background at the lowest priority, only on AC power, and notifies only when something is found (--quickchecks ~225,000 files in 12 s). New keyscare.protectandcare.verifyinlux system. Documentationsystem-protection.mdandman luxos-care. - Reset app settings (Settings,
luxos-app-reset): a list of apps with settings in~/.config,~/.local/share,~/.cache, Flatpak and~/.mozilla; resetting an app moves its settings to~/.local/share/luxos/app-settings-backups/<date>-<app>(nothing is deleted, the backup can be restored). The keyring, LuxAI account, desktop and other sensitive folders are not offered. - Backups (
luxos-backup, Backups app): automatic incremental backups of your home folder to an external (USB) or network drive (SFTP, SMB share) every hour, only on AC power (paused on battery, in Battery Saver and on metered connections for network drives). Plugging in a new drive offers "Use this disk for backups?"; FAT/exFAT/NTFS drives can be prepared (btrfs with zstd), optionally encrypted (LUKS2, password in the keyring). Unchanged files take no extra space. Keeps everything for 24 h, one backup a day for a month and weekly ones beyond; a full disk deletes the oldest backups with a notice. Restore from a timeline, browse folders, restore to the original place or elsewhere – an existing file is never overwritten; "Restore All" works on a new system too (luxos-backup restore --all --source DISK, also from the installer and LuxOS Recovery). Documentationman luxos-backup. - Profile picture (
luxos-profile-picture, in Settings, or Change Photo in LuxAI Account): a photo from a file or webcam, cropped to a circle (drag to move, wheel or slider to zoom). It shows on the login and lock screens, in the LuxOS menu, Control Center and LuxAI Account; without a photo a circle with your initial remains. Saved to~/.faceand via AccountsService. - Manage your LuxAI account right in LuxOS (LuxAI Account app, replacing the lux-ai.cz/settings page): pages Overview (Flash and Lite usage with percentages and reset date), Profile (change user name), Password & Security (change password with a strength meter – other devices are signed out, this computer stays signed in), Preferences (AI answer style, light website mode) and Privacy & Data (export profile, settings and web chat history to JSON without the token, terms, account deletion request with strong confirmation). What the server does not allow from the app gets an Open on Web button; e-mail changes go through support.
- Transition after login – after authentication the login screen leaves only the wallpaper, which hides the desktop being assembled; once the desktop, bar and Dock are drawn, it fades into the finished desktop in ~0.3 s (
luxos-session-cover --login). It never delays login (at most 5 s); no animation in Battery Saver or with animations off. - Magnifier in the top bar before Control Center opens Search (like
Super+Space); existing profiles get it once after login (if you remove it, it does not come back). - Preparing for someone else (OEM) – a shop or IT installs LuxOS without a personal account (installer "Prepare for Another Person (OEM)", unattended
OEM=1). On first boot the owner is greeted by a full-screen Setup Assistant like on a new Mac: language, keyboard, Wi‑Fi, time zone, account (name, password, optional photo), LuxAI, disk password and maintenance; then they are logged straight into the new account and the LuxOS Tour starts. An unfinished assistant survives a power cut (it restarts on the same page). - Seal for the customer – optionally the computer is first prepared in a temporary
oemaccount (apps, hardware test), then a desktop button orluxos-oem sealdeletes logs, caches, history and saved Wi‑Fi, creates a newmachine-idand SSH keys, and theoemaccount disappears on the next boot. - Encrypted disk with OEM – until first boot the disk is unlocked with a temporary key (no password); the owner chooses the disk password in the assistant (default = account password), and the temporary key is then removed. The process is safe against a power cut at any step.
- Monitor arrangement like on macOS (Displays › Arrangement): monitors as scaled rectangles that snap to each other's edges when dragged (no gaps or overlaps), a white bar marks the main monitor with the top bar and Dock (drag it or pick Main Display), and a Mirror Displays switch. Every change has a 15 s confirmation like resolution changes. The layout is saved per set of monitors (connector + EDID) and restored after login and when the same monitors are reconnected.
- Another computer's files next to yours (
luxdrop, Connect to Computer app,luxdrop connect): a Files window split into your home folder and the shared folders of another LuxOS computer on the network, with drag and drop between them; the connected computer is also in the Files sidebar. On the other computer, LuxDrop › Settings › Share Folders (off by default, then only the Public folder; never hidden folders; the whole home folder only after confirmation). Every new computer must be allowed by the owner (Allow Once / Always Allow / Decline, with the same 6-digit code as LuxDrop on first contact); access is read-only unless changes are requested and allowed. Transfers use a sandboxed SFTP server tunnelled over LuxDrop's TLS 1.3 – no sshd and no admin password. Removing access ends the connection; a vanished computer is detected within ~45 s without freezing. TCP port 47924,luxdrop share,luxdrop disconnect. - Network management (
luxos-router, Router): network details (Wi‑Fi, IP, gateway, DNS, public IP on request), the router's web admin right in the app (HTTP and HTTPS, only home-network addresses – other links open in the browser; the router's own certificate only after confirmation; no passwords stored), devices on the network with their vendor by MAC address, and quick tests: ping the router and the internet, DNS and a download speed estimate. - The lock screen looks like the login screen: moving the mouse or pressing a key no longer shows the Xfce dialog but the same look as login – desktop wallpaper, date and large clock, round avatar, name, a frosted password field with an arrow, messages (Caps Lock, wrong password, temporarily locked account, fingerprint), keyboard layout, network and battery, and Switch User (with more accounts), Sleep, Restart and Shut Down at the bottom. The "Desktop wallpaper and clock" screensaver looks like the idle login screen, so the transition is smooth without a black screen. Lock security stays in
xfce4-screensaver(modified package in[luxos]). - A CPU load graph can be added to the top bar (right-click the bar › Panel › Add New Items › CPU Graph); it is not in the default bar.
- Weather (
luxos-weather, new package in the base install): current weather, 24-hour and 7-day forecast, several saved places and city search, a background matching the sky and custom icons. Data from Open-Meteo (no key), cached for 30 minutes, with the last forecast shown offline. The first place comes from the time zone; approximate location by IP address (ipinfo.io) only after confirmation. Units follow the language (°C and km/h, °F and mph in the USA) and can be switched. The calendar under the clock shows the weather for the selected place below today (e.g. "13° Partly cloudy · Prague"). - Maps (
luxos-maps, new package in the base install): smooth OpenStreetMap maps (drag with inertia, zoom to the pointer with wheel/touchpad, double-click, keys), place and address search (Nominatim), routes by car, bike and on foot with time, distance and turn list (FOSSGIS/OSRM as on openstreetmap.org), favourite places, "What's here?" and more on right-click, copying coordinates andgeo:links, openinggeo:links from other apps. My location only after one-time consent (GeoClue with nearby Wi‑Fi via BeaconDB, otherwise roughly by IP), with an accuracy circle. Dark map following the system appearance. Follows OSM usage rules (own User-Agent, limited downloads, cache up to 300 MB, at most 1 query/s); offline it shows previously viewed places; "© OpenStreetMap contributors" is always visible. GTK3 + cairo: the window is drawn in 0.45 s with 44 MB. Public transport (Transitous open data): departing now, at a set time or arriving by – up to 3 connections with times, transfers, coloured line badges, platforms and real-time delays. Departure boards with the next 20 departures or arrivals refreshed every minute. Nearby: restaurants, cafés, shops, fuel and charging stations, parking, pharmacies, hospitals, hotels, sights, stops, toilets and playgrounds from OpenStreetMap (Overpass). For LuxAI and scripts,luxos-maps --json search|reverse|route|transit-route|timetable|nearby|where-am-i|openand route preview images withluxos-maps --render-preview. Documentationmaps.md. - Navigation in Maps (
luxos-maps,luxos-i18n): a Navigate button for car, bike and walking routes and for a selected transit connection. A large banner at the top shows the next manoeuvre's icon, distance, instruction and street (translated), plus the one after; at the bottom the remaining time, distance, arrival time, a compass and End. The map follows your live position – phone GPS via LuxOS Companion first, otherwise GeoClue – with an arrow in the direction of travel, heading up or north up; moving the map stops following and shows Re-centre. Off route (more than 50 m) the route is recalculated from your position (at most every 15 s, considerate to the OSRM server); "You have arrived" at the destination; transit gets live Walk/Board/Get off steps with platforms and times. The screen does not blank or lock while navigating and is always released afterwards. Optional voice guidance (withspeech-dispatcherorespeak-ng, off by default). The Maps sidebar can be resized by dragging (280–560 px) and its width is remembered. Documentationmaps-navigation.md. - Wi‑Fi QR code (
luxos-wifi-qr): Control Center › "Share Wi‑Fi with QR Code…" shows the connected network as a QR code for a phone (password from NetworkManager, for system-wide networks after the admin password; the image can be copied). Without a connection, "Connect to Wi‑Fi with QR Code…" lets the Camera scan a network's QR code and connect after confirmation (luxos-camera --scan-wifi). QR codes are drawn and read byzxing-cpp(~2 MB). - New look of the LuxOS menu (logo in the top bar, modified
xfce4-whiskermenu-pluginin[luxos]): a translucent rounded panel like the other menus (light and dark), a round profile photo (or initial) with your name and a Log Out… button at the top, then a rounded "Search apps…" field. Favourite apps in taller rows on the left, categories with arrows on the right, the selected row softly blue and rounded. At the bottom Lock Screen and round labelled buttons Restart, Sleep and Shut Down (red). Chromium apps no longer have their own "Chromium Apps" category and live in Internet. Existing profiles get the new layout once after login (favourites are kept); the menu opens as fast as before. - New format of
/etc/lux/lux.conf(TOML) (lux-engine,lux): the package manager configuration has tables[general],[downloads],[security],[packages],[paths],[repo.NAME]and[include]withkey = valuelines (quoted text,true/false, lists such ashold = ["linux"]).luxreads it directly. Errors report file and line; an unknown or misplaced key is only a warning inlux config checkwith a hint ("it belongs to [downloads]"). The olderkey valueformat from LuxOS 0.9 is still read; updatinglux-engineconverts/etc/lux/lux.confandconf.d/*.confonce (same values, comments kept, original saved aslux.conf.old-format), manually withsudo lux config migrate(--dry-runshows the result). The installer, live ISO, sandbox andlux-config enable-repowrite the new format; other tools uselux_config.load()(lux-config json). - Configuration backups are named after lux (
lux-engine): a new version of a modified config file from an update is now*.luxnewand a saved modified file of a removed package*.luxsave(instead of pacman's*.pacnew/*.pacsave). Updatinglux-enginerenames existing*.pacnew,*.pacsaveand*.pacorigfiles in/etconce (never overwriting, logged in/var/log/lux.log).lux configs,lux doctor,lux update, LuxOS Care and Software Update recognise both old and new names. - Faster response and start – a new process scheduler scx_lavd (sched_ext,
scx-schedspackage): under load, windows, input, audio and games get the CPU first.luxos-scheduler.servicestarts it only after the login screen appears (boot never waits for it); without sched_ext support, on error or repeated crashes the normal kernel scheduler (EEVDF) silently stays. Switch withsudo luxos-care scheduler default|lavd,SCHEDULER=in/etc/luxos/scheduler.conforkernel.schedulerinsystem.lsl. Thelinux-luxoskernel hasHZ=1000, full preemption and sched_ext. The boot menu no longer waits on GRUB (BIOS) either:GRUB_TIMEOUT=0with a hidden menu (hold Shift or press Esc), older installations switch once if they still have the LuxOS default; the previous kernel, snapshots and LuxOS Recovery stay in the menu. The splash now runs in parallel with network start, so the login screen appears about 0.3 s earlier. - A stronger Safe – also for signing keys (
luxos-safe,luxos-backup): new Safes and every password change use scrypt 2^18 (256 MiB, unlock ~0.7 s instead of 0.18 s), making password guessing from a stolen disk 4× more expensive; existing Safes offer Strengthen Protection… (same password, only the key wrapping changes). New passwords need at least 12 characters, show a strength meter and reject common words and patterns; old passwords still unlock and attempts are never locked out. Recovery key: shown once after creation to write down on paper (cannot be selected or copied), available again via Recovery Key… with the password; Forgot Password… uses it to set a new password. An unlocked Safe is mountednosuid,nodev,noexec, gocryptfs runs without core dumps andgpg-agentfor GnuPG folders in the Safe is stopped before locking.luxos-safe checkshows the protection status. Backups now include the encrypted Safe (encrypted data only, never the unlocked contents)../build.shlooks for the repository signing key in the Safe first. Documentationsafe.md: threat model and how to move GnuPG and Android keystore keys into the Safe.
Changed
- Installer: no pacman or Arch in Details – the output of inherited tools (keyring setup, optional dependency lists) is no longer shown in the window, and tool and path names are LuxOS ones (
lux,/etc/lux). The full log (/var/log/luxos-install.log, Save Log) stays unchanged for troubleshooting; package names are unchanged. - More thorough checks of community (AUR) packages (
lux): the build script check now has two layers. (1) Fixed offline rules (no AI) scan all repository files and now also catch downloads straight into$pkgdiror/tmpwithchmod +x, obfuscation viarev/eval, changes to/etc/hosts,resolv.confandld.so.preload, persistence (autostart, user services), setuid, disabling the firewall or security services, replacing system programs, data exfiltration and key/cookie theft, crypto mining, sources from bare IPs or look-alike domains and missing checksums for remote downloads. (2) The review is done by two independent LuxAI models – Lite and Flash; the stricter answer wins and "safe" only counts when both agree. File contents are passed to the model as data and instructions hidden in them are ignored (prompt-injection resistance). Every verdict comes with a reason. On an evaluation corpus (22 real AUR packages + 27 malicious variants) the check flagged all 27 malicious ones as dangerous (0 as safe) and no real package as dangerous. - No "waves" wallpapers (
luxos-waves-dark,luxos-waves-light): only the new wallpapers remain in LuxOS 1.0. Anyone who had waves set gets Flow in the same mode (dark or light) after login.
Fixed
- LuxOS Companion: the phone did not connect ("read failed, socket might closed"): the Bluetooth service record (SDP) had no RFCOMM channel, so Android could not find it. The service now has fixed channel 22 and its own SDP record; verified with a real phone.
- No more "Failed to start BAMF" errors in the system log on logout and re-login: the Dock's
bamfdaemonservice starts only when an X server is available. - "Install LuxOS" no longer appears in Launchpad after an OEM install: the installer package stays for the Setup Assistant, but its launcher is hidden on the installed system.
luxos-backup restore/listoutside the desktop session (ssh, another console): when mounting the backup disk needs the admin password, it asks in the terminal, otherwise it clearly points to the Backups window or a desktop terminal (previously a D-Bus "NotAuthorizedCanObtain" error).- Safe: closing the admin password dialog while creating a Safe now says "Authentication was cancelled. Nothing was changed." instead of "The Safe folder could not be created."
- Launchpad and Search without black corners with the compositor on (
rofifrom[luxos]): rofi took the screen's last 32-bit visual, which on X servers with GLX (e.g. VMs with llvmpipe) may lack alpha, so rounded corners were black. It now picks a visual with alpha via XRender. - OEM: the first login after the Setup Assistant really is in the language the owner chose (
luxos-oem): the account language is written to AccountsService when the account is created; previously the first session was in English. - Community (AUR) packages with signed sources build in the sandbox (
luxos-sandbox): authors' keys fromvalidpgpkeys(e.g.neofetch) are fetched into the sandbox user's keyring before building (the host is untouched, like yay/paru); previously the build failed with "unknown public key … One or more PGP signatures could not be verified". - LuxDrop: "Show in Folder" in the received-file notification did nothing when the receive folder was the default. It now opens Files with the received file selected.
- All apps and the top bar crashed at once after running out of memory: earlyoom killed the accessibility bus (at-spi), and when it restarted all running GTK apps quit. earlyoom now leaves it alone (
luxos-tweaks). - LuxDrop closes the connection right after declining or finishing a receive: the receiver closed only the raw socket, not the encrypted connection, so a sender waiting for the end (the Android app) hung after "Decline" until it timed out.
- Command help in the system language instead of developer notes:
luxos-care -hon an English (or other) system printed a Czech developer docstring. Help and usage errors now have an English source translated into all 12 LuxOS languages forluxos-care,luxos-backup,lux domain,luxos-safe,luxos-companion,luxos-app-reset,luxos-scan,luxos-unfreeze,luxos-hwdetect,luxos-install,luxos-oem,luxos-appearance,luxos-brightness,luxos-datasaver,luxos-displays,luxos-powersaver,luxos-splash,luxos-network-login,luxos-portal-check,luxos-terminal,luxos-textandluxdrop(including argparse texts).luxos-install --helpno longer asks for the admin password andlux --helphas aligned columns. The browser page after connecting a LuxAI account is in the system language (previously Czech only). A new test checks the help of all commands in English, Czech and German. - Login transition without a black screen in QEMU and on drivers without glamor: the X server there does not keep the last login-screen frame, so
luxos-session-cover --loginshowed ~2 s of black. The login screen now also saves the frame to the user's LightDM folder and the transition uses it when the server's frame is black; otherwise at least a blurred wallpaper, never black. - LuxOS Companion asks only once: an approved phone is marked as trusted in BlueZ (Remove in the Phone window revokes it) and the LuxOS Bluetooth agent no longer shows its own "Allow … to connect?" prompt for the Companion service. Previously two prompts could appear.
- Live system: no partition icons of the target disk on the desktop after installation – the live desktop shows only removable (USB) drives, not internal ones (they stay in Files). The installed system is unchanged.
- LuxOS Recovery no longer reports a "dirty" EFI partition after a hard power-off: a mounted FAT partition always has the kernel's "dirty" flag, which the disk check no longer treats as an error (real errors are still reported). The installer always gives the EFI partition a boot-time check in
/etc/fstab(pass 2), sosystemd-fscksilently clears the flag after a power cut. lux removekeeps modified config files as*.luxsave, as documented (previously it deleted them likepacman -Rns);-n/--nosavedeletes them too.- Notifications no longer cover open top-bar windows: new notifications used to appear over Control Center, Calendar, the LuxOS menu, bar menus, Launchpad and Search. A notification that would cover such a window now waits hidden (countdown paused) and appears once it closes; otherwise notifications stay above windows. Works for rofi and panel menus too, without D-Bus or polling.
- Sliders in the top-bar sound menu: the second slider was microphone sensitivity – without a microphone even the output's "Monitor" – so it changed nothing audible and looked broken. The sliders now have labels "Output: <device>" and "Input: <microphone>", and without a microphone the input slider is hidden. The Sound slider in Control Center now unmutes muted audio when moved.
- Launchpad and Search without black corners without a compositor (disabled, VM without 3D acceleration): window transparency is not shown without a compositor, so the rounded corners were black; rofi from
[luxos]now uses a screenshot of what is under the window as the background. - Sharp icons in Alt+Tab even for apps that set their icon again (e.g. Bluetooth): the large icon is restored on every window activation, not just the first (GTK later replaced it with a small 48 px one that Alt+Tab stretched).
- Terminal command history is no longer lost – every command is written to
~/.lsh_historyimmediately, not when the terminal closes (with many windows, a crash or logout most commands were lost); with ble.sh history is shared between terminals. - Notifications move up after closing one – a closed notification no longer leaves a gap; the rest move to the screen edge.
- Lux Guard warns about the same file only once, even with several copies (by content, not path), and restarts in its new version after an update (previously the old one ran until logout).
- Lux Guard warnings disappear by themselves (after 10 s instead of a critical notification that stayed until closed) and do not go into the notification history; the same file is reported only once (again only after it changes). Details remain in
luxos-guard log. - Captive portal sign-in (train Wi‑Fi, hotel) even when the network's DNS does not answer: the portal check now runs for 2 minutes instead of 15 s, also tries the network gateway and public DNS and finally the last known check address; every result is in the system log (
journalctl -t luxos-portal-check). Manual Sign In to Network… in Control Center under Wi‑Fi when the network has no internet.luxos-hubrestarts into its new version after an update and the session restarts it if killed – fixes apply right afterlux update. - Alt+Tab tells windows of the same app apart: instead of identical icons it shows a preview of each window's content (with the app icon), and the selected window is raised so you can see all of it – for example which terminal is which.
- Frozen desktop (the mouse moves but clicks and typing do nothing): from a console (Ctrl+Alt+F3)
luxos-unfreezesaves a report about the display server, window manager, memory and processes and restarts the window manager and bar while open apps keep running. When the display server or window manager does not respond for 30 s, LuxOS saves the report by itself (~/.local/share/luxos/freeze-reports). - Screenshot: with the toolbar open it can again be closed with Esc and captured with Enter; other keys keep going to apps (the toolbar does not grab the keyboard and the screen is not frozen, so you can keep opening and clicking things).
- Screenshot opens instantly and stays on top: rewritten from Python to LSL; the toolbar, selection and preview are prepared in the
luxos-hubsession process, so after Print / Shift+Super+5 the toolbar appears in ~5 ms (previously ~0.4 s). When another window activates or opens, the toolbar, selection and preview no longer disappear behind it. Esc reliably closes the toolbar, selection, timer countdown and preview even when another app has the keyboard; while recording, Esc stays with apps and recording stops with the Stop button. Newluxos-screenshot --closeswitch. - Lux Guard and Python venv: an empty downloaded file (e.g. a failed script download) is no longer flagged, and empty
__init__.pyfiles in a venv are not treated as its "copies" –python -m venvand pip inside it work without prompts or the Sandbox. - Installer: the Programming set also includes
vim(next toneovim). - Captive portal sign-in even with Tailscale/VPN DNS (e.g. a school guest network): when system DNS did not work behind the portal, NetworkManager only reported "limited connectivity" and the sign-in window never opened. The new
luxos-portal-checkasks the network's own DNS server (from DHCP) directly and detects the portal redirect; the sign-in window gets both the portal address and IP. - Workspace switcher (if you add it to the bar) shows workspace numbers in bar colours with the active one in blue, instead of grey blocks with thumbnails; thumbnails can be enabled in its settings and then have a transparent background. Workspaces with default names "Workspace N" are named by number.
0.9.12 "Polaris" – 2026-10-26 (beta)
New ISO: ISOs 0.9.7–0.9.11 failed on computers with DKMS drivers (NVIDIA, Broadcom) with "target not found: linux-luxos-headers" – the kernel headers are back on the ISO.
Fixes
- The Terminal no longer freezes – the prompt (starship) has a time limit and a fallback prompt; ssh/sshfs detects a dead connection within ~45 s (
/etc/ssh/ssh_config.d/50-luxos-keepalive.conf). Before, a disconnected sshfs folder in the home folder hung every new terminal (no prompt, no Ctrl+C). - Lux Code no longer freezes with a network folder in the working directory: the change snapshot before a command (also
background_shell) and the toolslist_files,find_files,search_text,directory_treedo not cross into other mounts (sshfs), and the snapshot has a time limit. - A multi-line command pasted into the terminal runs on Enter (an unfinished block such as
ifwithoutfistill adds a line). - Sharp icons in Alt+Tab – GTK3 sends only a 48 px window icon for SVG-only icons; LuxOS adds a 128/192 px icon from the theme to the window (Files, Drivers, Setup Assistant, Battery…).
- Brightness via the scroll wheel shows a single indicator, not a new one under each step.
- Battery saver no longer turns off GTK animations – that stopped progress spinners (the Store looked stuck while checking for updates).
- Notifications: no message for every network connect/disconnect; "No internet" only after 60 s and only as a transient notification; Power Manager error "Action suspend already in progress" after closing the lid (Vault did not release its sleep inhibitor).
- lux: an installation error also prints the first lines of the real cause; a 404 from a mirror is reported as an outdated package list ("run lux update first") instead of advice to check the internet. Interactive
lux: long descriptions no longer scroll sideways, the preview has no technical fields. - Installer: closing the window asks first (not possible during installation); 5 download attempts; a package missing from the medium is reported directly instead of "check your internet"; the default keyboard is US (the local layout is added as the second one); LuxAI sign-in right after connecting to Wi‑Fi is retried when the connection is not up yet, and a wrong clock has its own message.
0.9.11 "Polaris" – 2026-10-24 (beta)
New
- LuxAI searches the web (
web_search,web_fetch) in all modes: search via the LuxAI server, otherwise DuckDuckGo; only public addresses are fetched (no home network or localhost, even after a redirect), at most 2 MB. Web content is marked as untrusted data; once it is in the conversation, every command in Agent mode needs confirmation (even in administrator mode), and addresses that neither the user wrote nor the search returned open only after confirmation. - LuxAI: LaTeX formulas are rendered (fractions, sums, integrals, subscripts, Greek letters), code gets syntax highlighting (Python, LSL, Bash, JS, C/C++ and more), text can be copied (Ctrl+C, a Copy button on answers and code blocks).
- Manual pages from the LuxOS documentation:
man luxos,man lux.conf,man lsl,man 7 lsl,man lslc,man luxos-sandbox,luxos-safe,luxos-guard,luxos-care,luxdrop. - Notification history – the bell in the top bar keeps the last 100 notifications (time change, Calendar, LuxOS Care…); volume and brightness are not stored.
- Installer: bigger Everyday use set (VLC and codecs, KeePassXC, PDF Arranger, Disks, Transmission, Office-compatible fonts) and Programming set (openssh, curl, wget, rsync, clang, cmake, gdb, Go, Rust, Podman, neovim, tmux, ripgrep, fzf, …).
Fixes
- Brightness by scrolling on the battery icon – the icon and percentage buttons in
xfce4-genmon-plugindid not pass scroll events on (the 0.9.8 fix worked only on the empty margin). You need to log out once after the update. - Launchpad highlights the app under the mouse without the grid scrolling by itself (patched
rofi, option-hover-no-scroll); Launchpad no longer lists itself. - The lock and login screens show the user's desktop wallpaper (following light/dark mode) instead of cycling other wallpapers; new default screensaver "Desktop wallpaper and clock".
- Screenshots are saved to Pictures › Screenshots, not to the desktop.
- LuxAI Account: a strong password is green (not red), and the needless "Create account" link is gone from the New account tab.
0.9.10 "Polaris" – 2026-10-24 (beta)
New
- Verified printer and scanner drivers – a new signed repository
[luxos-drivers]: vendor drivers from the AUR (Brother, Canon, Epson, Kyocera, Ricoh, Samsung, Xerox) are reviewed bydrivers/luxdrv.py(allowed vendor sources, install scripts, changes against the last approved version on every update) and built offline from verified files. 689 drivers, an index of 4,354 printer models and 233 scanner USB IDs. When you connect a printer, its driver installs by itself (e.g. Samsung Xpress M2026 →samsung-unified-driver-printer), without a password. Existing installations get the repository with thelux-engineupdate. - Community packages (AUR), safely –
lux installsearches in this order: LuxOS/Arch repositories →.luxapps → Flathub → community (AUR). The package script is checked by fixed rules (all package files, including an install script of any name; symlinks are forbidden) and by LuxAI Lite; it is built and installed in the Sandbox, into the system only with--systemor by typing the word "system" in the terminal, and never if the script is dangerous. LuxAI does not install community packages. - Flathub in lux and Lux Store – e.g.
lux install zoom; the size includes the shared runtime,lux removealso removes Flatpak apps (with confirmation) and unused runtimes, andlux updatecleans them up too.
Fixes
- A wrong password no longer locks the account – instead of the default 3 failures / 10 minutes,
pam_faillocklocks only at brute-force rate (20 failures in 30 s) for 1 minute, so a failed fingerprint or a closed lock dialog cannot lock the account. When locked, the login screen says "Too many failed attempts…" instead of "Wrong password". lux check: the database lock was released too early.
0.9.9 "Polaris" – 2026-10-24 (beta)
New
- An encrypted disk never fails silently (hook
luxos-bootinluxos-tweaks): a wrong password shows "Wrong password, try again." on the splash screen and the console, with unlimited attempts (systemd-cryptsetup@restarts after 3 failures), and there is no timeout waiting for the device while you type the password. If the system disk does not appear within 90 s or boot ends in emergency mode, a boot log is saved to the EFI partition (\EFI\LuxOS\boot-failure-*.log, last 5) and an explanation with next steps is shown. lux check(available updates without installing), manual pageman lux; lux deletes and re-downloads a corrupted downloaded package by itself (also in Lux Store).- The installer adds other systems from a shared EFI partition (Debian, Ubuntu, Fedora, …) to the boot menu and puts LuxOS first in the UEFI boot order.
- Printers whose driver is only available from the vendor (AUR, e.g. Samsung Xpress M2026/SPL): instead of a broken printer, a notification with an "Install driver" button.
- Scanner: a camera is no longer offered as a scanner, and a scanner switched on later is found by itself (search every 6 s, "Search again" button). Fingerprint: a "Try again" button after a failed scan.
Fixes
- Installing next to another system into an existing LUKS + LVM (Debian): disk unlocking at boot was missing (
rd.luks.name,sd-encrypt) and the system ended in emergency mode; installing from a configuration file stopped at the check of the locked LVM group; the name of the new volume was not saved (always "root", clashing with Debian's volume). - Installer: an eye icon on all password fields, a bigger window (encryption password fields visible without full screen).
- Ventoy in normal mode ("INIT NOT FOUND"): live ISO initramfs without the
kmshook (229 → 66 MB), ISO 2.42 → 2.10 GB. - Lux Store "Could not check for updates": on computers with a shared EFI,
lux_alpmrefused because ofHookDir(only for transactions), signature verification as the user (copy of the keys), mismatched copy of the database and its signature (now downloaded afresh). - Lux Guard does not run in the live system from USB (it warned about the installer itself).
- Launchpad and Search: no selection by hovering – no scrolling by itself, and Enter launches the first (best) match.
- "Internet is not available" after every login: the warning comes only after 20 s of continuous outage, not in the first minute.
- LuxAI 1.0.0-12: the agent does not announce an action without doing it (it nudges itself to act once), root commands without
pkexec(administrator mode).
0.9.8 "Polaris" – 2026-10-24 (beta)
New
- Brightness with the mouse wheel over the battery in the top bar (
luxos-brightness up|down, 5 % steps, at least 10 %, the same indicator as the brightness keys). Ownxfce4-genmon-pluginpackage (4.3.0-1.1) with a<scroll>command</scroll>tag. - Daylight saving time reminder (
luxos_timechangeinluxos-hub): only in time zones with a time change, the evening before (18:00) and the morning after, with a switch in Desktop and Dock › Top Bar and a Turn off button in the notification. - Lux Store: formatted update progress – step, progress bar, package list (old → new version, status), summary and restart recommendation; the technical log is under "Details".
Fixes
- LuxOS kernel on older installations: installations without
luxos-care(older installer) never switched tolinux-luxos.luxos-desktopnow requiresluxos-care, and installing it triggers the switch (outside the installer chroot). - An open top bar menu (e.g. Sound) blocked keyboard shortcuts and the right mouse button: Super, Ctrl+Alt, Alt+Tab, Alt+F4 and PrtSc shortcuts close the menu and run; the right button switches between menus like the left one; tapping Super opens Launchpad even with a menu open.
- Top bar context menus no longer start with the grey, unclickable name of the plugin (e.g. "Keyboard Layout") – GTK module
luxos-panel-menus. - Log out, restart and shut down: instead of windows with black bars (the compositor ending), the screen fades smoothly to black (
luxos-session-cover). - Battery saver no longer switches the screen to 60 Hz (the refresh rate change blanked it for a moment); optional "Lower the screen to 60 Hz" in Battery and Power.
- Launchpad scrolls by rows with the wheel instead of jumping a whole page.
- fastfetch in every new terminal window (not in a nested shell).
- CPU timer (TSC) falsely marked as unstable (e.g. Ryzen 5000 in laptops, the system then read time from the slow HPET): LuxOS Care adds
tsc=nowatchdogto the LuxOS boot entries once after boot, only on CPUs with an invariant TSC. rtkit(PipeWire without real-time priority) andwireless-regdb(Wi‑Fi without country rules) were missing – now dependencies ofluxos-desktop.- The I/O scheduler rule was also tried on partitions (a warning in the boot log).
0.9.7 "Polaris" – 2026-10-23 (beta)
New
- Lux Guard (
luxos-guard): checks files from the internet, mail, chat, LuxDrop and USB when they are run (fanotify in the kernel, marks only on watched files – other programs pay nothing). Risky ones: a dialog "Don't Run / Run in Sandbox / Run Anyway"; critical ones (deleting the home folder or a disk,dd/mkfs/shredon a disk, encrypting files in a loop, hidden code, disabling protection…): never outside the sandbox. Own rules without an antivirus (1 false alarm on 35,980 system scripts and programs). A read-only snapshot of/homeevery hour (btrfs, hourly for 24 h + 7 days), file restore in the Lux Guard window or withluxos-guard restore. Documentation also for LuxAI:docs/luxos/guard.md. - Captive portal sign-in (hotel, train, airport): in the "portal" state
luxos-hubopens the sign-in page by itself, once per connection (again via the "Sign in" button in the notification), in a one-off Firefox window with an empty in-memory profile (no cookies, passwords, history or add-ons of the user, deleted on close); the window closes once you are connected. - LuxOS kernel
linux-luxos(https://github.com/luxopes/luxos-kernel): stable Linux from kernel.org with a verified signature, Arch's configuration (all drivers) +config-luxos(BBR,NR_CPUS=512, THP on request). GitHub Actions builds a new version every 6 h, boots it in QEMU with ~50 drivers and releases it with a provenance attestation; LuxOS takes it after verification (scripts/fetch-kernel.sh) and signs it. New installations and the live ISO have it right away; older installations switch fromlinux-zenby themselves after the update (luxos-care kernel-switch: headers for DKMS, initramfs and DKMS module checks,linux-zenstays as "LuxOS (previous kernel)" and the new kernel gets 3 boot attempts). - Control Center, Calendar and
luxos-hubin LSL (LSL 0.10.6, one program instead of three in Python): 23 MB less memory (PSS), 7× less CPU at session start, the same response after a click.
Fixes
- Store: "Could not check for updates" when a LuxOS Care check was running at the same time, or after an interrupted check (lock in the temporary database). The checks now wait for each other, a leftover lock is cleaned up, and the Store shows the real reason for the error.
- ELAN fingerprint readers (e.g. 04f3:0c4f, Acer Aspire 7): "Calibration failed!" – the own
libfprintpackage gives calibration up to 100 checks (5 s) instead of 10. - LuxAI 1.0.0-11: bug reports list LuxOS packages again (query via
lux-engineinstead of the non-existentpacman).
Changes
- LuxOS repositories and downloads are at https://luxos.lux-ai.cz (
/repo/,/download/); the old addresslsl.lux-ai.cz/luxosstill works, and migration of old configurations rewrites it. lux updateruns other packages' steps after an update (/usr/lib/lux/after-update.d).lsl0.10.6 in[luxos-apps]../build.sh one PACKAGEbuilds a single package intoout/single(repository unchanged).
0.9.6 "Polaris" – 2026-10-23 (beta)
New
- LuxAI 1.0.0-10: administrator mode – Settings › Agent permissions › Administrator commands (password every time / no password with confirmation / no password and no asking; no password only with the Flash model). Hard blocks (deleting the system, formatting disks, bootloader, accounts, sudo/polkit/PAM, package signatures) always apply; log in
~/.local/state/luxai/root-commands.logandjournalctl -t luxai-root.
Speed
- Frequently run top bar programs are in LSL instead of bash (
packages/luxos-desktop/files/lsl, compiled bylslc0.10.5 at build time): battery every 20 s 9.6 ms → 1.6 ms without an awk process, app name on every window switch 7.4 ms → 1.5 ms, clock every 3 s 1.7 ms → 1.4 ms, click on Control Center and clock 4.5–5.3 ms → 1.0 ms, internet check directly from NetworkManager over D-Bus (11.6 ms → 4.6 ms). Same output and translations (TSVluxos-i18n); invalid</>markup in the app name fixed. Measurements and plan for further rewrites:docs/perf/lsl-rewrite-plan.md.
No pacman
- LuxOS no longer even has a pacman configuration: the package manager is configured in
/etc/lux/lux.confin its own format (key value,repo NAMEblocks with indentedserver/mirrors,holdinstead ofIgnorePkg,include /etc/lux/conf.d/*.conf,aur,flatpak,clean-keepsettings in the same file). Errors name the file and line;lux config check/edit/show/engine. The engine configuration/run/lux/engine.confis generated bylux-configand nobody edits it. - New locations: database
/var/lib/lux, cache/var/cache/lux/pkg, log/var/log/lux.log, keyring/etc/lux/keyring, hooks/etc/lux/hooks, mirrors/etc/lux/mirrorlist(one address per line;lux mirrorsand reflector.timer convert reflector's output). - The engine's internal tools are called
lux-engine,lux-engine-key,lux-engine-conf,lux-engine-db-upgrade(/usr/lib/lux/alpm/bin); nopacman*file in the system. The engine remains libalpm from Arch Linux. - Without
pacman-contrib,pacman-mirrorlistandexpac: own cache cleaning (lux clean, LuxOS Care), update checks into a temporary database copy (lux_alpm.py check-updates, Store,lux doctor), merging of.pacnew/.pacsave(lux configs) and the package list for the TUI and the Store. - Migration on update: the
00-lux-engine-migratehook moves the database, cache, keyring, hooks and log (by renaming, safe against power loss), converts custom repositories and options from/etc/pacman.confand the sorted mirrors; the old paths stay as links until restart, thenluxcleans them up (copy in/var/lib/lux/migrated-from-pacman/).
Changes
- The session process
luxos-daemonis now calledluxos-hub(Calendar and Control Center in the background:--background); LuxOS texts no longer use the word "daemon" (LuxDrop: "Avahi"). After the update, the new name takes effect after logging out and back in. - The
lslpackage in[luxos-apps]is 0.10.5 (targetlinux-x86_64-gnu, glib/gio/gtk modules, small programs with ~136 kB of memory). Top bar programs start in under 1 ms (battery 0.94 ms, clock 0.73 ms, app name 0.57 ms in a VM).
0.9.5 "Polaris" – 2026-10-22 (beta)
New
- The keyboard layout switches with both Shift keys by default (the previous default Alt+Shift is converted once on update, a custom choice is kept); pressing Super alone opens Launchpad (can be turned off in Keyboard Shortcuts).
- Screenshot: the name of the selected mode and its shortcut above the bar, instant tooltips on hover; a preview with Copy, Show in Files, Save As…, Delete actions; holding Ctrl while capturing copies to the clipboard.
- New Displays and Fingerprint icons.
0.9.4 "Polaris" – 2026-10-22 (beta)
Speed
- Images and icons are decoded directly in the app process: own
gdk-pixbuf2package without glycin and the SVG loaderluxos-pixbuf-svg(since gdk-pixbuf 2.44, Arch runs a bwrap sandbox + glycin process for every image; an SVG icon cost ~4 ms and 5 processes, now ~2 ms and none; login without ~40 sandboxes, Launchpad without ~120 processes, PNG 6× faster). In a VM: Dock after login in 1.9 s instead of 2.9 s, CPU after login 3.6 s instead of 5.2 s. - luxos-hub creates the hidden Control Center and Calendar windows only after the session settles (or on the first click), gpg-agent is no longer killed and restarted at login (it runs via systemd), the wallpaper after login takes a single xfconf query, top bar script translations without loading the whole table (battery every 20 s: 70 ms → 10 ms), the LuxOS Care check after boot runs at low priority, shorter splash fade-out (0.3 s).
Fixes
- Fingerprint: the window has a title bar with a close button again; an unknown reader error shows the technical reason. A new check
scripts/check-titlebars.shverifies the title bar of all apps. - Control Center always fits on the screen (longer translations are shortened, the window is repositioned after a resize).
0.9.3 "Polaris" – 2026-10-22 (beta)
New
- Full battery saver: no CPU turbo, 60 Hz display, lower brightness, no animations, audio and USB power saving, paused background tasks (the system part runs as a service with a polkit rule). Data saver also pauses reflector and key synchronisation on a metered connection.
- Battery and Power: "Don't sleep while playing music or video" (closing the lid only turns off the screen); charge cycle count – and it says so when the battery does not report it.
- Terminal:
about os,about system,adduser,deluser,addgroup,delgroup,service,update-grub,lsb_release; hints forapt,dnf,ifconfig,netstatand more. - Bluetooth: renaming the computer. Installer: optional secure erase of the target space (in hardware or with zeros).
- macOS-style Alt+Tab.
Fixes
- Playback controls in Control Center respond instantly (MPRIS events instead of polling).
- Lock screen after wake-up: no black bar at the bottom and no shifted dialog (an xfce4-screensaver bug, fixed with a GTK module).
- Window names "What's New" and "Screenshot" in the top bar.
0.9.2 "Polaris" – 2026-10-22 (beta)
New
- More keyboard layouts in the installer (text and graphical) and a Keyboard Layout app: settings for all users and the login screen, choice of switching keys.
- Keyboard shortcuts: change, disable, custom shortcuts, conflict check, restore defaults.
- Newly connected headphones / speakers (Bluetooth, USB, HDMI) become the sound output right away.
Fixes
- Older installations update without "unresolvable package conflicts" (lux and LuxOS Care depend on a generic package engine; lux-engine replaces it only with the new lux).
- The keyboard flag in the top bar opens Keyboard Layout.
0.9.1 "Polaris" – 2026-10-22 (beta)
New
- Screenshot: a floating bar (Print, Shift+Super+5) – full screen, window, selection, recording the screen or a selection, options (where to save, timer, pointer); Shift+Super+3/4 directly.
- Displays: resolution, refresh rate, rotation (with a 15 s confirmation) and text size.
- Fingerprint login (login screen, lock screen, sudo, authorisation prompts); Fingerprint app.
- What's New: after updating to a new version, the news is shown at the first login (also in About This Computer).
lux configs: merging new versions of configuration files.
Changes
- lux is the only package manager: there is no
pacmancommand in the system, the package engine is thelux-enginepackage (formerlyluxos-pacman). - Login screen: the wallpaper does not change when switching users, the profile slides smoothly.
- Store: "Update All" only when there are updates, a check error (network) is reported.
- Control Center: estimated remaining battery time; clicking the brightness icon opens Displays.
- Translucent notifications following light/dark mode.
- fastfetch: LuxOS Desktop and LuxOS Terminal instead of the Xfce names.
0.9.0 "Polaris" – 2026-10-22 (beta)
The first numbered version.
Look and desktop
- A macOS-style desktop on top of Xfce: top bar with menus and window icons, Dock, Launchpad, Search, Control Center, notifications, calendar.
- Own LuxOS icons, wallpapers and logo, light/dark/automatic mode, boot splash and login screen.
- LuxOS Setup Assistant at the first login.
Apps
- LuxOS Store, LuxAI (with a LuxAI account), Lux Code, LSL IDE, Calculator, Camera, Scanner, Printers and Scanners, Drivers, System Monitor, Bluetooth, Battery and Power, Vault (encrypted folder), LuxDrop (LocalSend-compatible), Feedback.
System
lux– own package manager on top of libalpm (instead of the pacman command), signed[luxos]and[luxos-apps]repositories.- Automatic hardware and driver detection (NVIDIA by generation including older cards, sound, cameras, Wi‑Fi), printing and scanning without setup.
- Out-of-memory protection (earlyoom), data and battery saver, automatic maintenance.
- 13 languages.
Installer
- Whole disk, free space next to another system, an existing partition, or manual partitioning (LVM, LUKS2, separate partitions).
- App sets (Everyday, Programming, Video and Photo, Games, Security and Networking).
- LuxAI account right in the installer: sign-in with a password, a code from e-mail, or creating a new account.